American Audio Amplifier XLT Series User Manual
Here you can view all the pages of manual American Audio Amplifier XLT Series User Manual. The American Audio manuals for Amplifier are available online for free. You can easily download all the documents as PDF.
Page 11
©American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 11 OPERATING MODES: Always configure your amplifier operating mode before beginning operation. If you want to change it dur- ing performance. You must decrease the gain controls to their lowest levels to protect the speakers from any popping noise. Stereo Operation - Page 15/Figure 14 details an example of a typical stereo set-up. Connect your inputs into channels one and two of the amplifier....
Page 12
©American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 12 PROTECTION: Thermal Protection - If the amplifiers operating temperature runs over 105°C (221°F) the amplifier will go into thermal protection to prevent damage from over heating. The Protect Indicator LED located on the front of the amp will light up, and the output signal will be muted. The fans will start to run at max speed to allow the amp to return to a safe operating temperature. To...
Page 13
©American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 13 8-Ohm Loads: The amplifier can operate at practically any power level without risk of overheating. However, if it is pushed hard enough to continually light the “CLIP” indicator, the amplifier’s average output power can reach 150 watts. 4-Ohm Loads: If the “CLIP” indicator flashes occasionally, the amplifier is approaching its maximum long-term power capacity. If it is lit about half the...
Page 14
©American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 14 TYPICAL MONO BRIDGE SET-UP SPEAKERS 8 OHM MINIMUM TYPICAL STEREO OUTPUT CONNECTIONS SPEAKERS 4 OHM MINIMUM SPEAKERS 4 OHM MINIMUM Use Channel 1 Inputs Only (XLR or 1/4” Jacks) X Use Speakon Connections Use the two positive binding post termainals (red) for speaker output. Figure 15 Figure 14 Set the Operation Mode switch to Bridge
Page 15
©American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 15 TYPICAL PARALLEL SET-UP SPEAKERS 4 OHM MINIMUM SPEAKERS 4 OHM MINIMUM Figure 15 Use Channel 1 Inputs Only (XLR or 1/4” Jacks) Set the Operation Mode switch to Parallel
Page 16
American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 16 The XLT Series carries a one year limited warranty. We recommend you fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a R.A. (return authorization) number. If the mixer is under warranty, you must provide a proof of purchase invoice. You may obtain a R.A. number by contacting our...
Page 17
XLT Series SPECS Power supply: AC 100V, 50/60Hz (Japan) AC 110V, 60Hz (Colombia) AC 120V, 60Hz (U.S.A. and Canada) AC 127V, 60Hz (Mexico) AC 220V, 50Hz (Chile and Argentina) AC 220V, 60Hz (Philippines and Korea) AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore) AC 240V, 50Hz (Australia and U.K.) MODEL: XLT 900 (Class AB) XLT 1200 (Class AB)...
Page 18
XLT Series SPECS Power supply: AC 100V, 50/60Hz (Japan) AC 110V, 60Hz (Colombia) AC 120V, 60Hz (U.S.A. and Canada) AC 127V, 60Hz (Mexico) AC 220V, 50Hz (Chile and Argentina) AC 220V, 60Hz (Philippines and Korea) AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore) AC 240V, 50Hz (Australia and U.K.) MODEL: XLT 2000 (Class H) XLT 2500 (Class H)...
Page 19
American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 19 Notes
Page 20
©American Audio® World Headquarters: 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-3322 Fax: 323-725-6100 Web: www.AmericanAudio.us E-mail: [email protected] American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands [email protected] / www.americandj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99