American Audio CD Player CDS1 User Manual
Have a look at the manual American Audio CD Player CDS1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 120 American Audio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
American Audio® • CDS-1™ INSTRUCTION MANUAL • PAGE 21 To FLIP-FLOP entire CDs: To FLIP-FLOP an entire disc, be sure both drives are in continuous play mode. The SINGLE ICON (39) should not be displayed in the LCD (3). When both drives are in continuous play mode, follow the directions for single track FLIP-FLOP as detailed above. When one the disc in one unit ends the other unit will immediately begin playback. Combining FLIP-FLOP modes: Flip-Flop modes may combined. One unit may run in single mode and the other in continuous mode. When the units are arranged in this fashion, the unit in single mode will play a single track and flip to the next unit. The next unit will then play the entire disc and flip back to the other. The other will then play the next track and flip back to the other unit, and so on. Fader Q-Start™ This function works in conjunction with a compatible American Audio “Q-Start" DJ mixer. When used with a compatible CD player, you can use the crossfader to start and stop the CD Player with the slide of the fader. Connecting your CDS-1 to a Fader “Q” Start mixer for “Flip Flop” control: Be sure to connect 1/8” mini plugs from the control connection on the rear your CDS-1 to the 1/8” control jack on the rear of American DJ or American Audio “Q” series mixer. That’s it, you’ll be set for FLIP FLOP! ADVANCED OPERATIONS FLIP-FLOP™ This feature is kind of “auto pilot." “Flip-Flop” mode can only function with the use of two CDS-1 units. The “Flip-Flop” function may be used with or without an American Audio “Q” deck mixer, you can have one unit begin playback when the other ends. You can “Flip Flop” single tracks, the entire disc, a combination of the two, or you can even “Flip-Flop” your programmed tracks. To FLIP-FLOP single tracks or programmed tracks: 1) Connect your system as described in the set up section on page 6. 2) Set your mixer’s crossfader to the center position. 3) Be sure your two units are single mode. SINGLE (39) should be indicated in the LCD (3). 4) Load your two CDS-1 with audio disc. 5) After they have both cued, press the PLAY/PAUSE BUTTON (8) on one of your drive to begin playback. 6) After the first unit’s single track has ended the second unit’s track will immediately begin play- back. 7) FLIP FLOP will continue until you stop it or power is interrupted.
1-YEAR LIMITED WARRANTY A. American Audio ® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the American Audio ® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American Audio ® will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No acces - sories should be shipped with the product. If any accessories are shipped with the product, American Audio® shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American Audio ® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American Audio ® factory unless prior written authorization was issued to purchaser by American Audio ®; if the product is damaged because not properly maintained as set forth in the instruction manual. D. This is not a service contract, and this warranty does not include maintenance, cleaning or peri - odic check-up. During the period specified above, American Audio ® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American Audio ® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American Audio ®. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. E. American Audio ® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup- plied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American Audio ® in connection with this product, including warranties of mer- chantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American Audio ® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. G. This warranty is the only written warranty applicable to American Audio ® Products and supersedes all prior warranties and written descriptions of warranty terms and conditions her etofore published. WARRANTY ©American Audio® - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 22
SPECIFICATIONS American Audio® • CDS-1™ INSTRUCTION MANUAL • PAGE 23 GENERAL Model: American Audio® CDS-1™ - Professional Compact Disc Player System: Single, Top Loading, Digital Compact Disc Audio Player. Disc type: Standard compact discs (5 in / 12cm and 3in/8cm discs) Dimensions: 3 1/4” ~ 4 1/2” H x 8 1/2” W x 10 3/8” L Installation: Place on flat surface or mount in flat case Weight: 3.5 Lbs. / 1.6 kgs Power supply: AC 115v/230v, 50/60Hz Power consumption: 15W Pitch control range: +/-8%, +/-12%, +/-16% Pitch bend: +/-16% Pitch accuracy: +/- 0.1% Environmental conditions: Operational temperature: 5 to 35˚C (41 to 95˚F) Operational humidity: 25 to 85% RH (non-condensation) Storage temperature: -20 to 60˚C (4 to 140˚F) Accessories: Dual RCA Cable (for left and right channels) Control 1/8” miniplug type (3 feet) AUDIO SECTION Quantization: 16 bit linear per channel Sampling rate: 44.1 kHz at normal pitch Over sampling rate: 8 times over sampling 1 bit D/A converter D/A conversion 16 bit Frequency response: +/- 1 dB 20 Hz to 20,000 KHz Output level: 2.0V +/- 1dB Load impedance: 47k ohm or more AUDIO CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47Kohm) ITEM NOMINAL LIMIT CONDITION Output level 2.0Vrms+/-1dB 2.0V+/-1dB 1KHz,0dB Channel balance 0.5dB 1.0dB 1KHz,0dB Frequency response +/-0.5dB +/-1.0dB 20Hz-20KHz,0dB De-emphasis response +/-2.5dB +/-3dB 16KHz, -20dB Channel separation* 82dB 75dB 1KHz,0dB T.H.D. + NOISE* 0.02% 0.025% 1KHz,0dB S/N ratio (IHF-A)* 84dB 75dB 1KHz.0dB NOTE: *With 20KHz low pass filter. SEARCHING TIME (TEST DISC: TCD-792) ITEM NOMINAL LIMITS CONDITION Short access time 1.7 sec 4 sec Play next track Long access time 3 sec 6 sec Track 1 ->Track 20 / Track 20 ->Track 1 CD recover time 1 sec 2 sec CD play interrupted by mechanical shock PLAYABILITY ITEM NOMINAL LIMIT CONDITION Interruption 1000um 700um TCD-725 Black dot 1000um 600um TCD-725 Finger prints 75um 65um TCD-725 Eccentricity 210um 140um TCD-712,713 NO TRACK JUMP Vertical deviation 1mm 0.54mm TCD-731R PICK-UP System Object lens drive system optical pick-up Object lens drive system 2 dimensional parallel drive Tracking detection 3 spot beam detection Optical source Semiconductor laser Wave length 780nm NOTES: The specifications are subject to change to any improvement by negotiations in advance. The parts are subject to change to any improvement within the range of the specifications.
©American Audio A Division of the American DJ Group of Companies American Audio World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.AmericanAudio.us E-mail: