Home > Anaheim > Brushless DC > Anaheim Brushless DC MDC050050051 Brushless DC Controller Users Guide

Anaheim Brushless DC MDC050050051 Brushless DC Controller Users Guide

Add to Favourites
    Download as PDF

    View the Anaheim Brushless DC MDC050050051 Brushless DC Controller Users Guide for free. All the Anaheim manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 September 2012 L0104421 MDC050-050051 Series 50V, 5A Brushless Controller User’s Guide 910 East Orangefair Lane, Anaheim, CA 92801 e-mail: info@anaheimautomation.com(714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com ANAHEIM AUTOMATION
    Page 2 September 2012 L0104422 MDC050-050051 Driver Features • Open Loop Operation • 1.5V to 4V External Voltage Speed Control • 5V/10KHz External PWM Speed Control • 2-Quadrant Operation • Hall Sensor Feedback • Short Circuit Protection • Maximum Current Limit at 5.0 Amps (peak) • Run/Stop, Freewheel and Direction Input • TTL-CMOS Compatible Inputs • Compact Size • Screw Type Terminal Block General Description The MDC050-050051 driver is designed to drive DC Brushless motors at currents of up to 5A...
    Page 3 September 2012 L0104423 Specifi cations Control Inputs: (TB1, Pins 1-3) TTL-CMOS Compatible Logic “0” = 0-0.8VDC Logic “1” = OPEN All Three inputs (run/stop, freewheel, and direction) are pulled up through 10k Ohm resistors. Direction Control: (TB1, Pin 1) Logic “1” (open) - Clockwise Logic “0” - Counterclockwise Freewheel: (TB1, Pin 2) Logic “1” (open) - Motor is Enabled Logic “0” - Motor is de-energized and will coast to a stop Run/Stop: (TB1, Pin 3) Logic “1” (open) - Motor will not run Logic “0” -...
    Page 4 September 2012 L0104424 Freewheel The motor freewheel feature allows the de-energized of the motor phases. A high (open) input at this input causes the motor to run at the given speed, while a low at this input causes the motor to coast to a stop. Motor Run/Stop The motor run/stop feature allows the stopping of a motor by shorting out the bottom drives of the three phases. A low at this input allows the motor to run, while a high (open) input does not allow motor operation and if operating causes...
    Start reading Anaheim Brushless DC MDC050050051 Brushless DC Controller Users Guide

    Related Manuals for Anaheim Brushless DC MDC050050051 Brushless DC Controller Users Guide

    All Anaheim manuals