American Audio CDMp3 PLAYER MP3 Flex 100 User Manual

for  a  more  precise  adjustment  use  the pitch Slider  (7)  to  match  the  BPM’s  with  another  playing 
music  source.  Holding down  this button  will give  a  maximum pitch of  the  current  pitch range  set  to 
the unit.   
12. SGL/CTN - This function allows you to choose between single track play or continuous track play 
(all  tracks  in  order).  This  function  also  operates  in FLIP-FLOP  mode.  Press  this  button  for  1  second 
to turn A.CUE on and off.
13. BANK BUTTONS 1-4 - These...

©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 12
 GENERAL FUNCTIONS AND CONTROLS (Cont.)
able. If no active loop exist, pressing the RELOOP button will return you to the last set cue point.
23. OUT BUTTON - This button is used to set the ending point of a loop. A loop is started by press-
ing  the in  Button  (24),  and  pressing  the  OUT  BUTTON  to  set  the  loop  ending  point.  The  loop  will 
continue to play until the OUT BUTTON is pressed once again.
24....

 GENERAL FUNCTIONS AND CONTROLS (Cont.)
©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 13
Figure 5
Figure 4
34
3332313029
B. REAR PANEL (FIGURE 4)
29. POWER CONNECTOR - This connection is used to connect your main power. Be sure that your 
local power matches the unit’s required power. 
30. POWER BUTTON - This button is used to turn your unit’s power on and off.
31.  RELAY  JACK - Connect  the  supplied  mini-plug  from  the  RELAY  jack  on  the  rear  of  your...

©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 14
 GENERAL FUNCTIONS AND CONTROLS (Cont.)
Figure 6
35
48
47
46
45
44
43
40
38
42
41
39
55
54
53
52
51
50
49
36
D. LCD DISPLAY PANEL (FIGURE 6)
35. RELOOP  INDICATOR - Appears when a LOOP has been activated and disappears when a LOOP 
has been deactivated. 
36. mEmORY  BUCKET  INDICATOR - This indicator serves two functions. The bucket outline details 
the  cue  memory  status,  a  full  bucket  outline  indicates  the...

©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 15
 GENERAL FUNCTIONS AND CONTROLS (Cont.)
46.  REmAIN  INDICATOR - When "REMAIN" is indicated in the lcd diSplay (28) the time  diSplay 
(44) in  the lcd will  define  the  current  track's  remaining  time.  When  "REMAIN"  is  not  indicated  in 
the lcd diSplay (28) the time  diSplay (44) in the lcd will define the track's elapsed time. When 
"TOTAL REMAIN" is indictated the time...

©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 16
 BASIC OPERATIONS
Figure  8: turning  the  track 
knob  counter-clockwise  will 
jump  back  to  the  previous 
track.
Figure  9: turning  the  track 
knob clockwise will skip for-
ward to the next track.
2. SELECTING TRACKS
Select  a  desired  track  by  using the track  knoB  (26). Turn  the  knob  clockwise  to  move  forward  a  track  or 
counter-clockwise to move back a track. If you want to select a new track...

©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 17
3. STARTING PLAYBACK - Figure 10
Load  an  audio  CD  as  describe  on  page  16 (loading/ejecting diScS).  
Pressing the play/pauSe Button (18) with an audio CD loaded will immediate-
ly  start  playback.  The play  (39) indicator  will  glow  as  soon  as  playback  begins. 
The point at which playback starts (cue point) will automatically be stored in the 
memory as the cue point. The unit will return to this cue...

8. SCANNING (FAST FORWARD / FAST REVERSE)
This  function  gives  you  a  fast  search  through  a  disc  or  track.  Press the  >> 
Search  Button  (25) to  fast  forward  or  press  the  

©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 19
Storing A Cue Point:
Once you have set your CUE Point by one of the two means listed on page 18, you may store your cue point 
in one of the Bank ButtonS (13). Once you store this cue point in memory you may recall it at any time and 
you  may  even  recall  memory  if  the  disc  has  been  removed  or  power  had  been  disconnected,  see SyStem 
memory on page 22. You may store a maximum of four cue points per...

©American Audio®   -   www.AmericanAudio.us   -   Flex 100MP3 Instruction Manual Page 20
 BASIC OPERATIONS (CONT.)
3)  Press the out Button (23) to set the ending point for your SEAMLESS 
  LOOP (Figure 20). The in Button (24) and out Button (23) LEDs will 
  immediately begin to flash rapidly, indicating the SEAMLESS LOOP mode   
  has been activated.
LCD  LOOP  INDICATORS -  During  a  seamless  loop,  the loop  (55) and 
reloop  indicatorS  (35) will  turn  on  in  the lcd  diSplay  (28) indicating  a...