American Audio CD Player DCDPRO600 User Manual

DCD-PRO600
Professional Dual CD Player
 Operating Instructions
Featuring:
FLIPFLOP
DCD-PRO600
DCD-PRO600
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.comRevised 2/03 

©American Audio®   -   www.AmericanAudio.us   -   DCD-PRO600™ Instruction Manual Page 2
CAUTIONS  REGARDING  HANDLING.................................................................................................3
PRODUCT INFORMATION......................................................................................................................5
CUSTOMER SUPPORT .........................................................................................................................6...

NOTE:  This  product  satisfies  FCC  regulations 
when  shielded  cables  and  connectors  are 
used  to  connect  the  unit  to  other  equipment. 
To  prevent  electromagnetic  interference  with 
electrical  appliances  such  as  radios  and  tele-
visions,  use  shielded  cables  and  connectors 
for connections.
NOTE: This  CD  player  uses  a  semiconductor 
laser.    It  is  recommended  for  use  in  a  room  at 
the  following  temperature:  41˚F  -  95˚F  /  5˚C  - 
35˚C
WARNING:  TO  PREVENT...

ELECTRICAL PRECAUTIONS
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated "dangerous voltage" within theproduct's enclosure that may be of sufficient magnitudeto...

 PRODUCT INFORMATION
I.  Heat - The CD player should be situated away 
from  heat  sources  such  as  radiators,  heat  regis-
ters, stoves, or other appliances (including ampli-
fiers) that produce heat.
2.    Do  not  let  insecticides,  benzene,  or  thinner 
come in contact with the surface of the unit.
3.  Never disassemble or modify your unit in any 
way,  doing  so  will  void  your  manufactures  war-
ranty.
4.  Never plug this unit in to a dimmer pack
5.  Do not attempt to operate this unit if...

 SET-UP
©American Audio®   -   www.AmericanAudio.us   -   DCD-PRO600™ Instruction Manual Page 6
 CUSTOMER SUPPORT
Customer Support:  American Audio® provides a toll free customer support line, to provide set up help and  
to answer any question should you encounter problems during your set up or initial operation. You may also visit 
us  on  the  web  at  www.AmericanAudio.us  for  any  comments  or  suggestions. For  service  related  issue  please 
contact  American  Audio®.  Service  Hours  are...

•  8 times over sampling 1 bit D/A converter   •  Filter Effect
•  20 Seconds Digital Anti-Shock Protection   •  2 Coast Effect
•  4 Programmable Cue Points or Samples     •  Auto cue Function (Sensitive to -48dB)
•  Reverse Playback (Unlimited)       •  Real-time Cue (“Cue on the Fly”)
•  Selectable Time Display         •  4 different speed scan
•  S/PDIF Digital Audio RCA Coaxial Output    •  30 Programmable Tracks
•  Fader “Q” Start Control (a)       •  Bop Effect (b)
•  Flip-Flop (Relay Playback) (c)...

13
 GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT
©American Audio®   -   www.AmericanAudio.us   -   DCD-PRO600™ Instruction Manual Page 8
A. REMOTE CONTROL - FACE (FIGURE 3)
1.  FILTER/COAST/ADJUST  -  This  button  allow 
you to change the FILTER and Coast values. With 
the FILTER/COAST/ADJUST button selected (on) 
the  FILTER  value  is  one  second  and  the  COAST 
value  is  five  seconds.  With  the  FILTER/COAST/
ADJUST deselected (off) the FILTER value is a 1/
2 second and the COAST value is three...

to the beginning of the disc. When the REV/PLAY 
effect  is  selected  a  number  3  will  appear  in  the 
LCD  (14),  indicating  REV/PLAY  is  active.  See 
reverse play on page 24.
5.  TIME  - The  TIME  button  is  used  to  changed 
the displayed time values. Time can be displayed 
as elapsed track time, remaining track time, and 
total disc remaining time.
6.  CUE BUTTONS  -  These  button  are  used  to 
store  four  user  programmable  “Cue  Points.”  A 
“Cue  Point”  is  a  starting  point...

15. (-) PITCH BEND - The (-) pitch bend function 
creates  a  momentary  “Slow  Down”  in  the  CD’s 
pitch  speed  (Beats  per  minute  -  BPM)  when 
the PITCH (7)  function  is  activated.  This  func-
tions  allows  the  beats  between  two  CD’s  or  any 
other  music  source  to  match.  This  is  a  momen-
tary  function.  When  the  button  is  depressed  the 
pitch  speed  will  automatically  return  to  PITCH 
SLIDER'S (23) selected pitch. Holding down this 
button  will  give  a  maximum...