American Audio CDMP3 Player CK1000 User Manual

							
Featuring:
CK 1000Mp3
User Guide 
and Reference Manual
4295 Charter Street
Los Angeles Ca. 90058
www.AmericanAudio.us    4/07 
						

							
 CONTENTS
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 2
Important InformatIon......................................................................\
............................................3
ElEctrIcal  SafEty  prEcautIonS........................................................................\
.........................4
SafEty InStructIonS........................................................................\
...............................................5
VoltagE  SElEctor............................................................................................................................5
unpackIng.........................................................................................................................................6
cuStomEr  Support..........................................................................................................................6
fE atur ES...........................................................................................................................................7
SEt-up  InStallatIon.........................................................................................................................8
functIonS and controlS
  cd        p lay Er  ...................................................................................................................................9
  mIXEr ........................................................................\
................................................................12
  front  &  rEar panEl........................................................................\
....................................14
  lcd   dISplay.............................................................................................................................16
BaSIc opEratIonS
 loadIng  EjEctIng  dISc......................................................................................................17
  track  SEarcH.......................................................................................................................17
 StartIng  playBack..............................................................................................................18\
  p auSIng  playBack...............................................................................................................18
  framE  SEarcH.................................................................................................................\
......18
  SEttIng  a  cuE  poInt............................................................................................................19
  crEatIng  a  SEamlESS  loop.............................................................................................20
  cHangIng tImE  dISplay......................................................................................................21
pItcH adjuStmEntS
 pItcH  SlIdEr...............................................................................................................\
............22
 pItcH  BEndIng.......................................................................................................................23
EffEctS
 Bop  EffEct ........................................................................\
.....................................................25
 Scratc H....................................................................................................................25
accESSIng  mp3 foldErS.......................................................................\
........................................26
rElay  (flIp-flop™)..........................................................................................................................27
typIcal  mIXEr  SEt -up........................................................................\
..............................................28   
croSSfadEr  rElplacEmEnt ........................................................................\
.................................30
Warranty...................................................................................................................................31
SpEc If Icat Ion S.............................................................................................................................32
FOR BEST CD-R DISC PLAYBACK RESULTS IN THIS CD PLAYER PLEASE FOLLOW THESE 
GUIDELINES:
1. High quality CD-R Audio discs (should conform to the standards of the Orange Book 2).
2. Use a high quality bit rate when recording discs. (At least 160kbps)
3. Record discs in the slowest speed possible. (i.e. 2x or 4x speed) 
						

							
 NOTE:
This unit may cause interference to radio and  
television reception.
NOTE:
This CD player uses a semiconductor laser.  It 
is  recommended  for  use  in  a  room  at  the  fol-
lowing temperature: 41˚F - 95˚F / 5˚C - 35˚CCAUTION:
USE OF CONTROLS OR ADJUSTMENTS  OTHER 
THAN  THOSE  SPECIFIED  HEREIN  MAY  RESULT 
IN HAZARDOUS RADIATION EXPOSURE
THE  COMPACT  DISC  PLAYER  SHOULD  NOT  BE 
ADJUSTED  OR  REPAIRED  BY  ANYONE  EXCEPT 
PROPERLY QUALIFIED SERVICE PERSONNEL.
CAUTION
TO  PREVENT  ELECTRIC  SHOCK  DO  NOT  USE  THIS (POLARIZED)  PLUG  WITH  AN  EXTENSION  CORD, 
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES 
CAN  BE  CAREFULLY  INSERTED  TO  PREVENT  BLADE 
EXPOSURE
 WARNING:
 TO PREVENT FIRE OR SHOCK HAZARD, 
 DO NOT EXPOSE THIS CD PLAYER TO 
 WATER OR MOISTURE 
CAUTION:
1. Handle the power supply cord carefully. Do not   
 damage or deform; it may cause electric shock   
 or malfunction when used. Hold plug attach- 
 ment when removing from wall outlet.  Do not   
 pull on the cord.
2.   To avoid electric shock, do not open the top   
 cover when the unit is plugged in. If problems   
 occur with the unit, call your local American   
Audio® dealer.
3. Do not place metal objects or spill liquid inside   
 the CD player. Electric shock or malfunction   
 may occur.
IMPORTANT SAFETY ITEMS FOR 
U.S.A. & CANADA MODEL ONLY
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE THE COVER RACK.  
THERE ARE NO USER SERVICEABLE PARTS 
INSIDE  REFER SERVICE TO YOUR 
AUTHORIZED American Audio DEALER.
The  lightning  flash  with  an  arrow  triangular 
symbol  is  intended  to  alert  the  user  to  the 
presence of non insulated “dangerous volt-
age”  within  the  products  enclosure,  and 
may be of sufficient magnitude to constitute 
a risk of electric shock.
The  exclamation  point  triangular  symbol  is 
intended  to  alert  the  user  to  the  presence 
of  important  operating  and  maintenance 
(servicing)  instructions  in  the  user  manual 
accompanying the CD player.
CAUTION
Do not open -
Risk of electric shock
Please  carefully  read  and  understand  the 
instructions  in  this  manual  thoroughly  before 
attempting  to  operate  this  unit.  These  instruc-
tions  contain  important  safety  information 
regarding the use and maintenance of this unit. 
Take special care to follow all warning symbols 
and  labels  both  on  the  unit  and  printed  in  this 
manual. Also,  Please keep this manual with the 
unit, for future reference.
CAUTION:  TO  PREVENT  ELECTRIC  SHOCK 
DO NOT USE THIS (POLARIZED) PLUG WITH 
AN  EXTENSION  CORD,  RECEPTACLE,  OR 
OTHER  TYPE  OF  ELECTRICAL  OUTLET 
UNLESS  THE  WIDE  BLADES  CAN  BE 
CAREFULLY  INSERTED  INTO  A  MATCHING 
WIDE SLOT.
ATTENTION: POUR  PREVENIR  LES  CHOCS 
ELECTRIQUES  NE  PAS  UTILISER  CETTE 
FICHE  POLARISEE  AVEC  UN  PROLON-
GATEUR,  UNE  PRISE  DE  COURANT  OU 
UNE  AUTRE  SORTIE  DE  COURANT,  SAUF 
SI  LES  LAMES  PEUVENT  ETRE  INSEREES  A 
FOND SANS EN LAISSER AUCUNE PARTIE A 
DECOUVERT.
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 3
 ImPORTANT  INFORmATION 
						

							
ELECTRICAL PRECAUTIONS
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated dangerous voltage within theproducts enclosure that may be of sufficient magnitudeto constitute a risk of electric shock to persons.
READ INSTRUCTIONS — All the safety and operatinginstructions should be read before the product isoperated.RETAIN INSTRUCTIONS — The safety and operatinginstructions should be retained for future reference.HEED WARNINGS — All warnings on the product andin the operating instructions should be adhered to.FOLLOW INSTRUCTIONS — All operating and useinstructions should be followed.CLEANING — The product should be cleaned only witha polishing cloth or a soft dry cloth. Never clean withfurniture wax, benzine, insecticides or other volatileliquids since they may corrode the cabinet.ATTACHmENTS — Do not use attachments notrecommended by the product manufacturer as theymay cause hazards.WATER AND mOISTURE — Do not use this productnear water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement;or near a swimming pool; and the like.ACCESSORIES — Do not place this product on anunstable cart, stand, tripod, bracket, or table. Theproduct may fall, causing serious injury to a child oradult, and serious damage to the product. Use onlywith a cart, stand, tripod, bracket, or tablerecommended by the manufacturer, or sold withthe product. Any mounting of the product shouldfollow the manufacturer’s instructions, and shoulduse a mounting accessory recommended by themanufacturer.CART — A product and cart combination should bemoved with care. Quick stops, excessive force, anduneven surfaces may cause the product and cartcombination to overturn.
VENTILATION — Slots and openings in the cabinet areprovided for ventilation and to ensure reliableoperation of the product and to protect it fromoverheating, and these openings must not beblocked or covered. The openings should never beblocked by placing the product on a bed, sofa, rug,or other similar surface. This product should not beplaced in a built-in installation such as a bookcase orrack unless proper ventilation is provided or themanufacturer’s instructions have been adhered to.POWER SOURCES — This product should be operatedonly from the type of power source indicated on themarking label. If you are not sure of the type ofpower supply to your home, consult your productdealer or local power company.LOCATION – The appliance should be installed in astable location.NONUSE PERIODS – The power cord of the applianceshould be unplugged from the outlet when left un-used for a long period of time.
GROUNDING OR POLARIzATION•If this product is equipped with a polarized alternatingcurrent line plug (a plug having one blade wider thanthe other), it will fit into the outlet only one way. Thisis a safety feature. If you are unable to insert the plugfully into the outlet, try reversing the plug. If the plugshould still fail to fit, contact your electrician toreplace your obsolete outlet. Do not defeat thesafety purpose of the polarized plug.•If this product is equipped with a three-wiregrounding type plug, a plug having a third (grounding)pin, it will only fit into a grounding type power outlet.This is a safety feature. If you are unable to insert theplug into the outlet, contact your electrician toreplace your obsolete outlet. Do not defeat thesafety purpose of the grounding type plug.POWER-CORD PROTECTION - Power-supply cordsshould be routed so that they are not likely to bewalked on or pinched by items placed upon oragainst them, paying particular attention to cords atplugs, convenience receptacles, and the point wherethey exit from the product.OUTDOOR ANTENNA GROUNDING — If an outsideantenna or cable system is connected to the product,be sure the antenna or cable system is grounded soas to provide some protection against voltage surgesand built-up static charges. Article 810 of the NationalElectrical Code, ANSI/NFPA 70, provides informationwith regard to proper grounding of the mast andsupporting structure, grounding of the lead-in wireto an antenna discharge unit, size of groundingconductors, location of antenna-discharge unit,c o n n e c t i o n t o g r o u n d i n g e l e c t r o d e s , a n drequirements for the grounding electrode. See FigureA.LIGHTNING — For added protection for this productduring a lightning storm, or when it is left unattendedand unused for long periods of time, unplug it fromthe wall outlet and disconnect the antenna or cablesystem. This will prevent damage to the productdue to lightning and power-line surges.POWER LINES — An outside antenna system shouldnot be located in the vicinity of overhead power linesor other electric light or power circuits, or where itcan fall into such power lines or circuits. Wheninstalling an outside antenna system, extreme careshould be taken to keep from touching such powerlines or circuits as contact with them might be fatal.OVERLOADING — Do not overload wall outlets,extension cords, or integral convenience receptaclesas this can result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY - Never push objects ofany kind into this product through openings as theymay touch dangerous voltage points or short-outparts that could result in a fire or electric shock.Never spill liquid of any kind on the product.SERVICING — Do not attempt to service this productyourself as opening or removing covers may exposeyou to dangerous voltage or other hazards. Refer allservicing to qualified service personnel.DAmAGE REQUIRING SERVICE  - Unplug this productfrom the wall outlet and refer servicing to qualifiedservice personnel under the following conditions:• When the power-supply cord or plug is damaged.•If liquid has been spilled, or objects have fallen intothe product.•If the product has been exposed to rain or water.•If the product does not operate normally by followingthe operating instructions. Adjust only those controlsthat are covered by the operating instructions as animproper adjustment of other controls may result indamage and will often require extensive work by aqualified technician to restore the product to itsnormal operation.•If the product has been dropped or damaged in anyway.• When the product exhibits a distinct change inperformance — this indicates a need for service.REPLACEmENT PARTS -- When replacement partsare required, be sure the service technician has usedreplacement parts specified by the manufacturer orhave the same characteristics as the original part.Unauthorized substitutions may result in fire, electricshock, or other hazards.SAFETY CHECK - Upon completion of any service orrepairs to this product, ask the service technician toperform safety checks to determine that the productis in proper operating condition.WALL OR CEILING mOUNTING — The product shouldnot be mounted to a wall or ceiling.HEAT — The product should be situated away from heatsources such as radiators, heat registers, stoves, orother products (including amplifiers) that produceheat.
IMPORTANT SAFETY INSTRUCTIONS
ANTENNALEAD INWIRE
GROUNDCLAMP
ANTENNADISCHARGE UNIT(NEC SECTION 810-20)
GROUNDING CONDUCTORS(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)
ELECTRICSERVICEEQUIPMENT
Fig. A
NEC — NATIONAL ELECTRICAL CODE
C A U T I O N : T O R E D U C E T H E R I S K O F E L E C T R I C SHOCK, DO NOT REMOVE THE COVER (OR BACK). T H E R E A R E N O U S E R S E R V I C E A B L E P A R T S INSIDE  REFER SERVICE TO YOUR AUTHORIZED AMERICAN AUDIO® SERVICE TECHNICIAN.
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 4
 ELECTRICAL SAFETY PRECAUTIONS 
						

							
I. Read Instructions - All the safety and operat-
 ing instructions should be read before the CD
 Player is operated. The safety and operating 
 instructions  should  be  saved  for  future
 reference.
2.   Heed  Warnings  -  All  warnings  on  the  CD
     Player  and  in  the  operating  instructions
    should be adhered to.
3.  Water  and  Moisture  -  The  player  should  not
   be  used  near  water  -  for  example,  near  a
   bath tub, kitchen sink, laundry   tub,  in  a  wet
    basement  or  near  a  swimming  pool,  etc.
4.   Ventilation - The CD Player should be situated 
 so that its location or position does not inter-
 fere with its proper ventilation. For example,
 the  CD  player  should  not  be  situated  on
 a bed, sofa, rug, or similar surface that may
 block  the  ventilation  openings;  or,  placed  in
   a  built-in  installation,  such  as  a  bookcase
  or  cabinet  that  may  impede  the  flow  of
 air  through  the  ventilation  openings. 
5.   Heat  -  The  CD  player  should  be  situated 
 away  from  heat  sources  such  as  radiators,
 heat  registers,  stoves,  or  other  appliances
 (including  amplifiers)  that  produce  heat.
6.   Power  Sources  -  The  CD  player  should  be
   connected  to  a  power  supply  only  of  the 
  type  described  in  the  operating  instructions
  or  as  marked  on  the  CD  Player.
7.  Servicing  -  The  user  should  not  attempt
  to service  the  CD  Player  beyond  that 
 described  in  the  operating  instructions.  All 
 other  servicing  should  be  referred  to  quali-
 fied service personnel. The Player should be 
 serviced by qualified service personnel when:
     A. The power-supply cord or the plug has   
   been damaged.
     B. Objects have fallen, or liquid has been    
   spilled into the CD Player.
      C.  The CD Player has been exposed to   
   rain or water.
      D.  The CD Player does not appear to   
   operate normally or exhibits a marked   
   change in performance.
 SAFETY INSTRUCTIONS
Line Voltage Selection 
• The desired voltage may be set with the   
 VOLTAGE SELECTOR switch on the rear   
 panel (using a flat head screw driver).
• Do not force the VOLTAGE SELECTOR   
 switch as this may cause damage
• If the VOLTAGE SELECTOR switch does   
 not move smoothly, please contact a quali- 
 fied service technician.
VOLTAGE SELECTOR switch
The  serial  and  model  number  for  this  unit  is 
located  on  the  rear  panel.  Please  write  down 
the  numbers  here  and  retain  for  future  refer-
ence. 
Model No._____________________________
Serial No._____________________________
purchase  notes:
Date of Purchase_______________________
Dealer Name__________________________
Dealer Address_________________________
_________________________________________
_________________________________________
Dealer Phone__________________________
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 5 
						

							
Introduction: 
Congratulations  and  thank  you  for  purchasing  the  American  Audio®  CK  1000Mp3  CD  player.  This 
CD player/mixer is a representation of American Audio’s continuing commitment to produce the best 
and  highest  quality  audio  products  possible  at  an  affordable  price.  Please  read  and  understand  this 
manual completely before attempting to operate your new CD player. This booklet contains important 
information concerning the proper and safe operation of your new CD player.
Customer Support: 
American  Audio®  provides  a  toll  free  customer  support  line,  to  provide  set  up  help  and  answer  any 
question should you encounter problems during your initial set up or operation. You may also visit us 
on the web at www.AmericanAudio.us for any comments or suggestions. Service Hours are Monday 
through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
 Voice:    (800) 322-6337
 Fax:    (323) 582-2941
 E-mail:   [email protected]
To purchase parts online visit http://parts.americandj.com
Caution! There are no user serviceable parts inside this CD player. Do not attempt any repairs your-
self, without being instructed to do so by an authorized American Audio service technician. Doing so 
will void your manufactures warranty. In the unlikely event your CD player may require service, please 
contact American Audio® customer support.
Do not discard the packing carton in the trash. Please recycle when ever possible.
  INTRODUCTION
  U NPACKING
Every CK 1000Mp3 has been thoroughly tested and has been shipped in perfect operating condition. 
Carefully check the shipping carton for damage that may have occurred during shipping. If the carton 
appears to be damaged, carefully inspect your CD player for any damage and be sure all equipment 
necessary to operate the CD player has arrived intact. In the event damage has been found or parts 
are missing, please contact our toll free customer support number for further instructions. Please do 
not return the CD player to your dealer without first contacting customer support.
Please  be  sure  to  make  any  connections  before  plugging  the  CD  player  in  to  an  electrical  outlet.  All 
fader and volume controls should be set to zero or minimum position, before the CD player is switched 
on.  If  the  CD  player  has  been  exposed  to  drastic  temperature  fluctuation  (e.g.  after  transportation), 
do  not  switch  on  the  CD  player  immediately.  The  arising  condensation  of  water  might  damage  your 
device. Leave the device switched off until it has reached room temperature.
Operating Determinations:
•  When installing this CD player, please make sure that the device is not exposed or will not be    
 exposed to extreme heat, moisture or dust!
• Do not operate the CD player in extremely hot (more than 30°C/86°F) or extremely cold (less than   
 5°C/40°F) surroundings. 
• Keep the unit out of direct sunlight and away from heaters.
• Operate the CD player only after becoming familiar with its' functions. \
Do not permit operation by   
 persons not qualified for operating the unit. Most damages are the result of unprofessional opera-  
 tion.
  SET -UP  P RECAUTIONS
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 6 
						

							
(a) FADER “Q” START CONTROL: Set up your CK 1000Mp3 as described in the set-up section of this manual. After   
 set up is completed load your players. By moving the mixer’s crossfader from left to right you can start and pause 
 each players playback functions. For Example, when using the CK 1000Mp3 player, if your mixer’s crossfader is all   
 the way to the left (player one is playing, player two is in cue or pause mode), and you move the fader at least 20%   
 to the right, player two (2) will begin to play. When the crossfader is to the right, and you move it 20% to the left,   
 player one (1) will begin to play. You can create great effects similar to scratching with this feature. After storing cue 
 points on each side of the CD player, different  songs may quickly be recalled by moving the mixer crossfader back   
 and forth. New cue points can be easily selected on the CK 1000Mp3 player (see setting cue points page 19). “Q”   
 Start control is easy to use and mastering this feature will help you create amazing effects with your music. 
(b)  RELAY (FLIP-FLOP): Connect your CK 1000Mp3 player as described in the set-up section of this manual. This 
 feature will start the next player once one (1) player has ended. For example, if player one (1) is playing a disc and   
 it ends, player two (2) will instantly begin to play. You may set RELAY to play track to track or disc to disc. For 
 more information on this feature, see RELAY (FLIP-FLOP™) on page 27.
(c) SLEEP  mODE: The CK 1000Mp3's laser and pick-up assembly will power down after 15 minutes of inactivity   
 (when in pause or cue mode). This will lengthen the life of your motor drive and laser. To initialize the player, just 
 press the cue or play buttons.
• Plays Mp3, CD, and CD-R Discs          • Mp3 Track Listings       
• Folder Search for Mp3'             • Auto cue          
• Scratch Effect              • Sleep Mode (c)
• 1/75th second frame search         • Real time cue (“Cue on the Fly”)
• Pitch display             • Digital RCA coaxial output     
• Large bright LCD display            • Fader “Q” Start Control (a)    
• Digital Anti-Shock             • Music Master tempo     
• Jog Wheel Pitch Bend +/-100%         • Selectable Single or Continuous Play 
• Seamless Loop (uninterrupted loop playback)     • RELAY (Flip-Flop Playback) (b) 
• Aux Input              • High output to headphones
• Cue Mixing               • 2 Line Level Inputs
• 3 Band EQ per channel           • Independent Gains Per Channel
• Front Access Combo Mic Jack         • Record Out
• Extremely clean signal to noise ratio       
• Adjustable Pitch Percentages: +/-4%, +/-8%, or +/-16%
• Instant Start within 10ms (sound is produced immediately when the PLAY button is pressed)     
mAIN FEATURES
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 7 
						

							
CAUTION:
• The LCD is designed to be clearly visible within the angles shown in Figure 2. Mount the control
 unit so that the visual angle is within this range.
1. Checking the Contents      
 Be sure your CK 1000Mp3 was shipped with the following:          
 1)  CK 1000Mp3 Professional CD player/mixer
    2)  Operating instructions (this booklet).
    3)  Warranty card.
CAUTION:
• To avoid severe damage to the unit, be sure the power is off when making connections to 
 the unit.
 SET -UP
CAUTION:
• The player will work normally when the main unit is mounted with the front panel within 15
 degrees of the vertical plane If the unit is tilted excessively, discs may not be loaded or unloaded   
 properly. (Figure 1)
Figure 1
 
15˚
Figure 2
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 8
FOR BEST CD-R DISC PLAYBACK RESULTS IN THIS CD PLAYER PLEASE FOLLOW THESE 
GUIDELINES:
1. High quality CD-R Audio discs (should conform to the standards of the Orange Book 2).
2. Use a high quality bit rate when recording discs. (At least 160kbps)
3. Record discs in the slowest speed possible. (i.e. 2x or 4x speed)
50˚10˚ 
						

							
 GENERAL FUNCTIONS AND CONTROLS                                           CD PLAYER
A. T OP UNIT CONTROLS (FIGURE 3)
1.  EJECT  FUNCTION  -  Pressing  this  will  eject 
the CD. The eject function will only when the unit 
is  in  cue  or  pause  mode,  this  is  to  prevent  acci-
dentally ejecting the disc when in play mode.
2.  FOLDER  BUTTON  - This  button  is  used  to 
toggle  between  folders  and  tracks.  Press  this 
button  to  show  the  folder  that  is  playing  in  the 
LCD. This button is really only for Mp3 discs.
3. SGL/CTN - This function allows you to choose 
between  single  track  play  or  continuous  track 
play (all tracks in order). This function also oper-
ates in FLIP-FLOP mode.
4.  TImE BUTTON  -  The  TIME  button  will  switch 
the  time  value  described  in  the  tImE  mEtEr 
between ELAPSED  PLAYING  TIME,  TRACK 
REMAINING  TIME,  and TOTAL  REMAINING 
TIME. 
5.  PITCH  SLIDER  -  This  slider  is  used  to  adjust 
the  playback  pitch  percentage.  The  slider  is  a 
set adjustment and will remain set until the pitch 
slider  is  moved  or  the  pitch  function  has  been 
turned off. This adjustment can be made with or 
without a disc in the drive. The pitch adjustment 
will remain even if a disc has been removed and 
will reflect on any other disc loaded into the play-
er.  That  is  to  say,  if  you  set  a  +2%  pitch  on  one 
disc, remove that disc and load another, that disc 
too  will  have  a  +2%  pitch.  The  amount  of  pitch 
being applied will be displayed in the lcd (21). 
6. PITCH ON/OFF BUTTON - This button is used 
to turn the pItcH  SlIdEr (5) function on and off. 
The  pitch  percentage  can  be  changed  between 
4%,  8%,  and  16%.  4%  will  allow  the  least 
amount of pitch manipulation and 16% will allow 
the most amount of pitch manipulation. To adjust 
to the different values please see page 22. 
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 9
Figure 3
1
10
2
16
17
18
19
20
21
12
11
9
8
7
6
5
43
13
14
15 
						

							
7.  PITCH  PERCENTAGE  SELECTOR  -  Press 
this  button  to  choose  any  pitch  range  percent-
ages of 4%, 8%, and 16%. See page 22 for more 
details.
8.  BOP  BUTTON  - During  play  mode,  pressing 
the  BOP  button  will  instantly  return  play  to  the 
last  set  cue  point  without  interruption  of  music. 
Use this function to create a stutter effect. 
9. (-)  PITCH  BEND BUTTON -  The (-)  pitch 
bend function creates a momentary “Slow Down” 
in  the  CD’s  BPM’s  (Beats  per  minute)  while  it  is 
playing.  This  will  allow  you  to  match  the  beats 
between two playing CD’s or other playing music 
source. Remember, this is a momentary function. 
When you remove your finger from the pitch but-
ton, the BPM’s will automatically return to pItcH 
SlIdEr'S  (5) pitch  value.  Holding  down  this 
button  will  give  a  maximum  of  -16%  pitch.  Use 
this  function  to  slow  to  another  playing  music 
source.  Be  sure  to  notice  that  this  function  is  a 
momentary pitch adjustment, for a more precise 
adjustment  use  the pItcH  SlIdEr  (5)  to  match 
the BPM’s with another playing music source.   
 (+)  PITCH  BEND  BUTTON  -  The (+)  pitch 
bend  function  creates  a  momentary  “BUMP”  in 
the  CD’s  BPM’s  (Beats  per  minute)  while  it  is 
playing.    This  will  allow  you  to  match  the  beats 
between  two  playing  CD’s  or  any  other  music 
source. Remember, this is a momentary function. 
When  you  remove  your  finger  from  this  button, 
the BPM’s will automatically return to the pItcH 
SlIdEr'S  (5) selected  pitch.  Holding  down  this 
button will give a maximum of +16% pitch. 
10.  RELOOP  BUTTON - If a SEAMLESS LOOP 
has been made (see setting a SEAMLESS LOOP  
on  page  20),  but  the  CD  Player  is  not  actively  in 
SEAMLESS  LOOP  mode  (a  loop  is  not  playing), 
pressing  the RELOOP  BUTTON will  instantly 
reactivate  the  SEAMLESS  LOOP  mode.  To  exit 
the  loop,  press  the out Button  (13).  LOOP 
and  RELOOP  will  appear  in  the lcd dISplay 
(21) when the RELOOP function is available.
11.    TEmPO  LOCK  FUNCTION  -  This  button 
activates  the  TEMPO  LOCK  function.  This  func-
tion  allows  you  to  use  the  PITCH  SLIDER  to 
speed up or slow down playback speed without 
altering  the  tonal  pitch  of  the  track.  When  this 
function  is  not  engaged  the  original  tonal  pitch 
of  the  track  will  be  altered  giving  you  the  "chip-
munk" effect when a track is played at a high rate 
of speed, or the "James Earl Jones" effect when 
a track is slowed to much.  
12.  JOG  WHEEL/EFFECTS  PLATTER  - This 
wheel has two functions;
A. The jog wheel will act as a frame search con-
 trol when the CD is in pause or cue mode, 
 allowing you to set a cue point. 
B. The wheel also works as a pitch bend during 
 playback. Turning the wheel clockwise will  
 increase the pitch percentage up to 100%,
 and turning the wheel in the counter-clock-  
 wise direction will decrease the pitch per-   
 centage down to -100%. The pitch bend will   
 be  determined on how long you turn the jog   
 wheel continuously.
13.  OUT  BUTTON -  This  button  is  used  to  set 
the  ending  point  of  a  loop.  A  loop  is  started  by 
pressing  the  In  button  (14), and  pressing  the 
OUT  BUTTON  to  set  the  loop  ending  point.  The 
loop will continue to play until the OUT BUTTON 
is pressed once again.
14.    SEAmLESS  LOOP  IN  BUTTON  - “CUE  ON 
THE  FLY”  - This  function  allows  you  to  set  a 
CUE  POINT  (see  CUE  POINT  page  19)  without 
music interruption (“on the fly”). This button also 
sets  the  starting  point  of  a  seamless  loop  (see 
SEAMLESS LOOP).
15.  PLAY/PAUSE  BUTTON  -  Each  press  of  the 
PLAY/PAUSE  BUTTon  causes  the  operation  to 
change from play to pause or from pause to play. 
While  in  play  mode  the  play  LED  will  glow,  and 
while in pause mode the play LED will flash.
16. SCRATCH BUTTON - This button is used to 
activate and deactivate the Scratch  effect. .
17. CUE - Pressing the cuE button during play-
back  immediately  pauses  playback  and  returns 
the  track  to  the  last  set  cue  point  (see  setting  a 
CUE  POINT,  page  19).  The  CUE  BUTTON  LED 
will  glow  when  the  unit  is  in  cue  mode  The  LED 
will  also  flash  every  time  a  new  CUE  POINT 
 GENERAL FUNCTIONS  AND CONTROLS (Cont.)                               CD PLAYER
©American Audio®   -   www.AmericanAudio.us   -   CK 1000Mp3 Instruction Manual Page 10