American Audio CDMp3 PLAYER PRO DJ User Manual

Featuring:
SamplingSamplingFLIPFLOP
PRO-DJ
American Audio®
4295 Charter Street
Los Angeles Ca. 90058
Rev. 4/05
American Audio®Operating Instructions 

©American Audio®   -   www.americandj.com   -   Pro-DJ™ Instruction Manual Page 2
CAUTIONS  REGARDING  HANDLING..................................................................................................3
PRODUCT  INFORMATION....................................................................................................................5
CUSTOMER  SUPPORT  .......................................................................................................................6
S E T- U P. . .. ....

NOTE:  This  product  satisfies  FCC  regulations 
when  shielded  cables  and  connectors  are 
used  to  connect  the  unit  to  other  equipment. 
To  prevent  electromagnetic  interference  with 
electrical appliances such as radios and televi
-
sions, use shielded cables and connectors for 
connections.
NOTE:  This  CD  player  uses  a  semiconductor 
laser.    It  is  recommended  for  use  in  a  room 
at  the  following  temperature:  41˚F  -  95˚F  /  5˚C 
- 35˚C
WARNING:  TO  PREVENT  FIRE  OR...

ELECTRICAL PRECAUTIONS
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle is
intended to alert the  user  to the  presence  of important
operating  and maintenance  (servicing) instructions  in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated "dangerous voltage" within the
product's  enclosure  that may  be of sufficient...

 PRODUCT INFORMATION
©American Audio®   -   www.americandj.com   -   Pro-DJ™ Instruction Manual Page 5
This  unit has  been  thoroughly  tested  and  has 
been  shipped  in  perfect  operating  condition. 
Carefully check the shipping carton for damage 
that  may  have  occurred  during  shipping.  If 
the  carton  appears  to  be  damaged,  carefully 
inspect  your  unit  for  any  damage.  Be  sure  all 
accessories  needed  to  operate  the  unit  has 
arrived  intact.  In  the  event  damage  has...

 SET-UP
©American Audio®   -   www.americandj.com   -   Pro-DJ™ Instruction Manual Page 6
 CUSTOMER SERVICE
Customer Support:  American Audio® provides a toll free customer support line, to provide set up help and  
to  answer  any  question  should  you  encounter  problems  during  your  set  up  or  initial  operation.  You  may  also 
visit us on the web at www.americandj.com for any comments or suggestions.  For service related issue please 
contact  American  Audio
®.  Service  Hours  are  Monday...

•  8 times over sampling 1 bit D/A converter    •  6 different shuttle speeds 
•  20 Seconds Digital Anti-Shock Protection    •  30 Programmable Tracks
•  10 Programmable Cue Points        •  Bop Effect (b)
 
•  Real time Cue (“Cue on the Fly”)        •  60 Second Transport Protection 
(d)
•  Selectable Time Display          •  Memory Backup, Defaults to last setting (f)
•  S/PDIF Digital Audio RCA Coaxial Output     •  Pitch Display
•  Fader “Q” Start Control (a)        •  Single/Continuous/Repeat Play...

 GENERAL FUNCTIONS AND CONTROLS 
©American Audio®   -   www.americandj.com   -   Pro-DJ™ Instruction Manual Page 8
1. BANK BUTTONS - These buttons are used to store cue points or seamless loops. They are also 
provide direct track access. eg. Button 5 will start track number 5.
2.  MEMORY  BUTTON  -  This  button  allows  you  to  store  a  cue  point  or  seamless  loop  in  any  of  the 
BANK BUTTONS (1)
.
3. RECALL BUTTON - This button allows you to access any cue points or seamless loops stored in...

©American Audio®   -   www.americandj.com   -   Pro-DJ™ Instruction Manual Page 9
search.
7. IN REALTIME CUE (SEAMLESS LOOP IN BUTTON) -  
“CUE ON THE FLY” - This button allows 
you to set a CUE POINT (see CUE POINT page 18) without music interruption (“on the fly”). This but
-
ton also sets the starting point of a loop (see SEAMLESS LOOP on page 18).
8.          TRACK BUTTON - This buttons is used to select a track. Tapping this button will back-skip 
to the previous track, holding down this button...

 GENERAL FUNCTIONS AND CONTROLS (Cont.)
SLIDER (14) to match the BPM’s with another playing music source.   
17. (+) PITCH BEND - The (+) pitch bend function creates a momentary “BUMP” in the CD’s  p i t c h 
speed (Beats per minute - BPM) when the 
PITCH (18)  function is activated. This functions allows the 
beats between two CD’s or any other music source to match. This   is  a  momentary  function. 
When the button is depressed  the pitch speed will automatically return to the
  PITCH SLIDER'S...