American Audio CD Player DCD PRO 250 User Manual

American DJ® AUDIO • DCD-PRO250™ INSTRUCTIONS MANUAL • PAGE 11
    CAUTION:
      •   Do not place any foreign objects in the disc tray, and do not place more than one disc in the disc tray 
           at a time. Doing so may result in malfunction.
      •   Do not push the disc tray in manually when the power is off, as this may result in malfunction and 
           damage the player.
3.  Selecting Tracks
      •    Press the SKIP Buttons once to move to one higher or lower track.
      •    Hold the...

    1) The player has completed the cue or pause operation and is waiting for the play start command.
      2)  When the  PLAY/PAUSE  button is pressed, playback starts and the cue point is stored in the 
           memory.
      3)  Playing
      4)  The pause mode is set when the  PLAY/PAUSE button is pressed again.
      5)  Pausing
      6)  Playback resumes when the  PLAY/PAUSE button is pressed again. The new cue point is stored
           in the memory.
      7)  Playing
Figure 12
American DJ®...

American DJ® AUDIO • DCD-PRO250™ INSTRUCTIONS MANUAL • PAGE 13
      1) The player has completed the cue or pause operation and is waiting for the play start command.
       2) When the  PLAY/PAUSE  button is pressed, playback starts and the cue point is stored in the memory.
       3) Playing
       4) The pause mode is set when the  PLAY/PAUSE button is pressed again.
       5) Pausing
       6) When the  PLAY/PAUSE  button is pressed again, playback resumes and the new cue point is stored...

13.  Editing A Loop:
    •Note: You can only edit the ending point of the loop. 
     •Before you can edit a seamless loop you obviously, must first be in SEAMLESS LOOP mode.
     •If a SEAMLESS LOOP has not yet been created, follow instructions above (SEAMLESS LOOP PLAY) to create a 
       SEAMLESS LOOP. If a SEAMLESS LOOP has already been created, press the  RELOOP BUTTON to reenter the 
       SEAMLESS LOOP mode (Fig. 17).
        1) Press the  OUT/LOOP BUTTON  to return to normal play from the loops...

15. PITCH BENDING
    •  This function momentarily increases or decreases the playback speed of a CD respectively when the   
        + PITCH BEND  or - PITCH BEND  button is pressed. The extent to which the speed changes is 
        proportionate to the amount of time the button is pressed. For example, if the  + PITCH BEND BUTTON  
        is held down continuously, the CD’s speed increases and will continue to increase until reaches a 
        maximum of 16% gain in speed.  When you release the  +...

 MATCHING THE BEATS PER MINUTE (BPM)
Fig. 15
Matching the Beats Per Minute (BPM) 
 
This function allows you to match the beat of two separate music sources.
    •  With the unit, there are two ways to adjust the playing speed and match the BPMs of the two CDs:
     •  Use the pitch slider to adjust the BPM statically.
     •  Use the PITCH BEND buttons to change the BPM temporarily.   
      1)  Pitch Slider - To adjust the BPM by sliding the pitch slider up or down, press the PITCH button to...

Precautions on handling compact discs   
    • Do not allow fingerprints, oil or dust to get on the surface of the disc.  If the disc is dirty, wipe it off with a 
       soft dry cloth.   
     • Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths 
       to clean discs.      
     • Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its 
       case or returning it.   
     • Do not bend the...

American DJ Supply® World Headquarters:
4295 Charter Street
Los Angeles, CA 90058 USA
Tel: 323-582-2650 - Fax: 323-582-2610
Web: www.americandj.com - E-mail: [email protected]