Aluratek UNDER TABLE 5X2 HDMI SWITCHER UT260052 User Guide

UNDER TABLE 5X2 HDMI SW
UNDER TABLE 5X2 HDMI SW UNDER TABLE 5X2 HDMI SW
UNDER TABLE 5X2 HDMI SW
ITCHER
ITCHER ITCHER
ITCHER
 User’s Guide 
400-0607-001   
 
Welcome! 
Everyone at Altinex greatly appreciates your purchase of the 
UT260-052. We are confident that you will find it t o be reliable 
and simple to use. If you need support, please do n ot hesitate to 
call us at 714-990-2300.   
At Altinex, we are committed to developing unique a nd state of 
the art Signal Management Solutions
® for demanding...

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  2 
 
4. Technical Specifications 
Specifications are subject to change due to design  improvements. Please see www.altinex.com for up to date information.
Features/Description  UT260-052 
Input Connectors 
Digital Video + Audio  HDMI F, Type A (5) 
Power  DC Jack 2.5 mm F (1) 
Configuration/Control  RJ-45, Ethernet (1) 
Media Player  USB 2.0 Type A F (1) 
Output Connectors  
Digital Video + Audio  HDMI F, Type A (2) 
Analog...

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  3 
 
5. About Your UT260-052  
·  Automatic TV power on/off through CEC Control for  compatible HDTVs 
·   Automatic input detection 
·   TCP/IP control of input select 
·   HDMI resolutions up to 1080p (no MHL support) 
·   Automatic switching using ShareTime controllers 
·   Show Me button support for CNK inputs 
·   Breakout analog stereo audio 
·   4 GB USB flash drive provided for internal Media P layer 
The UT260-052...

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  4 
 
6. Application Diagrams 
Diagram 1: Typical Setup 
 
        

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  5 
 
Diagram 2: Internal View 
       
 
       

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  6 
 
Diagram 3: Dimensions 
     
    

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  7 
 
Diagram 4: Input Select Controls   
Below there are two examples on how to connect the  terminal blocks. 
Terminal blocks are not included.              

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  8 
 
7. Operation 
Users connect their device (phone, laptop, etc.) to  one of the 
input connections; ShareTime or TNP with Show Me Bu tton.  
If the switcher is sleeping,  
the switcher automatically  
wakes up on signal  
detection or when a Show 
Me button is pressed. On 
wake up, the switcher  
sends CEC commands to  
turn on the TVs and switch 
to the appropriate input. Next, the media player in put is 
selected and...

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  9 
 
7.1.6 Update  
Update mode is available to allow the switcher’s in ternal 
firmware to be updated. Send the command [PRG] or p ress 
and hold any input select key for about 7 seconds t o enter 
update mode. All LEDs (switcher and input select) f lash 
several times to indicate update has started.  
Once in update mode, the firmware must be updated.  If update 
mode is entered by accident, reset the switcher pow er to...

UT260
UT260 UT260
UT260-
--
-052
052052
052
   User’s Guide 
  
 
400-0607-001
  10 
 
7.5 TCP/IP Control  
A third party controller or touch panel can be used  to control 
the UT260-052.The TCP/IP control commands provide f ull 
control of the switcher; inputs can be selected, th e TV can be 
turned on or off, the status of the switcher can be  read, 
firmware can be updated, etc.   
The control commands for the UT260-052 are in a sim ple 
ASCII character format. Control can be achieved fro m the 
same...