American Audio USBSD card PLAYER Media Operator User Manual

©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 11
24. AUDIO OUT R & L - The Master Output includes a pair XlR B AlA nc ED jA ck S (25) as well as 
a pair of RCA Unbalanced Jacks. The RCA jacks send a low current unbalanced output signal. Use 
these  jacks  to  send  standard  audio  to  a  mixer  or  receiver.  The  red  colored  jack  represents  the  right 
channel output and white jack represents the left channels output.
25.  B ALANCED   XLR  MASTER  O...

©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 12
 gENEraL  fUNCTiONS aND  CONTrOLS (Cont.)
D. LCD DISPLAY PANEL (FIGURE 3)
27.  CUE  INDICATOR  - This  indicator  will  glow 
when the unit is in CUE mode and will flash every 
time a new CUE POINT is set.
28. FOLDER INDICATOR - This will indicate which 
folder you are in. 
29.  T IME  BAR  INDICATOR  - This bar gives a visual 
approximation  of  a  track's  remaining  time.  This  bar 
will begin to flash...

©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 13
Figure 8: Turning the TRAck knoB (6) clock-
wise will take you to the next track.
 BaSiC OPEraTiONS
Figure 4: To eject the SD Card press the SD card "in" until it "pops" out. To disconnect a USB drive, stop playback 
and "pull out" the USB connection. 
Figure 7: Turning the TRAck knoB (6) counter-
clockwise will take you to the previous track.
2. SELECTING FOLDERS  AND TRACkS
Select  a...

5. STOPPING  PLAYBACk - Figures  9  & 
10
Stopping  playback  will  not  stop  the  read-
ing  mechanism,  but  merely  pause  or  cue  the 
track, this function allows the unit to begin play 
instantly.  There  are  two  ways  to  stop  (pause) 
playback:
1) Press the plA y/pAUSE BUTTon (14) dur- 
 ing playback. This will pause playback at 
 the exact same point the plA y/pAUSE 
 BUT  Ton (14) was pressed. 
2) Press the cUE BUTTon (15) during play- 
    back. This will pause playback and return 
 the...

©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 15
 BaSiC OPEraTiONS (CONT.)
7. FRAME SEARCH 
This  feature  allows  you  to  scroll  through  a  track  frame  by  frame,  allowing  you  to  find  and  set  a  starting  cue 
or  loop  point.  To  use  the  scroll  function  you  must  first  be  in  Pause  Mode  (see  section  4)  or  Cue  Mode  (see 
section 8). Once you are in Pause or Cue mode, press the SEARch BUTTonS (19) to scroll through the track...

©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 16
Press  the in  BUTTon  (8).  This  will  set 
the  starting  point  of  the  SEAMLESS 
LOOP. The in BUTTon LED will blink.
Press plAy/pAUSE  BUTTon  (14) to  acti-
vate playback mode.
Figure 15
Figure 14
 BaSiC OPEra TiONS (CONT.)
9. CREATING  AND PLAYING  A SEAMLESS LOOP 
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this 
loop to create dramatic effect in your...

 BaSiC OPEraTiONS (CONT.)
©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 17
10. EXITING A LOOP - To exit a SEAMLESS 
LOOP,  press  the oUT  BUTTon  (8).  The 
in  BUTTon and oUT  BUTTon LEDs  will 
remain  on,  but  will  stop  flashing.  Music 
playback  will  resume  normal  play.  The  but-
ton LEDs  will  remain  on  to  remind  you  that 
a loop is stored in memory.
Figure 17
11. R EPLAY  LOOP - The RE loop  (8) function 
allows  you  to  return  to  your...

©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 18
4. Pressing the ADv. TRAck BUTTon (18) at 
anytime, will cancel this function.
13. ADVANCE TRACk SEARCH
You can find the desired track you would like to play during the playback/pause. 
1. Press the ADv. TRAck BUTTon (18) 
to enter advance track search mode. The 
TRAck inDicAToR (41) will flash in the 
LCD. Turn the TRAck knoB (6) to search 
for your desired track within the current 
folder. NOTE: If your...

©American Audio®   -   www.americanaudio.us   -   Media Operator™ Instruction Manual Page 19
14. PRESET MENU: 
The  Media  Operator  has  a  PRESET  MENU 
where  you  can  access  AUTO  MUTE,  AUTO 
TALK OVER, RESET ALL, or you can "display" 
the FIRMWARE VERISION.  Press  and  hold 
the FolDER knoB  (5)  for  2  secs.  to  enter 
PRESET  mode.  Turn  the FolDER knoB  (5) 
to scroll through the PRESET MENU. 
Figure 26
Figure 24
Figure 27
AUTO MUTE: 
When this function is activated the MIC input...

Figure 28
Figure 29
VIEW THE TITLE CONTENT: 
You  are  able  to  view  the  ARTIST,  BIT  RATE, 
TITLE  NAME,  and  FILE  NAME  of  the  current 
song  playing.  To  view  this  information  press 
the TRAck knoB (6).  
 PrESET  MENU (CONT .)
FIRMWARE VERSION: 
Enter  PRESET  MENU,  and  then  turn  the 
FolDER knoB (5) until VXX.XX is displayed. 
"X's" are the version number. Once you have 
seen  the  version  number  turn  the FolDER 
knoB  (5) counter  clockwise  so  the  PRESET 
is...