Home > American Audio > Loudspeaker > American Audio Loudspeaker DLT15A User Manual

American Audio Loudspeaker DLT15A User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual American Audio Loudspeaker DLT15A User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 120 American Audio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							©American Audio®   -   www.AmericanAudio.us   -  DLT-15A   -   Instruction Manual Page 11
    DLT-15A                                                     Looping Speakers
    To Next DLT-15A (If Applicable)
    From Mixer
    DLT-15A Looping 
    						
    							©American Audio®   -   www.AmericanAudio.us   -  DLT-15A   -   Instruction Manual Page 12
    DLT-15A                                                                    Mounting \
    Options
    Pole Mounting – The DLT-15A also include a pole mount option. The 
    pole mount socket located on the bottom of the speaker may be used 
    to secure the speaker to a speaker tri-pod, such as the American Audio® 
    SPS-1B as illustrated on the left. Always be sure to follow the guidelines 
    listed below when pole mounting your speaker;
         • Always be sure the stand is designed to support the weight of 
            the speaker
         • In outdoor situations that are prone to windy conditions and 
            strong wind gust, be sure to use sandbags as additional tri-pod
            support, this will greatly reduce the risk of tipping
         • Do not stack speakers on top of each other when mounting on 
            a tri-pod. Only one speaker should be mounted to a tri-pod at on\
    e
            time.
         • Always position the tri-pod legs away from foot traffic
         • Extend the tri-pod legs to their fully extended position to avoid
            accidental tipping
         • Observe and follow all safety guidelines and regulations specified
            by the tri-pod’s manufacturer
         • Be sure the tri-pod is situated on a flat, level, and stable surface 
         • Always tighten all tri-pod locks. 
    						
    							©American Audio®   -   www.AmericanAudio.us   -  DLT-15A   -   Instruction Manual Page 13
    DLT-15A                                                  Available Accessories
    Speaker Rigging Hardware - American Audio® car-
    ries an assortment of rigging hardware specially de-
    signed to work with the DLT-15A.  Warning: Mounting 
    and/or suspension of loudspeakers requires experi-
    enced professionals. Improperly installed loudspeak-
    ers can result in property damage, personal injury 
    and/or liability to the installing contractor. Always en-
    sure that the hardware can bare more than the speak-
    er load.
    SPS-1B - Speaker Stands  - American Audio® carries the SPS-1B speak-
    er stand, which can be used to raise the speakers during use The SPS-1B 
    is a sturdy aluminum tri-pod and includes a mounting socket bracket for 
    added security. The SPS-1B can raise the speaker to a maximum height 
    of six feet and has a maximum weight capacity of 80 pounds. SPS-1B; 
    weight = 6lbs, pipe diameter - 1 3/8”
    Speaker Rigging Hardware – The DLT-15A may be permanently installed or mounted using any 
    of the available third party wall brackets and ceiling mounts available. Always be sure to follow all 
    safety instructions and guidelines included with the mounting hardware for safe and proper installa-
    tion. American Audio® carries an assortment of rigging hardware specially designed to work with the 
    DLT-15A. Please contact your dealer for more information and availability. 
    						
    							©American Audio®   -   www.AmericanAudio.us   -  DLT-15A   -   Instruction Manual Page 14
    1-YEAR LIMITED WARRANTY
    A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be    
     free of manufacturing defects in material and workmanship for a period of \
    1 Year (365 days) from  
     the date of purchase. This warranty shall be valid only if the product is purchased within the    
     United States of America, including possessions and territories. It is t\
    he owner’s responsibility to  
     establish the date and place of purchase by acceptable evidence, at the time service is sought. 
    B. For warranty service, send the product only to the American Audio® factory. All shipping charges
     must be pre-paid. If the requested repairs or service (including parts replacement) are within the   
     terms of this warranty, American Audio® will pay return shipping charges only to a designated 
     point within the United States. If the entire instrument is sent, it must be shipped in its original
     package. No accessories should be shipped with the product. If any accessories are shipped 
     with the product, American Audio®  shall  have no liability whatsoever for loss of or damage to 
     any such accessories, nor for the safe return thereof.  
    C. This warranty is void if the serial number has been altered or removed; if the product is modified 
     in any manner which American Audio® concludes, after inspection, affects the reliability of the 
     product; if the product has been repaired or serviced by anyone other than the American Audio® 
     factory unless prior written authorization was issued to purchaser by American Audio®; if the 
     product is damaged because not properly maintained as set forth in the instruction manual. 
    D. This is not a service contract, and this warranty does not include maint\
    enance, cleaning or peri-
     odic check-up. During the period specified above, American Audio® will replace defective parts 
     at its expense, and will absorb all expenses for warranty service and repair labor by reason of 
     defects in material or workmanship. The sole responsibility of American Audio® under this war-
     ranty shall be limited to the repair of the product, or replacement thereof, including parts, at the
     sole discretion of American Audio®. All products covered by this warranty were manufactured    
     after January 1, 1990, and bear identifying marks to that effect. 
    E. American Audio® reserves the right to make changes in design and/or improvements upon its
     products without any obligation to include these changes in any products theretofore manufac-
     tured. 
    F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup-
     plied with products described above. Except to the extent prohibited by applicable law, all 
     implied warranties made by American Audio® in connection with this product, including warran-
     ties of merchantability or fitness, are limited in duration to the warranty period set forth above. 
     And no warranties, whether expressed or implied, including warranties of merchantability or 
     fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s
     sole remedy shall be such repair or replacement as is expressly provided above; and under no
     circumstances shall American Audio® be liable for any loss or damage, direct or consequential,
     arising out of the use of, or inability to use, this product.  
    G.  This warranty is the only written warranty applicable to American Au\
    dio® Products and super-
     sedes all prior warranties and written descriptions of warranty terms an\
    d conditions heretofore    
     published. 
    DLT-15A                                                              Warranty 
    						
    							Model: American Audio® DLT-15A - Professional Powered Sound Reinforcement  
                Loud Speaker
    Speaker Section:
    Dimensions:   17.5” (L) x 17.5” (W) x 28.75” (H) / 445mm x 445mm x 730mm
    Weight:   60 Lbs. / 27 kgs 
    Environmental conditions: Operational temperature:  5 to 35˚C (41 to 95˚F)    
            Operational humidity:  25 to 85% RH (non-condensation)    
           Storage temperature:  -20 to 60˚C (4 to 140˚F)
    Frequency Response:   40KHz - 20KHz + (±10dB)  
    Crossover:  2,100 HZ
    Nominal Dispersion:   90˚ x 40˚ (H x V)
    Amplifier Section:
    Power supply:   AC 115v/230v, 50/60Hz  
    Power consumption:   23 Watts (Stand By)
            300 Watts Max Power
    Accessories:   I.E.C. Power Cord
    Input Sensitivity:   .775V
    Output Sensitvity:  97.4 ±2dB/m/w
    Max. SPL:  124dB
    Input Impedance:
    Balanced:  10KΩ
    Unbalanced:  20KΩ
    Crossover:
    Low Pass:  1917Hz, -3dB 24dB/oct
    Low Cut:   2194Hz, -3dB 24dB/oct
    S/N Ratio:   >80dB
    Channel Equalizer:
    Bass:  +/-15dB
    Mid:   +/-12dB 
    Treble:  +/-15dB 
          
    NOTES:
    The specifications are subject to change to any improvement by negotiations in advance.
    The parts are subject to change to any improvement within the range of the specifications.
    DLT-15A                                       Technical Specifications
    ©American Audio®   -   www.AmericanAudio.us   -  DLT-15A   -   Instruction Manual Page 15 
    						
    							©American Audio® World Headquarters:
    6122 S. Eastern Ave. Los Angeles, CA 90040 USA
    Tel: 323-582-3322  Fax: 323-725-6100
    Web: www.AmericanAudio.us  E-mail: [email protected]
    American DJ Europe
    Junostraat 2
    6468 EW Kerkrade
    Netherlands
    [email protected] / www.americandj.eu
    Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99 
    						
    All American Audio manuals Comments (0)

    Related Manuals for American Audio Loudspeaker DLT15A User Manual