American Audio Microphone WM 700HH User Manual

WM-700HH or WM-700LAV
User Guide
6122 S. Eastern Ave
Los Angeles Ca. 90040
                          (323) 582-2650
                   Fax (323) 582-2610
 web:   www.AmericanAudio.us
700 Channel Selectable Wireless Microphone or Lavalier
 Rev. 1/08 

©American Audio®   -   www.americanaudio.com   -   WM-700™ Instruction Manual Page 2
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated dangerous voltage within theproducts...

Every WM-700HH™  and WM-700LAV™  has 
been  thoroughly  tested  and  has  been  shipped 
in  perfect  operating  condition.  Carefully  check 
the  shipping  carton  for  damage  that  may  have 
occurred during shipping. If the carton appears 
to  be  damaged,  carefully  inspect  your  wire-
less  microphone  for  any  damage  and  be  sure 
all  equipment  necessary  to  operate  the  wire-
less microphone has arrived intact. In the event 
damage  has  been  found  or  parts  are  missing, 
please...

Introductions: Congratulations and thank you for purchasing the American Audio® WM-700HH™ or 
WM-700LAV™. These wireless systems are a representation of American Audio’s continuing commit-
ment to produce the best and highest quality audio products possible at an affordable price. Please 
read and understand this manual completely before attempting to operate your new wireless micro-
phone. Please carefully read and understand the instructions in this manual thoroughly before attempt-
ing to operate...

BALANCED
POWER
UNBALANCED
AUDIOOUTPUT
LINEMICSQUELCHDC  ONLY12V  500mA
FREQCHP4P3CHGPP1P2
SCANMANUAL
C7C8
RFMHz
C5C4C1C2C3
PRESET
C6SET
AFVOLUMEDCOUT

©American Audio®   -   www.americanaudio.com   -   WM-700™ Instruction Manual Page 5
   WM-700™                           RECEIvER CONTROLS ANd FUNCTIONS
1.  Power Button - Press this button for 4 seconds to turns On the receiver.
2.  LCd Screen - The LCD screen will show the channel number, AF & RF signal strength,\
 Frequen-    
 
cy level, and setup...

©American Audio®   -   www.americanaudio.com   -   WM-700™ Instruction Manual Page 6
   WM-700™                   RECEIvER CONTROLS ANd FUNCTIONS CONT .
6.  Antennas - Receives RF signals from the transmitter.
7.  12v dC Input - Connect the included power supply to this input, or any other 12v power \
adapter.
8.  Squelch Adjustment - The squelch adjusts the output level to prevent external noise. If you s\
et 
the squelch to high you will reduce the range of the system. Set the squ\
elch to a minimum...

©American Audio®   -   www.americanaudio.com   -   WM-700™ Instruction Manual Page 7
   WM-700™                                                    MIC SYSTEM  OPERATION
1.  Plug the receiver in and press the power button for 2 seconds to turn “On” the receiver.  
Note: Make sure the squelch on the receiver is turned the minimum before switching on        
 
the power.
2.  Set your desired mode by pressing and holding the UP or DOWN buttons. Every 2 seconds the    
     receiver will switch to the next...

   WM-700™                                                        LA vALIER  OPERATION
Receiver Set Up
1.  Plug the included power supply into the DC input connector on the ba\
ck of the receiver.
2.  Plug the other end of the power supply into an power outlet.
Note: Make sure the squelch on the receiver is turned the minimum.
Lavalier Set Up
1.  Insert two AA batteries into the back battery compartment of the lav\
alier bodypack. 
2.  Connect the headset to the bodypack via the attached mini XLR...

©American Audio®   -   www.americanaudio.com   -   WM-700™ Instruction Manual Page 8
   WM-700™                                                         TROUBLE  ShOOTING
Trouble Shooting: Listed below are common problems you may encounter, and their solutions.
There is no power to the unit:
1.   Make sure you have connected the power cord to a 120v wall outlet.
There is little or no sound:
1.   Make sure the battery is inserted properly (+/- battery terminals must match transmitter termi 
nals).
2....

1-YEAR LIMITEd WARRANTY
A.	 American	Audio®	hereby 	warrants, 	to 	the 	original 	purchaser, 	American 	Audio®	products 	to	
be 	free 	of 	manufacturing 	defects 	in 	material 	and 	workmanship 	for 	a 	period 	of 	1 	Year 	(365 	days)	
from 	the 	date 	of 	purchase. 	This 	warranty 	shall 	be 	valid 	only 	if 	the 	product 	is 	purchased 	within 	the	
United 	States 	of 	America, 	including 	possessions 	and 	territories. 	It 	is 	the 	owner’s 	responsibility 	to	
establish 	the 	date 	and 	place 	of...