Aluratek UNDER TABLE AV INTERCONNECT UNITED KINGDOM UT240451 User Guide

							Under the Table Interconnect Solutions
Under the Table Interconnect Solutions Under the Table Interconnect Solutions
Under the Table Interconnect Solutions 
  
 User’s Guide 
  
 
400-0491-004 
 
         
1 
Installation Options 
Inside Desk (Side View)
Table Top (Side View)
Back of Desk/Podium (Top View)
Desk Surface
 
 
Welcome! 
We greatly appreciate your purchase of a UT Series. We are sure you will find 
it reliable and simple to use. Superior performance f or the right price, backed 
by solid technical and customer support is what ALTINE X has to offer. 
We are committed to providing our customers with  
Signal Management Solutions
® to the most demanding audiovisual 
installations at very competitive pricing and we welc ome you to join the ranks 
of our many satisfied customers throughout the world. 
1. Precautions and Safety Warnings 
Please read this manual carefully before using your UT- Series Interconnect. 
Keep this manual handy for future reference. These s afety instructions are to 
ensure the long life of your UT-Series Interconnect an d to prevent fire and 
shock hazards. Please read them carefully and heed al l warnings. 
1.1 General  · 
There are no user serviceable parts inside. Qualified A LTINEX service 
personnel must perform all service on the UT-Series. 
1.2 Handling ·  
To prevent fire or shock, do not expose this unit to w ater or moisture. 
Do not place the UT-Series in direct sunlight, near he aters, or 
heat-radiating appliances, or near any liquid. Exposu re to direct sunlight, 
smoke, or steam can harm internal components. 
·  Handle the unit carefully. Dropping or jarring can  cause damage. 
· Do not pull any cables that are attached to the UT-Se ries. 
· Do not place heavy objects on top of the UT-Series. 
1.3 Cleaning  · 
Unplug the UT-Series before cleaning. 
· Clean only with a dry cloth. Never use strong deterge nts or solvents such 
as alcohol or thinner. Do not use a wet cloth or wate r to clean the unit. 
Do not open the unit to clean. 
1.4 FCC Notice  ·  
This device complies with Part 15 of the FCC Rules. O peration is subject 
to the following two conditions: (1) This device may  not cause harmful 
interference, and (2) this device must accept any in terference received, 
including interference that may cause undesired oper ation. 
· This equipment has been tested and found to comply wit h the limits for 
a Class A digital device, pursuant to Part 15 of the  FCC Rules. These 
limits are designed to provide reasonable protection a gainst harmful 
interference when the equipment is operated in a co mmercial 
environment. This equipment generates, uses, and can ra diate radio 
frequency energy and if not installed and used in acc ordance with 
instructions found herein, may cause harmful interfe rence to radio 
communications. Operation of this equipment in a re sidential area is 
likely to cause harmful interference in which case t he user will be 
required to correct the interference at his own expe nse. 
· Any changes or modifications to the unit not expressly  approved by 
ALTINEX, Inc. could void the user’s authority to op erate the equipment. 
 
 
2. Installation Procedures 
The UT Series can be installed horizontally or vertica lly as shown. Typically, units are installed under a table-top, but in 
some cases, it may be desirable to install a unit inside  a desk opening, or on the back of a desk or podium. 
Step 1.  Locate the best position for the UT Interconne ct, but do NOT mount it to the surface until all the cables are 
prepared. 
Step 2.  Prepare the mating cables using high-quality  cables for best results and durability. Make sure the cables are long 
enough to allow for a service-loop and so the cables c an be neatly routed beneath the table to their destinations. 
Step 3.  Prepare the network cables using the CAT-6 (R J-45) connectors provided with the unit.* The connectors are 
high-quality snap-in connectors and do not require a ny tools for installing them into the UT interconnect.  
           
Step 4.  Secure the unit under the table using the me tal screws provided with the unit. 
Step 5.  Make any necessary connections to the snap-in c onnectors.  
Step 6.  Use cable-ties to secure the cables to the moun ting shelf. Insert the ties through the holes on the bottom of the 
unit. 
Step 7.  Use the cable clamps provided to secure the c ables to the bottom of the table/desk.  
* Please visit our website: 
www.altinex.com for information related to the pin out of the cabl es. 
 
3. Limited Warranty/Return policies 
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies. 
Note:  Connectors are provided but do not include cables.  ALTINEX 
recommends a telecommunications contractor wire the  network 
connectors and verify operation before installing t he UT 
interconnect.    
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
2 
4. Technical Specifications 
Specifications are subject to change. See www.altinex.com for up-to-date information. 
 
Features/Description  UT-Series 
Pass-Through   
Connection Type (front to back) 
  AC Power   NEMA Receptacle to plug 
8 ft (2 m) cord  
  Stereo Audio  3.5 mm F-F 
8 in (200 mm) cable  
  Network (CAT-6)  Snap-in RJ-45 connector, 
 no cable  
  Video, Analog   15-pin HD bulkhead, F-F 
  Video, Digital   24-pin DVI bulkhead, F-F 
Models (Options) 
 UT240-311 (U.S.)  CAT-6 (RJ-45) female  (4)  
AC receptacle   (2) 
 UT240-313 (U.S.) 15-pin HD female  (2)  
24-pin DVI female  (2)  
3.5mm stereo  (2)  
CAT-6 (RJ-45) female  (4) 
AC receptacle   (2) 
 UT240-310 (U.S.)  
 UT240-411 (EUR)  
 UT240-451 (ENG) 
 UT240-511 (AUS)  
 UT240-551 (UNIV) 15-pin HD female  (2) 
CAT-6 (RJ-45) female  (4)  
3.5mm stereo  (2) 
AC receptacle   (2) 
 UT240-312 (U.S.)  
 UT240-410 (EUR)  
 UT240-450 (ENG)  
 UT240-510 (AUS) 
 UT240-550 (UNIV) 
CAT-6 (RJ-45) female  (4)  
AC receptacle   (4)  
15A Circuit Breaker  (1) 
Accessories Included   
  Hardware  Mounting screws 
Table 1. UT240 Series General  
Mechanical  UT-Series 
Dimensions  See the Application Diagrams. 
Net Weights  
 
   UT240-310  3.0 lb (1.4 kg) 
   UT240-311  2.4 lb (1.1 kg) 
   UT240-312  2.9 lb (1.3 kg) 
   UT240-313  3.0 lb (1.4 kg) 
   UT240-410  3.2 lb (1.5 kg) 
   UT240-411  3.0 lb (1.4 kg) 
   UT240-450  3.0 lb (1.4 kg) 
   UT240-451  3.0 lb (1.4 kg) 
   UT240-510  3.2 lb (1.5 kg) 
   UT240-511  3.0 lb (1.4 kg) 
   UT240-550  3.2 lb (1.5 kg) 
   UT240-551  3.0 lb (1.4 kg) 
Shipping Weights    
   UT240-310  3.4 lb (1.5 kg) 
   UT240-311  2.8 lb (1.3 kg) 
   UT240-312  3.3 lb (1.5 kg) 
   UT240-313  3.4 lb (1.5 kg) 
   UT240-410  3.6 lb (1.6 kg) 
   UT240-411  3.4 lb (1.5 kg) 
   UT240-450  3.4 lb (1.5 kg) 
   UT240-451  3.4 lb (1.5 kg) 
   UT240-510  3.6 lb (1.6 kg) 
   UT240-511  3.4 lb (1.5 kg) 
   UT240-550  3.6 lb (1.6 kg) 
   UT240-551  3.4 lb (1.5 kg) 
T° Operating  10 °C-35 °C 
T ° Maximum  50°C 
Humidity 
90% non-condensing 
Table 2. UT240 Series Mechanical   
Electrical  TM-Series 
Pass-Through Signals  All standard audio, video, network, 
and modem signals are acceptable. 
Pass-Through AC  600W max. 
Table 3. UT240 Series Electrical   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
3 
 UT240-313 shown here. 
5. About Your UT Interconnect 
The ALTINEX UT-Series of Under-the-Table AV Interconnects provide a wide variety of options for routing computer audiovisual signals, network connections, 
and AC power. Under-the-table options are ideal for  situations where it is too expensive or impractical to install the routing interface directly into the furniture. 
UT-Series are available in both U.S. and internationa l versions. U.S. versions provide standard NEMA 5-15R  receptacles; international units include AC 
receptacles for Europe, England, and Australia.  Addi tionally, the UT240-550 and UT240-551 include univers al AC receptacles that accept various types of AC 
plugs.  
U.S. and international models UT240-312, UT240-410, UT24 0-450, UT240-510, and UT240-550 also include a push-to-reset 15A circuit breaker. 
Each unit comes standard with AC receptacles and 4 RJ -45 connectors. The UT240 connects to standard AC powe r outlets through a single 8 ft (2 m) power cord 
that is permanently attached to the unit.  The CAT-6  (RJ-45) connectors are snap-in style connectors that  attach to a support bracket on the inside of the 
faceplate; they are not bulkhead style connectors. Th e connectors must be snapped out of the bracket, wir ed to the CAT-5/6 cable, and then snapped back.  
Units with audio inputs have 3.5 mm female inputs on th e front of the unit and 3.5 mm female inputs on the back via an 8 in (200 mm) cable. The audio 
receiving devices attach to the cable on the back of  the unit. 
Units with video connectors have female-to-female bulk head connectors for both 15-pin HD and 24-pin DVI types. The video receiving devices attach to the 
bulkhead connectors accessible on the back of the unit . 
  
UT240-310 UT240-311
UT240-312 UT240-313
AC (2) 
Net (4)
Net (4)
AC (4)
Net (4)
AC (2)
Net (4)
AC (2)
DVI-I (2)
VGA (2)
Audio (2)
VGA (2)
UT240-411 Europe 
UT240-511 Australia UT240-451 England
UT240-551 Universal
UT240-510 Australia
UT240-410 Europe UT240-450 England
UT240-550 Universal
* The circuit breaker is located on the inside of t he left-hand side
 of each unit as viewed from the front. (see Diagra m 14)
Circuit Breaker (1)   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
4 
6. Application Diagrams  
Diagram 1: Typical Setup 
   
UT240-310 Shown Above
UT240 Series
   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
5 
Diagram 2: UT240-310 U.S./Canada 
                                       
Diagram 3: UT240-311 U.S./Canada 
   
3.095
 [79mm]
1.850
 [47mm]
9.400
 [239mm]
10.400
 [264mm]
2.300
 [58mm]
 
2.300
 [58mm]3.095
 [79mm]
1.850
 [47mm]
6.636
 [169mm]
7.636
 [194mm]
   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
6 
Diagram 4: UT240-312 U.S./Canada 
                                       
Diagram 5: UT240-313 U.S./Canada 
   
1.850 [47mm]
10.400
 [264mm]
2.300
 [58mm]3.095
 [79mm]
9.400
 [239mm]
 
10.596 [269mm]
11.596
 [295mm]
2.300
 [58mm]3.095
 [79mm]
   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
7 
Diagram 6: UT240-410 Europe 
                                       
Diagram 7: UT240-411 Europe 
   
14.294
 [363mm]
2.300
 [58mm]3.095
 [79mm]
13.294
 [338mm]
2.450
 [62mm]
12.400
 [315mm]
2.300
 [58mm]3.095
 [79mm]
2.450
 [62mm]
11.400
 [290mm]
   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
8 
Diagram 8: UT240-450 England 
                                       
Diagram 9: UT240-451 England 
   
14.294
 [363mm]
2.300
 [58mm]3.095
 [79mm]
13.294
 [338mm]
2.450
 [62mm]
12.400
 [315mm]
2.300
 [58mm]3.095
 [79mm]
2.450
 [62mm]
11.400
 [290mm]
   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
9 
Diagram 10: UT240-510 Australia 
                                     
Diagram 11: UT240-511 Australia 
   
13.294
 [338mm]
14.294
 [363mm]
2.300
 [58mm]3.095
 [79mm]
2.450
 [62mm]
3.095
 [79mm]
2.450
 [62mm]
11.400
 [290mm]
12.400
 [315mm]
2.300
 [58mm]
   
						

							UT Series
UT Series UT Series
UT Series 
  
 User’s Guide 
  
 
400-0491-004 
 
         
10 
Diagram 12: UT240-550 Universal 
                                     
Diagram 13: UT240-551 Universal 
   
13.294
 [338mm]
14.294
 [363mm]
2.300
 [58mm]3.095
 [79mm]
2.450
 [62mm]
3.095
 [79mm]
2.450
 [62mm]
11.400
 [290mm]
12.400
 [315mm]
2.300
 [58mm]