AMT Datasouth Printer Accel 7450 User guide pdf

ACCEL-7450 
 
- 41 - 
 
Error messages  
Function errors 
Function errors indicate a serious problem that cannot be recovered by 
the user. The printer can report 12 types of functional errors. 
When a function error occurs, turn the power off, remove paper from 
inside the printer then turn the printer back on.  
If the message remains after the above procedure, contact AMT 
Datasouth for assistance. 
 
 
 
 
 
Operational error message  
  ONLINE lamp blinks. The print head has 
become too hot during...

ACCEL-7450 
 
- 42 - 
 
 
 
 
 
 
 Paper has jamed at tractor. Pull any wrinkled 
paper out, reload paper in the tractors then 
press the ONLINE key to restart printing.  
 When the PAPER JAM error message 
appears despite there being no actual paper 
jam, set menu #26 PAPER JAM DETECT to 
NO.  
  
  A cut sheet did not eject properly. Remove 
the paper manually. 
 This also naturally occurs at the end of a print 
job or EJECT/LOAD function and the paper 
has not yet been removed from the paper...

ACCEL-7450 
 
- 43 - 
 
 
 
 
 
 
 
 
 
 
 
  This error occurs if the front cover is opened and 
causes the ONLINE lamp to blink. 
 Closing the front cover clears the error.  
 Press the ONLINE key to put the printer back 
online (ONLINE lamp on steady).  
 
 
 
 
 
The jam sensor is defective. 
 
 Press the ONLINE key to clear the error. 
 Press the EJECT/LOAD key to unload paper as 
needed. 
 Make sure the jam sensor on the tractor is clear of 
paper pieces and is clean. 
 Reload fanfold paper....

ACCEL-7450 
 
- 44 - 
 
Printer Specifications  
Printing Method  Serial Impact Dot Matrix  
Flatbed, Straight Paper Path 
Print Head  24 Pin  
Max Print Line  13.6”  
Multipart Printing  Up to 7 Part  
.020” Max Thickness 
Cut Sheet Loading Automatic 
Optical Paper Detection 
Optical Paper Edge Detection 
Dark Forms Load mode (no paper detectionF 
Paper Paths  Rear Tractor   
Front Cut Sheet 
Control Panel Selectable  
Paper Exit Front or Rear Exit 
Head Gap Adjustment  Auto, with Manual Override...

ACCEL-7450 
 
- 45 - 
 
  
Power AC 120 V, 60Hz (USA and Canada)  
  
Power consumption  LQ  110W  
 Standby 40W   
 Sleep        14W 
  
Operating temperature  41 to 104ºF  
 
Operating humidity  40 to 90% (Non condensing)  
 
Operating Noise 58dBA (LQ print mode) 
 
Rear Operating 
Clearance 
 
Fanfold Paper: 2” plus Paper Length 
Manual Cut Sheets: Paper Length Minus 9” 
Dimensions  25”(w) x 18.3”(d) x 11.6”(h)  
 
Weight  
 
51lb  
 
 
Paper specifications  
  
Fanfold Paper  3” to 15” wide  
  
Cut...