American Audio Mixer QD1 Pro User Manual

18. baLa N ce D 1/4”  M aster   OutPut  Jacks  - The  Master  Output  includes  a  pair  of 1/4” 
Balanced  jacks  as  well  as  a  pair  of r C a u nbalan Ced  Ja Cks  (27).  The  3-pin  XLR  jacks  send  a 
high current balanced output signal. These jacks should be used when you will be driving an amp or 
other audio equipment with a balanced input, or whenever you will be running a signal line greater 
than 15 feet. Always, use these jacks whenever possible. 
19.  PL aY er  a  c ON trOL - This jack...

the right channel input and the white represents the left channel input. The output level for any device 
connected to these input jacks will be controlled by Fader Channel 1.
22.  cHaNNeL 1: LiNe 1  rca iNPut Jacks - These Jacks are used for line level inputs. Connect CD 
players such as the American Audio® CDS-1™ or tape decks to LINE inputs. Line level musical instru-
ments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE 
inputs. Turntables should only be...

  Q-D1  PRO                                                                  Ty PICaL  M Ix ER   SET -UP
©American Audio®   -   www.AmericanAudio.us   -   Q-D1 PRO Instruction Manual Page 13
TURNTABLE 

  Q-D1  PRO                                                                       Ty PICaL  M Ix ER   SET -UP
Speaker Cables
Stereo RCA to RCA Patch Cable
©American Audio®   -   www.AmericanAudio.us   -   Q-D1 PRO Instruction Manual Page 14
GX300 Amplifier 

due to fog residue, smoke, and dust, cleaning the mixer should be carried out periodically to optimize 
light output.  
1.   Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2.    Use a cleaner specially designed for electronics to spray in and around the knobs and switch.     
 This will reduce small particle built up that can effect the proper operation of the mixer. 
3.   Cleaning should be carried out every 30-60 days.
4.  Always be sure to dry all parts completely before...

1-yEaR LIMITED WaRRaNTy
A.  American Audio® hereby warrants, to the original purchaser, American Audio® products to be free 
of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date 
of purchase. This warranty shall be valid only if the product is purchased within the United States of 
America, including possessions and territories. It is the owner’s responsibility to establish the date and 
place of purchase by acceptable evidence, at the time service is...

Technical Specifications - Model:  Q-d1 Pro, 2 Channel audio Mixer.
POWER SUPPLy:          AC 9v/1000mA.
DIMENSIONS:           219(W) * 255(D) * 100(H) mm
WEIGhT:             4.62 Lbs./2.1 Kgs
CROSSFaDER:           Low Residue Resistanced Crossfader.
POWER CONSUMPTION:      13.5W w/full headphone output
hEaDPhONE IMPEDaNCE:      32 Ohms
ENVIRONMENTaL CONDITION:    Operating Temperature 5 to 35 deg. C
              Humidity 25 to 85% RH (non-condensing)
input/Output impedance & sensitivity...

  Q-D1  PRO                                                                                             S PECIFICaTIONS
©American Audio®   -   www.AmericanAudio.us   -   Q-D1 PRO Instruction Manual Page 18
usb input t est condition:         
TEST SOURCE:             0dB 1KHz, Mp3 Formatted
SaMPLING FREQUENCy :         44.1 KHz
BIT RaTE:               128 Kbps 

©American Audio®
A Division of American DJ® 
American Audio World Headquarters:
4295 Charter Street 
Los Angeles, CA 90058 USA
Tel: 323-582-2650 Fax: 323-582-2610
Web: www.AmericanAudio.us E-mail: [email protected]