American Audio Loudspeaker PXI 12P User Manual
Have a look at the manual American Audio Loudspeaker PXI 12P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 120 American Audio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
©American Audio® - www.AmericanAudio.us - PXI 12P™ - Instruction Manual Page 11
PXI 12P™ Rigging and Mounting Options
Speaker Rigging Hardware – The
PXI 12P™ may be permanently installed or mounted using
any of the many available third party wall brackets and ceiling mounts available. Always be sure to
follow all safety instructions and guidelines included with the mounting hardware for safe and proper
installation. American Audio
® carries an assortment of rigging hardware specially designed to work
with the PXI 12P
.™ The Z-APX/B is a heavy-duty bolt and may be used to secure the speaker to a
cable or chain. The Z-APX/H is a heavy-duty eyebolt and is used to suspend or secure the speaker
using safety cables. Please contact your dealer for more information and availability.
Rigging Points – The PXI 12P™ include four rigging points.
These points are detailed on page six. The rigging points are used
to “fly” or suspend the speaker in the air by some means.
Pole Mounting – The PXI 12P™ also include a pole mount option. The
pole mount socket located on the bottom of the speaker may be used
to secure the speaker to a speaker tri-pod, such as the American Audio
®
SPS-1B as illustrated on the left. Always be sure to follow the guidelines
listed below when pole mounting your speaker;
• Always be sure the stand is designed to support the weight of
the speaker
• In outdoor situations that are prone to windy conditions and
strong wind gust, be sure to use sandbags as additional tri-pod
support, this will greatly reduce the risk of tipping
• Do not stack speakers on top of each other when mounting on
a tri-pod. Only one speaker should be mounted to a tri-pod at one
time.
• Always position the tri-pod legs away from foot traffic
• Extend the tri-pod legs to their fully extended position to avoid
accidental tipping
• Observe and follow all safety guidelines and regulations specified
by the tri-pod’s manufacturer
• Be sure the tri-pod is situated on a flat, level, and stable surface
• Always tighten all tri-pod locks
Pole Mount Locking Screw – This screw is located on the rear of
the speaker and is attached to the pole mount socket. Always use this
screw to secure the speaker in place when mounting this speaker in a
pole mount configuration. Always be sure to tighten down on this screw
to prevent the speaker from shifting directions during use.
Floor Monitor Brackets - These brackets are help- ful for DJ’s and bands to help moniter their sound during a performance. This is also an alternative to standing the speaker straight up or mounting it on a stand. These brackets slide into each end of the speaker. Each speaker has its own special sized floor bracket. ©American Audio® - www.AmericanAudio.us - PXI 12P™ - Instruction Manual Page 12 PXI 12P™ Rigging and Mounting Options
©American Audio® - www.AmericanAudio.us - PXI 12P™ - Instruction Manual Page 13 PXI 12P™ Available Accessories APX-B - Speaker Carry Case - A rugged gig bag with rollers, an adjustable pull out handle, and a heavy duty zipper. Designed to protect your speaker from damage and the environment during transportation and stor - age. Z-APX/B 7 Z-APX/H - Speaker Rigging Hardware - American Audio ® carries an assortment of rigging hard- ware specially designed to work with the PXI 12P .™ The Z-APX/B is a heavy-duty bolt and may be used to se - cure the speaker to a cable or chain. The Z-APX/H is a heavy-duty eyebolt and is used to suspend or secure the speaker using safety cables. SPS-1B - Speaker Stands - American Audio ® carries the SPS-1B speak- er stand, which can be used to raise the speakers during use The SPS-1B is a sturdy aluminum tri-pod and includes a mounting socket bracket for added security. The SPS-1B can raise the speaker to a maximum height of six feet and has a maximum weight capacity of 80 pounds. SPS-1B; weight = 6lbs, pipe diameter - 1 3/8” PXI BR12 - Wall Mounting Brackets - This bracket is helpful for mounting the PXI 12P to a trussing setup or a wall . This is also an alternative to mounting it on a stand. These brackets bolt into the top and bottom of the speaker. Each speaker has its own special si zed bracket.
©American Audio® - www.AmericanAudio.us - PXI 12P™ - Instruction Manual Page 14 1-YEAR LIMITED WARRANTY A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the American Audio ® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American Audio ® will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, American Audio ® shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American Audio ® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American Audio ® factory unless prior written authorization was issued to purchaser by American Audio ®; if the product is damaged because not properly maintained as set forth in the instruction manual. D. This is not a service contract, and this warranty does not include maintenance, cleaning or peri- odic check-up. During the period specified above, American Audio ® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American Audio ® under this war- ranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American Audio ®. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. E. American Audio ® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufac- tured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup- plied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American Audio ® in connection with this product, including warran- ties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American Audio ® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. G. This warranty is the only written warranty applicable to American Audio® Products and super- sedes all prior warranties and written descriptions of warranty terms and conditions heretofore published. P XI 12P™ Warranty
©American Audio® - www.AmericanAudio.us - PXI 12P™ - Instruction Manual Page 15
Model: American Audio® PXI 12P™ - Professional
Powered Sound Reinforcement Loud Speaker
Speaker Section:
Dimensions: 12” (L) x 15.5” (W) x 22” (H) / 305mm x 393mm x 559mm
Weight: 53.5 Lbs. / 20 kgs
Environmental conditions: Operational temperature: 5 to 35˚C (41 to 95˚F)
Operational humidity: 25 to 85% RH (non-condensation)
Storage temperature: -20 to 60˚C (4 to 140˚F)
Frequency Response: 40KHz - 20KHz (-3dB)
Crossover: 3,500 HZ
Nominal Dispersion: 90˚ x 50˚ (HXV)
Amplifier Section:
Power supply: AC 115v/230v, 50/60Hz
Power consumption: 12 Watts Typical
Accessories: I.E.C. Power Cord
Input Sensitivity
Line: 80mV
Microphone:
5mV
Output Sensitivity:
96.5 ± 2dB/m/w
Channel Equalizer:
Bass: +/-12dB
Treble: +/-12dB
NOTES:
The specifications are subject to change to any improvement by negotiations in advance.
The parts are subject to change to any improvement within the range of the specifications.
P XI 12P™
Technical Specifications
©American Audio A Division of the American DJ Group of Companies American Audio World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.AmericanAudio.us E-mail: [email protected]