American Audio CDMP3 Player CK800 User Manual

14. SEARCH BUTTONS - 
         This search button allows you to quick-
ly scan backwards through a track. 
        This search button allows you to quick-
ly scan forwards through a track. 
15.  TRACK BUTTONS - 
      This  button  is  used  to  select  a 
track. Tapping this button will forward skip to the 
next  track,  holding  down  this  button  will  rapidly 
forward skip through the tracks. 
         This  button  is  used  to  select  a 
track. Tapping this button will back skip on track,...

 GENERAL FUNCTIONS AND CONTROLS (Cont.)                                       mIxER
17. SOURCE  SELECTOR  SWITCH  - These 
switches  are  used  to  select  the  input  source 
assigned to each channel. Each channel may only 
be assigned one input source at a time. 
18.  AUx  INPUT  - This  Aux  input  is  for  the  use  of 
a  Mp3  player. Input  volume  will  be  controlled  by 
the channel two fader
19. CHANNEL GAIN CONTROL - This adjustment 
is used to adjust an audio source signal input gain 
for a...

applied to a channel signal.
 CHANNEL BASS CONTROL - This knob is 
used to adjust the low frequency levels of a chan-
nel  allowing  for  a  maximum  bass  gain  of  +12dB 
or  maximum  signal  decrease  of  -30dB.  Turning 
the  knob  in  a  counter-clockwise  direction  will 
decrease  the  amount  of  bass  applied  to  a  chan-
nel  signal,  turning  the  knob  in  a  clockwise  direc-
tion will increase the amount of bass applied to a 
channel signal.
21. mASTER  VOLUmE  LEVEL  INDICATORS  - 
The...

 GENERAL FUNCTIONS AND CONTROLS (Cont.)             FRONT & REAR PANEL
©American Audio®   -   www.AmericanAudio.us   -   CK 800Mp3 Instruction Manual Page 14
Figure 5
Figure 4
323031
B. FRONT PANEL (FIGURE 4)
30.  TRANSPORT  TRAY   1  - This  tray  is  used 
to  load  and  unload  a  compact  disc.  The  tray 
is  opened  and  closed  by  pressing  the oPEn/
CLOSE BUTTON (1). Never attempt to force the 
transport tray open or closed when the power is 
turned off.
31.  HEADPHONE  JACK  - This  jack  is...

 GENERAL FUNCTIONS AND CONTROLS (Cont.)            FRONT & REAR PANEL
©American Audio®   -   www.AmericanAudio.us   -   CK 800Mp3 Instruction Manual Page 15
36. RCA  mASTER O UTPUTS -  The RCA jacks 
send  a  low  current  unbalanced  output  signal. 
These  jacks  should  only  be  used  for  shorter 
cable  runs  to  signal  processors  or  looping  to 
another  mixer.  For  cable  runs  greater  than  15 
feet use the Xlr  Balanced  jack S (33).
37. LINE 1 INPUT JACKS - d o not connect 
turnta Ble S...

©American Audio®   -   www.AmericanAudio.us   -   CK 800Mp3 Instruction Manual Page 16
 GENERAL FUNCTIONS AND CONTROLS (Cont.)                      CD PLAYER LCD
D. LCD DISPLAY PANEL (FIGURE 6)
43.  PLAY/PAUSE  INDICATOR  -  Either  the  play 
or  pause  indicator  will  glow  depending  which  
mode you are in.
44. CUE  INDICATOR  - This  indicator  will  glow 
when  the  unit  is  in  CUE  or  mode  and  will  flash 
every time a new CUE POINT is set.
45. mP3  INDICATOR  - This  will  indicate  that...

 BASIC OPERATIONS
Figure 8: tapping the reverse 
track  button  will  jump  back 
to the previous track.
Figure  9: tapping  the  for-
ward  track  button  will  skip 
forward to the next track.
2. SELECTING TRACKS
Select a desired track by using the track ButtonS (15). Tapping the track ButtonS (15) once will select 
either  the  next  higher  or  lower  track.  You  may  hold  down  the track  ButtonS  (15) to  change  tracks  con-
tinuously at a faster speed. If you are using the track ButtonS (15)...

3. STARTING PLAYBACK - Figure 10
Load  an  audio  CD  as  describe  on  page  17 (loadIng/ejectIng  dIScS).  
Pressing the play/pauSe Button (11) with an audio CD loaded will immediate-
ly  start  playback.  The play  (43) indicator  will  glow  as  soon  as  playback  begins. 
The point at which playback starts (cue point) will automatically be stored in the 
memory as the cue point. The unit will return to this cue point (the point at which 
playback started) when the cue Button (12) is pressed.
4.  P...

 BASIC OPERATIONS (CONT.)
1) You may press the In Button (10) on the fly (while the disc is playing). This
 will set a CUE Point without music interruption. Pressing the cue Button     
 (12) will now return you to the same point that you pressed the In Button     
 (10).  
2) You may also use the jog  Wheel (9) to set a cue point. While a disc is
 in PAUSE or CUE mode, use the jog  Wheel (9) to scroll through a track
 and find your desired starting point. Once you have found your desired CUE...

 BASIC OPERATIONS (CONT.)
2) Press the In Button (10). This will set the starting point of the      
 SEAMLESS LOOP. The In Button (10) LED will light.
1) Press play/pauSe  Button (11) to activate playback     
 mode.   
Figure 16
Figure 15
©American Audio®   -   www.AmericanAudio.us   -   CK 800Mp3 Instruction Manual Page 20
3) Press the out Button (10) to set the ending point for your LOOP 
 (Figure 17). The In Button (10) and out  Button (10) LEDs will 
   immediately begin to flash rapidly,...