American Audio CDMp3 PLAYER UCD100 User Manual

C. LCD DiSPLaY -
24. CUE  INDICATOR  - this  indicator  will  glow  when  the  unit  is  in  CUE  mode  and  will  flash  every  time  a  new 
CUE POInt is set.
25. FOLDER DISPLAY - this indicates which folder you are in. 
26. TIME METER - these indicators will detail the current Minutes, Seconds, and  frames. the meter will dis-
play either the elapse, total, or remaining time of a track or the entire disc.  the display time will depend on the 
selected  time  function. the  selected  time  function...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 12
 fuNCTiONS aND CONTrOLS -  rEMOTE
39.  SOURCE  SELECTOR  - Press  this  button  to  select  your  desired  playback  source.  Select  either 
CD Player, USB 1, or USB 2. the source indicator LED will light when the selected source is activate. 
You can also use this button to record a demo from the current playing track. 
40. IN, OUT, & RELOOP -
IN BUTTON -  “CUE On tHE fLY” - this function allows you to set a CUE POInt...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 13
 fuNCTiONS aND CONTrOLS -  rEMOTE
44. KEY  LOCK - this button is used to toggle the Master  tempo function on and off.
45.  MUTE  BUTTON - this button is used to mute playback.
46. vOLUME  CONTROL BUTTONS - these buttons are used to adjust the volume of internal attenu-
ator.
47.  FOLDER  SEARCH  BUTTONS - these buttons are used to scroll through the different folders on 
your MP3 disc or USB device.
48.  TRACK  SEARCH...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 14
 BaSiC OPEraTiON
figure 3 - 3 in. / 8cm discfigure 2 - 5 in. / 12cm disc
2. LOADING DISCS
the UCD-100 can play both 3 inch (8 cm) and 5 inch (12 cm) compact discs (CD’s). Odd shaped and oval CD’s 
are not compatible. When loading a CD into the unit always hold the disc by its' edges and place it in the disc 
tray. never touch the signal surface (the glossy side). When using 5 inch/12 cm discs, place the disc in the...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 15
figure 6
5. SELECTING TRACKS
Select a desired track by using the FOLDEr/traCk kNOb (14). Press the FOLDEr/traCk  buttON (14) so 
that the fOLDER LED is NOt lit. Rotate the FOLDEr/traCk kNOb (14) clockwise to select the next track, or 
rotate the knob counter-clockwise to select the previous track. When you are using the knob to select a new 
track during playback (a track already playing) the new track you selected will...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 16
6. STARTING PLAYBACK
Insert an audio CD as describe on the previous page (LOaDiNG DiSCS). Pressing the PLay/PauSE buttON 
(15) with an audio CD inserted will immediately start playback.  the point at which playback starts (cue point) 
will automatically be stored in the memory as the cue point.  the unit will return to this cue point (the point at 
which playback started) when the CuE buttON (16) is pressed. 
 BaSiC...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 17
11. FRAME SEARCH 
this feature allows you to scroll through a track to 
set a cue, or loop point.  to use the scroll function 
you  must  first  be  in  Pause  Mode  or  Cue  Mode. 
Once  you  are  in  Pause  or  Cue  mode,  use  your 
finger  tip  or  hand  to  turn  the JOG  WhEEL  (18) 
to  scroll  through  the  track  (figure  11).  turning  the 
wheel  in  a  clockwise  direction  will  advance  the 
frame  search...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 18
 BaSiC OPEraTiON
12. CHANGING THE TIME  DISPLAY (26)/TIME  BAR (27):
the time may be displayed in three different modes;  total Remain, Remain, and Elapsed. During normal play-
back, pressing the tiME buttON (5) as in figure 14, will change the time display information (26) in the LCD. 
the following is a break down of the time settings and their definitions:    
1)   tOt AL REMAIn (34) -  this details the time in the...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 19
activating the Pitch Slider (8): 
to activate the PitCh  SLiDEr (8), you must turn the 
pitch  function  on.  Press  the PitCh  buttON  (10) 
for  at  least  2  seconds  to  turn  on  the  pitch  function, 
when  the  pitch  function  is  activated  the PitCh  LED 
(9) will begin to glow. If the pitch function is not acti-
vated the PitCh SLiDEr (8) will not function.
13. PITCH  ADJUSTMENTS
this  function  will...

©American Audio®   -   www.americanaudio.com   -   UCD-100 Instruction Manual Page 20
14. PITCH BEND
this  function  will momentarily increase  or  decrease  a  tracks  playback  speed  using  the (-)  &  (+) PitCh  but-
tONS (11). the maximum pitch bend percentage allowed is +/-16%.  the pitch bend function will work in con-
junction with the PitCh SLiDEr 118) pitch setting.  for example, if the PitCh SLiDEr (11) is set to a 2% pitch 
gain the pitch bending process will begin at 0% and will continue to...