Home > Ames True Temper > Hose > Ames True Temper NeverLeak by AMES Metal wall mount hose reel 2398110 User Manual

Ames True Temper NeverLeak by AMES Metal wall mount hose reel 2398110 User Manual

Add to Favourites
    Download as PDF

    View the Ames True Temper NeverLeak by AMES Metal wall mount hose reel 2398110 User Manual for free. All the Ames True Temper manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 OWNER’S MANUAL DEcORA tivE MEtAL W ALL MOUNt HOSE REEL MANUAL DEL PROPiE tARiO PORt AMANgUERA DEcORAtivO y ME táLic O DE PARED tOOLS REQUiRED 13mm Wrench Powered Hand Drill or Hammer Drill with 3/8” (10mm) Masonry Drill Bit Small Hammer or Mallet Powered Hand Drill with 1/4”(6mm) Standard Drill Bit #3 Phillips Screwdriver HERRAMiENt AS REQUERiDAS Llave inglesa de 13 mm Taladro eléctrico o taladro percutor con broca para concreto de 10 mm (3/8 pulg.) Martillo o mazo pequeño Taladro eléctrico...
    Page 2 ITEMA R T. A R T. QT Y QUANT CANT. DESCRIPTION DESCRIPCIÓN PART NUMBER NUMÉRO DE PIÈCE NÚMERO DE PIEZA 1 1Leader Hose Extensión de manguera 7517103 2 1Hardware Pack Paquete de ferretería RD-HSE-05624 3 1Crank Knob Botón de manivela RD-HSE-03196 4 1Inlet Tube with Seals Tubería de entrada con sellos RD-HSE-03205 5 1Locking Lever Palanca de cierre RD-HSE-03263 - 4Lag screws Tornillos largos ––– - 4Anchors Anclajes ––– For replacement parts, contact: Pour obtenir des pièces de rechange, veuillez...
    Page 3 ASSEMBLy: ENSAMBLAJE: Instructions: • Remove leader hose from the reel. • Verify placement of rubber washers in leader hose couplings. • Install one end of the leader hose to the water inlet tightening the threaded coupling by hand. Reference Figure 2. Instrucciones: • Retire la extensión de manguera del carrete. • Verifique la colocación de las arandelas de hule en los acoplamientos de la extensión de manguera. • Instale un extremo de la extensión de manguera a la...
    Page 4 iNStALLA tiON (cont.): iNSt ALAciÓN (A c ONtiNUA ciÓN): tools Required: #3 Phillips Screwdriver Powered Hand Drill with 1/4”(6mm) Standard Drill Bit Instructions: • Determine the mounting hole locations using the mounting template provided on the product carton. ⚠CAUTION - To prevent damage or injury, be sure to verify that holes align with stud locations in the wall. • Drill four (4) holes 2” (50mm) deep. • Locate unit over holes and secure with lag screws provided....
    Start reading Ames True Temper NeverLeak by AMES Metal wall mount hose reel 2398110 User Manual

    Related Manuals for Ames True Temper NeverLeak by AMES Metal wall mount hose reel 2398110 User Manual

    All Ames True Temper manuals