Home
>
Aluratek
>
Audio-visual interconnect box
>
Aluratek UNDER TABLE 4X1 HDMI SWITCHER UT260041 User Guide
Aluratek UNDER TABLE 4X1 HDMI SWITCHER UT260041 User Guide
Here you can view all the pages of manual Aluratek UNDER TABLE 4X1 HDMI SWITCHER UT260041 User Guide. The Aluratek manuals for Audio-visual interconnect box are available online for free. You can easily download all the documents as PDF.
Page 1
UNDER TABLE 4X1 HDMI SWITCHER User’s Guide 400-0616-001 1 Welcome! Everyone at Altinex greatly appreciates your purchase of the UT260-041. We are confident that you will find it to be reliable and easy to use. If you need support, please do not hesitate to call us at 714-990-2300. At Altinex, we are committed to developing unique and state of the art Signal Management Solutions® for demanding audiovisual installations. Welcome to the Altinex family of satisfied customers around...
Page 2
UT260-041 User’s Guide 400-0616-001 2 3. Warranty and Return Policies Please visit the ALTINEX website at www.altinex.com for details on warranty and return policies. In the case of a unit needing repair, please complete a RMA (return material authorization) form located on the bottom left hand corner of the Altinex homepage. Once completed, please email the form to [email protected]. 4. Technical Specifications Specifications are subject to change due to design improvements. Please see...
Page 3
UT260-041 User’s Guide 400-0616-001 3 5. About Your UT260-041 Easy collaboration with ShareTime. 4 HDMI inputs, 1 HDMI output. HDMI and HDCP compliant. Simple setup and operation. Automatically powers CEC displays on and off (using ShareTime controllers) Auto-switch to new signals The UT260-041 Switcher is a high performance four-input and one-output High-Definition Multimedia Interface (HDMI) switcher with HDCP repeater functions along with fast switching between HDMI input ports....
Page 4
UT260-041 User’s Guide 400-0616-001 4 6. Application Diagrams Diagram 1: Typical Setup
Page 5
UT260-041 User’s Guide 400-0616-001 5 Diagram 2: Dimensions
Page 6
UT260-041 User’s Guide 400-0616-001 6 7. Operation Users connect their device (phone, laptop, etc.) to one of the input cables above the table surface. Their video input is selected using any combination of ShareTime collaborative controllers, input select button found on the side of the unit, or the remote control included. Additionally, the auto-switch feature automatically switches to a newly applied signal. If there are no active sources; the ShareTime standby screen displays until an input...
Page 7
UT260-041 User’s Guide 400-0616-001 7 7.1.3 Remote Control A remote control is provided for installations where it is not practical for direct cable control. For best results, have a direct line of sight for the remote IR signal to reach the IR receiver on the switcher or use an IR extender. Access to the main menu displays the system information. The ARC feature can be enabled or disabled as well. Following are the main remote control functions: 1, 2, 3, 4: Press to select input port. If no...
Page 8
UT260-041 User’s Guide 400-0616-001 8 8. Troubleshooting Guide We have carefully tested and have found no problems in the supplied UT260-041. However, we would like to offer suggestions for the following: Switcher Symptom Resolution ShareTime Controllers do not deselect Press and hold the configuration button with a paperclip for 8 seconds until LED turns a solid RED and release. Upon release, deselect will be enabled and the ShareTime unit will reset. Poor Output Image Troubleshoot with a...