American Audio Amplifier XSPA Series User Manual

©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series   -   Instruction Manual Page 11
XSP-A Series                                        Controls and Features
Rear of XSP-12A   
1.  MIC  XlR  InPUt  - Plug  a  mic  directly  into  this  port  for  public  address  usage  and  let  your 
voice be heard. (No phantom power)
2.  MICRoPHone  InPUt  VolUMe  –  This  knob  is  used  to  increase  or  decrease  the  volume 
ouput on your XSP-12A.  
3. 1/4” MIC InPUt – Plug a mic directly into this...

©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series   -   Instruction Manual Page 12
XSP-A Series                                        Controls and Features
 increase the amount of treble applied to a channel signal.
     9.  1/4” lIne oUtPUt – This is used to send the incoming line level signal from either of the  
 Line Level Inputs Jacks to another XSP-12A or other powered speaker. 
     10. XlR lIne oUtPUt – Using a XLR cable, use this port to daisy chain from your XSP-12A to  
 another...

©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series   -   Instruction Manual Page 13
XSP-A Series                                        Controls and Features
Rear of XSP-15A   
1.  MIC  1  XlR  InPUt  - Plug  a  mic  directly  into  this  port  for  public  address  usage  and  let  your 
voice be heard. (No phantom power)
2. 1/4” MIC 1 InPUt – Plug a mic directly into this port. 
3.  MICRoPHone  1  InPUt  VolUMe  –  This  knob  is  used  to  increase  or  decrease  the  volume 
ouput on your...

 decrease is -12db. Turning the knob in a counter-clockwise direction will decrease the   
 amount of treble applied to a channel signal, turning the knob in a clockwise direction will  
 increase the amount of treble applied to a channel signal.
     12. 1/4” lIne oUtPUt JACk – This jack is used to send the incoming line level signal from  
 either of the Line Level Inputs Jacks to another XSP-15A or other powered speaker. 
     13. XlR lIne oUtPUt – Using a XLR cable, use this port to daisy chain from...

©American Audio®   -   www.AmericanAudio.us   - XSP-A Series   -   Instruction Manual Page 15
XSP-A Series                                      typical Speaker Set-Up
typical XSP-A Series output Set-Up
XSP-10AXSP-10A
AUX4
AUX/IN
MADEINCHINA
MODELNO.:Q-3433MKIIPOWERSOURCE:115/230V~50/60Hz20W
MINMAXTRIMOUTPUT
XLR-XLR balanced Cables
Connections are the same for 12A & 15A 
Speakers 

MASTERTHROUGH
MASTERTHROUGH

©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series   -   Instruction Manual Page 16
XSP-A Series                                             looping Speakers
To Next XSP-A Speaker (If Applicable)
From Mixer
XSP Speaker looping 

©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series   -   Instruction Manual Page 17
XSP-A Series                                        Rigging and Mounting  options
Speaker  Rigging  Hardware  – The  XSP-A  Series  speakers  may  be  permanently  installed  or 
mounted  using  any  of  the  many  available  third  party  wall  brackets  and  ceiling  mounts  available. 
Always  be  sure  to  follow  all  safety  instructions  and  guidelines  included  with  the  mounting  hardware 
for safe...

Floor  Monitor brackets  - These  brackets  are  help-
ful  for  DJ’s  and  bands  to  help  moniter  their  sound 
during  a  performance.  This  is  also  an  alternative  to 
standing  the  speaker  straight  up  or  mounting  it  on 
a  stand.  These  brackets  slide  into  each  end  of  the 
speaker. Each speaker has its own special sized floor 
bracket.
XSP-A Series                                         Rigging and Mounting  options
©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series...

©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series   -   Instruction Manual Page 19
XSP-A Series                                         Available Accessories
APX-b - Speaker Carry Case - A rugged gig bag with 
rollers, an adjustable pull out handle, and a heavy duty 
zipper. Designed to protect your speaker from damage 
and  the  environment  during  transportation  and  stor-
age.
Z-APX/b  7  Z-APX/H  -  Speaker  Rigging  Hardware 
- American  Audio®  carries  an  assortment  of  rigging...

©American Audio®   -   www.AmericanAudio.us   -  XSP-A Series   -   Instruction Manual Page 20
1-yeAR lIMIted WARRAnty
A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be    
 free of manufacturing defects in material and workmanship for a period of \
1 Year (365 days) from   
 the date of purchase. This warranty shall be valid only if the product is purchased within the    
 United States of America, including possessions and territories. It is t\
he owner’s...