Anaheim Brush DC BDA56C050 Spec Sheet

							FEATURES
SPECIFICATIONS
910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990     Fax. (714) 992-0471     www.anaheimautomation.com
DIMENSIONS
L010637
BDA-56C-050 - Permanent Magnet DC MotorsBDA-56C-050 - Permanent Magnet DC Motors
• DC Brush Motor
• Designed for High Torque Brush Applications
• Provides Constant Torque at Various Speeds
• Up to 288 oz-in of Torque
• NEMA Frame Size 56C
• Body Diameter 113mm
The 56C Frame DC Motors provide a cost-effective solu-
tion for your application.  The BDA-56C-050 can be used 
anywhere from power pulleys, belts, pumps to water heat-
ing and other machine applications.  The BDA-56C-050 
has strong permanent magnets to provide the torque you 
need.  The BDA-56C-050 1/2 HP motor can provide up to 
288 oz-in of torque.  Cooling vents on the motor casing 
are placed optimally for internal cooling of the motor.
Model #Armiture 
Voltage
(V)No Load 
Speed
(RPM)Current
(A)Power
(W)Torque
(oz-in)Body 
Diameter
(mm)Pilot 
Diameter
(mm)Pilot 
Depth
(mm)Shaft
Length
(mm)Shaft 
Diameter
(mm)Motor 
Length
(mm)
BDA-56C-050-90V-1800 90 1815 5.2 373 288 113 114.3 3.02 51.24 15.86 257
BDA-56C-050-90V-2500 90 2500 5.3 373 288 113 114.3 2.97 52.32 15.86 257
BDA-56C-050-180V-1800 180 1800 2.6 373 288 113 114.3 2.95 49.26 15.86 257 
						

							DISCLAIMER
910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990     Fax. (714) 992-0471     www.anaheimautomation.com
Important Notes: The information provided herein was known to be accurate upon 
publication; however, specifi cations can be changed over time, and most likely will vary 
between manufactures.  Some of these differences are substantial.  Therefore, a customer 
must verify all critical parameters of an application before selecting a product.
This Cross Reference List is offered to assist the customer in choosing Anaheim Automa-
tion’s products.  However, any selection, quotation, or suggestion for any product, offered 
from Anaheim Automation’s staff, its’ representatives or distributors, are only to assist the 
customer.  In all cases, determination of fi tness of the product in a specifi c system applica-
tion is solely the customers’ responsibility.  While every effort is made to offer solid advice, 
and to produce technical data and illustrations accurately, such advice and documents are 
for reference only.  Anaheim Automation is in no event liable for indirect or consequential 
damages resulting from the use or application of any product.  Improper use can result in 
personal injury or death, property damage, and/or economic loss.
Experimentation: Tailoring
Please be advised that experimentation is almost always necessary for motion control 
components because of dynamic changes in system friction and inertia, (load anomalies) 
that may be diffi cult to calculate.  For example, a stepper motor resonance effects can also 
change when the stepper motor is coupled to its load.  At Anaheim Automation, we encour-
age customers to experiment with several options for optimal system performance.