Home > Amptron > Alternator > Amptron ATB700 user manual

Amptron ATB700 user manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Amptron ATB700 user manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 21 Amptron manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Add page 1 to Favourites
    image text
    Enable zoom 
    							 ALTERNATOR  TEST  BENCH
 ATB700  
ALTERNATOR OUTPUT
           CURRENT
Range:  0-100 Amperes
          BATTERY VOLTAGE 
                 SELECTOR
Range:  select 12 or 24 V
Battery cables outlets right hand side of bench
Easy transportable normal door entry 
(bench top model)Working area covered with a  rubber mat
Bench fully isolated from battery poles
Starter test free run
Full set of test leads
Low cost efficient electrical 
test bench for fleet owners, 
cars, LDVs etc. 
DC POWER SOURCE
2 x 12 volt 50 Amp/Hr Batteries  (not supplied)
Battery shelf with cables fitted with post connectors for easy installation. 
FIELD CURRENT SUPPLY
Voltage range: 13.8 V fixed
Current range: 0-5 A variable
Meter: 0 - 10 Amperes Analog only
REGULATOR TEST
6 wire D plug with harness
Range: 12/24 Volt: Test  most
new generation regulatorsMeter:  0-30Volt Analog and
digital simultaneous
DIODE TEST
Test Voltage 99 V pp
Green LED:  goodRed LED:     Faulty
ALTERNATOR OUTPUT
            CURRENT
0- 100 A  Analog and digital
simultaneous. With normal and 
reverse selector switch
BATTERY VOLTAGE
Range:  0-30 Volt Analog only
Digital selectable
ALTERNATOR 
FAULT LAMPS
  12 or 24 voltVOLTAGE SELECTOR
Range: 12 or 24 V
BATTERY LOAD TESTER
  & STARTER CURRENT
         ( FREE RUN)
       Manual selected: Dinse socket & plugRange: 0-250A  0- 500A
 
 With normal and reverse
 selector switch
ALTERNATOR LOAD
 20 Block 500 amp carbon 
pile variable unit
Selected digital only 
EXTERNAL VOLTMETER
DESIGNED AND MANUFACTURED IN SOUTH AFRICA
Appearance And specifications listed in this brochure are subject to change without notice
Measurements done: analog with digital voltmeter 
display units: Analog  109 x 66   Digital 4 digit 96 x 48 
With range voltage 99.99  
     
INDICATING INSTRUMENTS
UNIT DIMENSIONS  H x W x D   520 x 990 x 830
DRIVE SYSTEM
Rotation: REV  OFF  FWD  Rotary
switch.. Motor 2.2 KW high torque
Motor pulley:   accommodate V and 
flat belts  diameter: 120 mmBelt driven with tension lever
AC POWER  SOURCE
Voltage:         220 Volt AC
Phases:          1 PhaseFrequency:    50 HertzPower consumption:  2.2 KWMains switch: 1 pole 16A MCB
Mains lead:    5 meter 1.5 sq3 Wire with earth & neutral
SOLENOID VOLTAGE
Manual  push  button operating 
a solenoid with overloadMCB 32 A Range:  12 or 24 V MPTRONA
    All Amptron manuals Comments (0)

    Related Manuals for Amptron ATB700 user manual