American Audio Mixer QMX2BPM User Manual
Here you can view all the pages of manual American Audio Mixer QMX2BPM User Manual. The American Audio manuals for Mixer are available online for free. You can easily download all the documents as PDF.
Page 2
Q-MX2 BPM Main Features • Equipped with high quality Crossfader (Replaceable) • VCA Fader for Q-Start Control • Adjustable Crossfader Curve - changes from a normal curve to a quick curve (for crabbing) • Multi-Channel Assignable Crossfader • 2 Headphone Outputs • Selectable Voltage 115v~230v • 3 Channel Mixer • 3 Phono, 3 Line, 3 Auxiliary Inputs • 3 Microphone Input - (1) XLR/ 1/4" combo plug, (2) 1/4" Input Jacks • Fader "Q" Start on all three channels • On/Off Switch...
Page 3
American Audio - www.americanaudio.us - Q-MX2 BPM User Instructions page 3 1. Be sure to save the packing carton in case you may ever have to return the unit for service. 2. Read all documentation before attempting to operate your new mixer. Please save all your documentation for future reference. 3. Do not spill water or other liquids in to or on to your mixer. 4. Be sure that the local power outlet matches that of the required voltage for your mixer. 5. Do not attempt to...
Page 4
1. FEATHER FADER PLUS™ CROSSFADER - Blends the output signals of any channels assigned to X or Y. When the fader is in the full X position, the output signal of any channels assigned to X will be controlled by the master volume level. The same fundamentals will apply for Y. Sliding the fader from one position to another will vary the output signals of the X and Y channels respectively. When the crossfader is set in the center position, the output signals of both the X a\ nd Y channels will...
Page 5
This is an effect used heavily by scratchers and performer DJ's. The mixer simulates this effect when you hold down the X and Y fader buttons. The speed of the transform is preset and will only effect any channel assigned to the fader assign button being depressed. 4. CHANNEL FADER - These faders are used to control the output signal of any source assigned to its particular channel. 5. SPLIT CUE - This button will activate the "Split Cue" function. When used...
Page 6
Turn the knob counter-clockwise to decrease a value or clockwise to increase a value. 14. LED LEVEL INDICATORS - The dual LED's indicators along the top of unit are used to detail either the master output level or a combination of the master output level and the cue PFL level. The position of the LED Level Indicator Function Switch (15) will determine the LED Level Indicator's display mode. In the "MASTER" (down) position the meter will detail the out level of the left...
Page 7
24. AC VOLTAGE SELECTOR - Select between 115V/50Hz or 230V/60Hz. Make sure that the selector is set to the proper voltage you are using. 25. BALANCED XLR MAIN OUTPUTS - The Master Output includes a pair XLR Balanced Jacks as well as a pair RCA Unbalanced Jacks (30). The 3-pin XLR jacks send a high current balanced output signal. These jacks should be used when you will be driving an amp or other audio equipment with a balanced input, or whenever you will be running a signal line greater...
Page 8
31. AC CONNECTION - This connection is used for your detachable AC power cord. Be sure to only plug your unit in to the recommended power supply. 32. RCA MAIN OUTPUTS - The Master Output includes a pair XLR Balanced Jacks (23) as well as a pair RCA Unbalanced Jacks . The RCA jacks send a low current unbalanced output signal. These jacks should only be used for shorter cable runs to signal processors or looping to another mixer. For cable runs greater than 10 feet use the XLR...
Page 9
INPUTS/OUTPUTS The MX-1 allows you two types of output connectors Balanced XLR (25) and Unbalanced RCA (32, 33, and 34) . Use these connection to connect the output signal from a mixer, cross-over or EQ to your MX-1 mixer. A balanced connection is recommended for cable runs longer that 10ft. When constructing your own XLR cables follow the pin con fi guration describe below for proper connections. For cable runs shorter than 10Ft. you may choose the RCA unbalanced output option. The unbalanced...