Amcrest IP3M-941 Dual Band PT Camera User Manual

							11 
 
3 Connection & Installation 
This section provides information about the connection and installation of the Amcrest ProHD network camera. 
3. 1  Connectio n  Gui de 
The camera initially should be connected via the following method: 
 
In addition to connecting the camera to a computer, the camera should also be connected to a power source, by 
connecting the included power cable to both a power outlet, and the camera. 
3. 2  Installatio n  Gui de 
The camera has a standard camera tripod screw hole (1/4-20 UNC thread) for use in mounting the camera onto a 
stable surface.  
Note: Prior to installation ensure that the installation environment can support at least 3 times the weight of the 
camera.   
						

							12 
 
4 Camera Access Setup 
This section of the guide will provide the user with information on how to setup access to the camera through any 
of the following methods. 
4. 1 D efa ult U se rna me a nd  Pas sw ord 
To login to the system for the first time, use one of the following default username/password combinations. Once 
you’ve successfully logged in, it is highly recommended to change the password for security reasons. 
Username: admin  
Password: admin 
Note: Logging in for the first time will prompt the user to change the password to the admin account. 
   
						

							13 
 
4. 2 Ca me ra  setup  me thods 
To make your experience with the Amcrest WiFi camera easy and simple, weve provided multiple ways to set up, 
view, and operate your camera depending on your needs. Please follow the instructions on this page to set up your 
camera in the way that works best for you. 
4.2.1 Setting up your camera for the first time 
If setting up your camera for the first time, please follow the instructions as outlined in section 4.3.1. Using the 
Amcrest View app on your smartphone or tablet, you can view your camera live from anywhere, and access 
features such as pan/tilt/zoom, recording, taking snapshots, two-way audio, and more. 
4.2.2 Accessing your camera using multiple mobile devices 
If you followed the app setup instructions in section 4.3.1 to initially set up your camera and would like to add the 
camera to another smartphone or tablet, follow the instructions as outlined on section 4.3.4 using your other 
devices. 
4.2.3 Configuring advanced settings on your camera 
If you would like to configure your camera to enable advanced features such as motion detection, e-mail alerts, 
FTP, image adjustments, scheduling, and more, please follow the instructions as outlined on section 4.4 (Desktop 
access setup). 
4.2.4 Using Amcrest Cloud for remote viewing, storage, and playback 
Amcrest Cloud is our optional cloud storage and playback service which allows you to access recorded footage 
from any device. We offer 4 hours of free storage for your first camera. Please follow the instructions as outlined 
on section 4.5 (Amcrest Cloud setup) to sign up for our Amcrest Cloud service and get 4 hours of free storage. 
4.2.5 Using plug-and-play for remote web access 
AmcrestView.com is a web portal that allows you to view your cameras and recordings quickly and easily from 
anywhere in the world using a web browser. Use AmcrestView.com if you need to simply check-in at a moments 
notice. If you would like to use AmcrestView.com, please follow the instructions outlined on section 4.7 (Remote 
web access setup). 
 
   
						

							14 
 
4. 3 A mcres t Vi e w A pp S etup 
Amcrest IP3M-941 cameras enable access through the use of the Amcrest View app on either iOS or Android 
mobile operating systems. There are two versions of the app, Amcrest View Lite, and Amcrest View Pro. Amcrest 
View (Lite or Pro) on the App Store or Play Store. The Pro version contains features such as push notifications, 
sharing video and image files, exporting video in MP4 format, and exporting image files to your phone. The 
Amcrest Pro version of the app is now free to download from the Play Store and App Store. 
For purposes of this guide, we will use iOS, though both apps have the same interface. The App Interface may 
differ slightly from the screenshots below as updates are released. Below, youll find instructions on how to set up 
your camera, as well as instructions on how to configure different settings on your camera such as motion 
detection and email alerts. Every major app setup method will be covered in the following sections.   
4.3.1 WiFi Configuration setup 
Plug in your camera and follow the steps below to get your camera up and running. Please wait 30 seconds after 
plugging in the camera to allow it to initialize. The LED on the back will blink green when ready. 
1. Download and open the Amcrest View Pro app from the App Store or Play Store.  
 
 
 
 
 
Note: After installing the app, and before starting the app setup process, 
please make sure your phone is connected to the WiFi network you will be 
connecting your camera to. 
 
2. From the home screen, tap the icon in the top-right corner to open the 
Device List.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							15 
 
 
 
 
  
3. Tap the Add Device button. 4. Tap WiFi Camera. 
 
  
 
 
 
 
Note: Move the 
camera or the 
phone to ensure 
that the entire QR 
code is visible and 
focused in the 
frame. In case the 
QR code cannot be 
scanned, please 
tap Enter S/N 
Manually to enter 
in the camera’s 
serial number. 
5. Tap WiFi Configuration Setup. 6. Scan the QR code from the sticker on your 
camera.  
  
						

							16 
 
 
 
 
 
 
 
 
 
 
Note: The default 
username is 
admin and the 
default password 
is admin. 
7. Double check to ensure that your S/N (Serial 
Number) is entered correctly, then tap Next. 
8. Give your camera a name, then enter in the 
camera’s username and password. Once 
you’ve filled out all of the fields, tap Next. 
 
 
 
 
 
 
Note: Most 
Amcrest cameras 
can only connect to 
2.4 GHz WiFi 
networks, so please 
ensure that your 
phone is connected 
to a compatible 
network. 
Otherwise, perform 
the Ethernet WiFi 
Setup method in 
section 4.3.2. 
 
9. Enter your WiFi password, then tap Next.  10. Your camera is almost ready. Tap the Start 
Live Preview button to proceed with 
changing your password. 
 
  
						

							17 
 
 
 
 
 
 
 
 
Note: Once the 
password is 
changed here, it 
will take effect 
immediately. If 
you forget your 
password, you can 
always hard reset 
the camera using 
the steps detailed 
in the FAQs 
section of this 
guide. 
 
 
 
 
 
 
 
Note: To connect 
your camera to 
additional 
smartphones and 
tablets, please use 
the P2P Setup 
method as outlined 
on section 4.3.4. 
 
11. To ensure the security of your camera, you 
will be asked to change the password for your 
camera’s default username (admin). Please 
select a password that is at least 8 characters 
long and one that uses a combination of 
uppercase letters, lowercase letters, and 
numbers. Then, tap Change Password. 
12. Your camera is now ready to go! Tap the Start 
Live Preview button to get started! 
 
 
Still not working? 
If you have a dual band router, and your camera does not connect to your WiFi network after following the WiFi 
Configuration method below, please use the Ethernet WiFi Setup method as detailed in section 4.3.2. 
 
Tip: To better understand the Apps interface and features, please visit the Help Center within the app. To access 
the Help Center, tap the menu icon on the top left hand side, tap Help, then select which screen youd like more 
information about. For additional assistance, please contact us at www.amcrest.com or give us a call at 1-888-212-
7538. Step by step video tutorials available at www.amcrest.com/videos 
 
 
 
 
 
 
 
 
 
  
						

							18 
 
 
4.3.2 Ethernet WiFi Setup 
The Ethernet WiFi Setup process is a useful and stable setup method that uses a temporary Ethernet (hardwired) 
connection to your camera. By the end of the process, your camera will be working on WiFi and will not need a 
cable. 
If the WiFi Configuration setup method (see section 4.3.1 WiFi Configuration setup) does not work, this is a great 
“backup” method. Alternatively, this method can also be used as an initial setup method, if preferred. It will take a 
few more steps but still ends with your camera being added to WiFi for wireless use.  
Plug in your camera and follow the steps below to get your camera up and running. Please wait 30 seconds after 
plugging in the camera to allow it to initialize. 
1. Download and open the Amcrest View Pro app from the App Store or Play Store. 
 
 
 
  
2. From the home screen, tap the icon in the top-
right corner to open the Device List.  
3. Tap the Add Device button.  
 
 
 
 
  
						

							19 
 
  
4. Tap WiFi Camera.  5. Tap Ethernet WiFi Setup. 
  6. Plug your camera into your router via an Ethernet 
cable. Don’t worry, once the camera is set up, the 
camera can be unplugged and moved to a 
different location. Tap Next when finished.  
7. Ensure your mobile phone is connected to the 
WiFi network that you will be connecting your 
camera to, then tap Next. 
 
  
						

							20 
 
 
 
 
 
Note: Move the 
camera or the 
phone to ensure 
that the entire QR 
code is visible and 
focused in the 
frame. In case the 
QR code cannot 
be scanned, 
please tap Enter 
S/N Manually to 
enter in the 
camera’s serial 
number. 
 
8. Scan the QR code [QR code icon] from the sticker 
on your camera.  
9. Double check to ensure that your S/N (Serial 
Number) is entered correctly. Then, tap Next. 
 
 
 
 
 
 
 
 
Note: The default 
username is admin 
and the default 
password is admin. 
 
10. Give your camera a name, then enter in the 
camera’s username and password. Once you’ve 
filled out all of the fields, tap Next. 
11. Pick a WiFi network, enter in the password, and 
tap Next.