American Audio Speaker CPX 10A User Manual

							©American Audio®   -   www.AmericanAudio.us   -  CPX Speakers   -   Instruction Manual Page 11
CPX Speakers                                         Available Accessories
Speaker Rigging Hardware - American Audio® car-
ries an assortment of rigging hardware specially de-
signed to work with the CPX Speakers.  Warning: 
Mounting and/or suspension of loudspeakers requires 
experienced professionals. Improperly installed loud-
speakers can result in property damage, personal 
injury and/or liability to the installing contractor. Al-
ways ensure that the hardware can bare more than 
the speaker load.
SPS-1B - Speaker Stands  - American Audio® carries the SPS-1B speak-
er stand, which can be used to raise the speakers during use The SPS-1B 
is a sturdy aluminum tri-pod and includes a mounting socket bracket for 
added security. The SPS-1B can raise the speaker to a maximum height 
of six feet and has a maximum weight capacity of 80 pounds. SPS-1B; 
weight = 6lbs, pipe diameter - 1 3/8”
Speaker Rigging Hardware – The CPX Speakers may be permanently installed or mounted 
using any of the available third party wall brackets and ceiling mounts available. Always be sure to 
follow all safety instructions and guidelines included with the mounting hardware for safe and proper 
installation. American Audio® carries an assortment of rigging hardware specially designed to work 
with the CPX Speakers. Please contact your dealer for more information and availability. 
						

							©American Audio®   -   www.AmericanAudio.us   -  CPX Speakers   -   Instruction Manual Page 12
1-YEAR LIMITED WARRANTY
A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be    
 free of manufacturing defects in material and workmanship for a period of \
1 Year (365 days) from  
 the date of purchase. This warranty shall be valid only if the product is purchased within the    
 United States of America, including possessions and territories. It is t\
he owner’s responsibility to  
 establish the date and place of purchase by acceptable evidence, at the time service is sought. 
B. For warranty service, send the product only to the American Audio® factory. All shipping charges
 must be pre-paid. If the requested repairs or service (including parts replacement) are within the   
 terms of this warranty, American Audio® will pay return shipping charges only to a designated 
 point within the United States. If the entire instrument is sent, it must be shipped in its original
 package. No accessories should be shipped with the product. If any accessories are shipped 
 with the product, American Audio®  shall  have no liability whatsoever for loss of or damage to 
 any such accessories, nor for the safe return thereof.  
C. This warranty is void if the serial number has been altered or removed; if the product is modified 
 in any manner which American Audio® concludes, after inspection, affects the reliability of the 
 product; if the product has been repaired or serviced by anyone other than the American Audio® 
 factory unless prior written authorization was issued to purchaser by American Audio®; if the 
 product is damaged because not properly maintained as set forth in the instruction manual. 
D. This is not a service contract, and this warranty does not include maint\
enance, cleaning or peri-
 odic check-up. During the period specified above, American Audio® will replace defective parts 
 at its expense, and will absorb all expenses for warranty service and repair labor by reason of 
 defects in material or workmanship. The sole responsibility of American Audio® under this war-
 ranty shall be limited to the repair of the product, or replacement thereof, including parts, at the
 sole discretion of American Audio®. All products covered by this warranty were manufactured    
 after January 1, 1990, and bear identifying marks to that effect. 
E. American Audio® reserves the right to make changes in design and/or improvements upon its
 products without any obligation to include these changes in any products theretofore manufac-
 tured. 
F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup-
 plied with products described above. Except to the extent prohibited by applicable law, all 
 implied warranties made by American Audio® in connection with this product, including warran-
 ties of merchantability or fitness, are limited in duration to the warranty period set forth above. 
 And no warranties, whether expressed or implied, including warranties of merchantability or 
 fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s
 sole remedy shall be such repair or replacement as is expressly provided above; and under no
 circumstances shall American Audio® be liable for any loss or damage, direct or consequential,
 arising out of the use of, or inability to use, this product.  
G.  This warranty is the only written warranty applicable to American Au\
dio® Products and super-
 sedes all prior warranties and written descriptions of warranty terms an\
d conditions heretofore    
 published. 
CPX Speakers                                                     Warranty 
						

							©American Audio®   -   www.AmericanAudio.us   -  CPX Speakers   -   Instruction Manual Page 13
Model: American Audio® CPX 8A
Dimensions:   11.75” (L) x 10.5” (W) x 18” (H) / 295mm x 265mm x 452mm
Weight:   31 Lbs. / 14 kgs 
Fuse:  7 Amp
Environmental conditions: Operational temperature:  5 to 35˚C (41 to 95˚F)    
        Operational humidity:  25 to 85% RH (non-condensation)    
       Storage temperature:  -20 to 60˚C (4 to 140˚F)
Frequency Response:   30Hz - 18KHz  
Nominal Dispersion:   90° x 60°
Built-In Bi-Amplifier:  200W
Amplifier Section:
Power supply:   AC 115v/60Hz or 230v/50Hz  
Accessories:   I.E.C. Power Cord
Low Frequency:   8” (210mm), 2” (50mm) Voice Coil
High Frequency:  25mm Voice Coil, 1” (25mm) Throat
Input Sensitivity:  
Line:  0.5V
Mic:  9m V
Output Sensitvity:   93dB(1m/1w)
Max. SPL:  112dB
Input Impedance:  
Balanced:  Line 20K Ω, Mic 3.6K Ω
Unbalanced:  Line 10K Ω, Mic 1.8K Ω
Crossover:
Low Pass:  2nd Order Filter 2.7KHz @ 12dB/octave
Low Cut:  2nd Order Filter 30Hz @ 12dB/octave
S/N Ratio:   Line 100dB, Mic 80dB
Channel Equalizer:
Bass:  100Hz +12dB
Treble:  10KHz +12dB
CPX Speakers                              Technical Specifications
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment. 
Please turn off all electrical products when they are not in use. To 
avoid power consumption in idle mode, disconnect all electrical 
equipment from power when not in use. Thank you! 
						

							Model: American Audio® CPX 10A
Dimensions:   13.75” (L) x 12.75” (W) x 20.5” (H) / 347mm x 320mm x 516\
mm
Weight:   40 Lbs. / 17.95 kgs 
Fuse:  7 Amp
Environmental conditions: Operational temperature:  5 to 35˚C (41 to 95˚F)    
        Operational humidity:  25 to 85% RH (non-condensation)    
       Storage temperature:  -20 to 60˚C (4 to 140˚F)
Frequency Response:   30Hz - 18KHz  
Nominal Dispersion:   90° x 60°
Built-In Bi-Amplifier:  250W
Amplifier Section:
Power supply:   AC 115v/60Hz or 230v/50Hz  
Accessories:   I.E.C. Power Cord
Low Frequency:   10” (255mm), 2” (50mm) Voice Coil
High Frequency:  25mm Voice Coil, 1” (25mm) Throat
Input Sensitivity:  
Line:  0.5V
Mic:  9m V
Output Sensitvity:   93dB(1m/1w)
Max. SPL:  114dB
Input Impedance:  
Balanced:  Line 20K Ω, Mic 3.6K Ω
Unbalanced:  Line 10K Ω, Mic 1.8K Ω
Crossover:
Low Pass:  2nd Order Filter 2.7KHz @ 12dB/octave
Low Cut:  2nd Order Filter 30Hz @ 12dB/octave
S/N Ratio:   Line 100dB, Mic 80dB
Channel Equalizer:
Bass:  100Hz +12dB
Treble:  10KHz +12dB
CPX Speakers                              Technical Specifications
©American Audio®   -   www.AmericanAudio.us   -  CPX Speakers   -   Instruction Manual Page 14 
						

							Model: American Audio® CPX 12A
Dimensions:   15” (L) x 14.25” (W) x 23” (H) / 378mm x 360mm x 580mm
Weight:   48 Lbs. / 21.4 kgs 
Fuse:  7 Amp
Environmental conditions: Operational temperature:  5 to 35˚C (41 to 95˚F)    
        Operational humidity:  25 to 85% RH (non-condensation)    
       Storage temperature:  -20 to 60˚C (4 to 140˚F)
Frequency Response:   30Hz - 18KHz  
Nominal Dispersion:   90° x 60°
Built-In Bi-Amplifier:  500W
Amplifier Section:
Power supply:   AC 115v/60Hz or 230v/50Hz  
Accessories:   I.E.C. Power Cord
Low Frequency:   12” (312mm), 2.5” (65mm) Voice Coil
High Frequency:  34mm Voice Coil, 1” (25mm) Throat
Input Sensitivity:  
Line:  0.5V
Mic:  9m V
Output Sensitvity:   95dB(1m/1w)
Max. SPL:  116dB
Input Impedance:  
Balanced:  Line 20K Ω, Mic 3.6K Ω
Unbalanced:  Line 10K Ω, Mic 1.8K Ω
Crossover:
Low Pass:  2nd Order Filter 2.7KHz @ 12dB/octave
Low Cut:  2nd Order Filter 30Hz @ 12dB/octave
S/N Ratio:   Line 100dB, Mic 80dB
Channel Equalizer:
Bass:  100Hz +12dB
Treble:  10KHz +12dB 
CPX Speakers                              Technical Specifications
©American Audio®   -   www.AmericanAudio.us   -  CPX Speakers   -   Instruction Manual Page 15 
						

							Model: American Audio® CPX 15A
Dimensions:   18” (L) x 15.5” (W) x 27” (H) / 456mm x 390mm x 680mm
Weight:   62 Lbs. / 28 kgs 
Fuse:  7 Amp
Environmental conditions: Operational temperature:  5 to 35˚C (41 to 95˚F)    
        Operational humidity:  25 to 85% RH (non-condensation)    
       Storage temperature:  -20 to 60˚C (4 to 140˚F)
Frequency Response:   30Hz - 18KHz  
Nominal Dispersion:   90° x 60°
Built-In Bi-Amplifier:  500W
Amplifier Section:
Power supply:   AC 115v/60Hz or 230v/50Hz  
Accessories:   I.E.C. Power Cord
Low Frequency:   15” (390mm), 2.5” (75mm) Voice Coil
High Frequency:  44mm Voice Coil, 1” (25mm) Throat
Input Sensitivity:  
Line:  0.5V
Mic:  9m V
Output Sensitvity:   97dB(1m/1w)
Max. SPL:  118dB
Input Impedance:  
Balanced:  Line 20K Ω, Mic 3.6K Ω
Unbalanced:  Line 10K Ω, Mic 1.8K Ω
Crossover:
Low Pass:  2nd Order Filter 2.7KHz @ 12dB/octave
Low Cut:  2nd Order Filter 30Hz @ 12dB/octave
S/N Ratio:   Line 100dB, Mic 80dB
Channel Equalizer:
Bass:  100Hz +12dB
Treble:  10KHz +12dB 
NOTES:
The specifications are subject to change to any improvement by negotiations in advance.
The parts are subject to change to any improvement within the range of the specifications.
CPX Speakers                              Technical Specifications
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment. 
Please turn off all electrical products when they are not in use. To 
avoid power consumption in idle mode, disconnect all electrical 
equipment from power when not in use. Thank you!
©American Audio®   -   www.AmericanAudio.us   -  CPX Speakers   -   Instruction Manual Page 16 
						

							©American Audio® World Headquarters:
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: 323-582-3322  Fax: 323-725-6100
Web: www.AmericanAudio.us  E-mail: [email protected]
American DJ Europe
Junostraat 2
6468 EW Kerkrade
Netherlands
[email protected] / www.adj.eu
Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99