American Audio CDMp3 PLAYER Radius 1000 User Manual

and set effect and sample parameters, see page 24.
10. Bpm BUTTON - Press this button to switch between manual BPM and Auto BPM.
11.  TAp  BUTTON  - This  button  is  used  for  manual  BPM.  When  in  manual  BPM  mode,  press  this 
button and turn either the time (28) or ratio (23) knobs to adjust the BPM 
12. JOg WHEEL  Eff ECTS  AND CONTROLS
 NORMAL  BUTTON  - Press  this  button  to  exit  SCRATCH  mode.  When  SCRATCH  mode  is  not 
active the jog W heel (9) can be used to pitch bend.
 SCRATCH...

 gENERAL  fUNCTIONS  AND CONTROLS (Cont.)
©American Audio®   -   www.AmericanAudio.us   -   Radius 1000™ Instruction Manual Page 12
17.  f AST TRACk BUTTONS -         
        This button is used to select a track. Tapping this button will forward skip to the next track, 
holding down this button will rapidly forward skip through the tracks. 
                This  button  is  used  to  select  a  track.  Tapping  this  button  will  back  skip  on  track,  holding 
down this button will rapidly BACK...

 HOLD BUTTON - This button has two functions:
 parameter Lock: This button allows you to lock any new parameter settings you set to the ef-   
 fects. The button LED will glow red when the hold function is not selected. When the hold selec-  
 tion is not active, any changes to the effect parameters will be momentay.  
 System Lock: If you press and hold the button for 5 seconds you will activate the System Lock.   
 The button LED will flash when the HOLD function is active. To unlock the HOLD function...

 gENERAL  fUNCTIONS  AND CONTROLS (Cont.)
©American Audio®   -   www.AmericanAudio.us   -   Radius 1000™ Instruction Manual Page 14
Figure 4
B. REAR  pANEL (fIgURE 4)
31. pOWER CONNECTOR - This connection is used to connect your main power. Be sure that your 
local power matches the unit’s required power. 
32.  pOWER BUTTON - This button is used to turn your unit’s power on and off.
33.  RELAY  JACk - With this jack you can connect two CD players and relay (flip flop) play. You can 
also  connect  your...

©American Audio®   -   www.AmericanAudio.us   -   Radius 1000™ Instruction Manual Page 15
 gENERAL  fUNCTIONS  AND CONTROLS (Cont.)
C. VfD DISpLAY  pANEL (fIgURE 5)
38.  pLAY INDICATOR - The play indicator will glow when the unit is in play mode.
39. pAUSE INDICATOR - The pause indicator will glow when the unit is in pause mode.
40.  CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash every time 
a new CUE POINT is set.
41.  CHARACTER  DISpLAY - This  will  display  the...

51. fOLDER DISpLAY -  This indicator describes which folder you are in. 
52. RELOOp INDICATOR - Appears when LOOP is engaged or ready to be engaged. 
53.  SINgLE  INDICATOR  -  This  indicates  that  the  CD  drive  is  in  single  play  mode,  the  track  will  play 
once and return to CUE mode. If the single indicator is not on the unit is in continuous mode In con-
tinuous mode the drive will play all the remaining tracks on the disc. Once the remaining tracks have 
ended the unit will return to cue...

INTERNAL mENU
©American Audio®   -   www.AmericanAudio.us   -   Radius 1000™ Instruction Manual Page 17
Press and hold the folder knoB (20) for at least 2 sec. to enter the internal menu.
Press the time (28) or ratio (23)  knoBS to enter the submenus and to confirm setting; press the 
folder knoB (20) to exit the menu.
1. JOg mODE - Select JOG LED mode (mode range is 1~8)
2. Sensitivity - Touch Wheel Sensitivity Adjustment (Adjustment range is -20~+20)
3. pitch Bend - Pitch range +/-1%~100%
4. Display...

 BASIC OpERATIONS
Figure 6: press the eject button to load and remove a disc. Remeber: When loading a disc always hold the disc by it 
edges and load the disc label side up.
Figure 7: tapping the reverse 
track  button  or  turning  the 
track knob counter clockwise  
will jump back to the previous 
track.
Figure  8: tapping  the  forward 
track  button  or turning  the 
track knob clockwise  will skip 
forward to the next track.
1.  LOADINg/EJECTINg  DISCS
The  Radius  1000™  can  only  play  regular...

3. STARTINg  pLAYBACk - Figure 9
Insert  an  audio  CD  as  described  on  page  18 (loading/ejecting  diScS).  
Pressing  the play/pauSe Button  (28)  with  an  audio  CD  loaded  will  imme-
diately  start  playback.  The play  (42) indicator  will  glow  as  soon  as  playback 
begins.  The  point  at  which  playback  starts  (cue  point)  will  automatically  be 
stored in the memory as the cue point. The unit will return to this cue point (the 
point at which playback started) when the cue Button...

 BASIC OpERATIONS (CONT.)
1) You may press the in Button (15) on the fly (while the disc is playing). This
 will set a CUE Point without music interruption. Pressing the cue Button
 (14) will now return you to the same point that you pressed the in Button     
 (15). You may now store this CUE Point in any of the Bank ButtonS 1-3 
 (26).  
2) You  may  also  use  the jog  Wheel  (9) to  set  a  cue  point.  While  a  disc  is
 in  PAUSE  or  CUE  mode,  use  the jog  Wheel  (9) to  scroll  through  a...