Aluratek COMPLETE CNK200S CABLE NOOK WITH SP3504SC SILVER CNK210S User Guide

							CNK200 Cable-Nook
®
 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
 
1 
 
 
Welcome! 
We greatly appreciate your purchase of the CNK200 Cable-Nook 
Interconnect Box. We are sure you will find it reliable and simple to use. 
Superior performance for the right price, backed by solid technical and 
customer support is what Altinex has to offer. 
We are committed to providing our customers with Signal Management 
Solutions® to the most demanding audiovisual installations at competitive 
pricing and we welcome you to join the ranks of our many satisfied 
customers throughout the world. 
1. Precautions and Safety Warnings 
Please read this manual carefully before using your CNK200 Cable-Nook 
Interconnect Box. Keep this manual handy for future reference. These safety 
instructions are to ensure the long life of your CNK200 and to prevent fire 
and shock hazards. Please read them carefully and heed all warnings. 
1.1 General 
 Qualified ALTINEX service personnel or their authorized 
representatives must perform all service. 
1.2 Installation 
 For best results, place the CNK200 Cable-Nook Interconnect Box in a 
dry area away from dust and moisture. 
 To prevent fire or shock, do not expose this unit to water or moisture. 
Do not place the CNK200 in direct sunlight, near heaters or 
heat-radiating appliances, or near any liquid. Exposure to direct 
sunlight, smoke, or steam can harm internal components. 
 Handle the CNK200 carefully. Dropping or jarring can damage the 
unit. 
 Never place fingers inside the openings in the back of the unit. This 
action could cause serious injury because of the sharp edges inside.  
 Do not place heavy objects on top of the CNK200. 
 Install all cables according to the instructions. 
1.3 Cleaning 
Clean surfaces with a dry cloth. Never use strong detergents or solvents such 
as alcohol or thinner. Do not use a wet cloth or water to clean the unit. 
1.4  FCC Notice 
 This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 
 This equipment has been tested and found to comply with the limits 
for a Class A digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio 
frequency energy and if not installed and used in accordance with 
instructions found herein, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 
 Any changes or modifications to the unit not expressly approved by 
Altinex, Inc. could void the user’s authority to operate the equipment. 
 
 
2. Installation Procedures 
WARNING: Altinex recommends using an experienced professional to make the table cutout. Before starting, go to the Altinex website at www.altinex.com 
and download the latest table cutout requirements, templates, and detailed installation instructions with diagrams. 
Step 1. Cut an opening into the table for the CNK200. Use the template and measurements provided on the Altinex website. The CNK200 is designed to fit 
tabletops 0.5 - 3.5 in (13-89 mm) thick. 
Step 2. Insert the CNK200 into the table cutout and secure it to the table using the 
brackets and thumb screws provided.  
Step 3. Prepare cables for use with the CNK200. When using retaining brackets to 
hold cables in place, it is important to adjust the retaining brackets close 
enough together to prevent the cables from falling, but loose enough to 
allow the cables to be pulled up easily.  The cables should be long enough to 
be pulled up through the CNK200 and reach the equipment. 
  If using preconfigured or customizable sectional plates, the cables need only 
be long enough to mate with the cables/connectors on the plates. 
Step 4. If desired, bundle like cables together using a protective sheath, meshed 
sleeve, etc.  Leave the free ends of the cables long enough for making 
connections to the equipment on the table. 
Step 5. Route the cables through the bottom of the unit to the top. Use the cable 
clamps provided to neatly route and secure the cables to the bottom of the 
table. 
3. Limited Warranty/Return Policies Please see the Altinex website at www.altinex.com for details on warranty and return policies. SURFACE
TABLE  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
2 
 
4. Technical Specifications 
Specifications are subject to change. See www.altinex.com for up-to-date information. 
 
Features/Description CNK200 
Inputs  
  Video/Audio n/a 
Outputs  
  Video/Audio n/a 
Compatibility  
  Cable-Nook Standard and   Customizable Plates 
   CN5000 Series,    CNK-IP-100 Series 
   or 
   CNK-IP-200 Series 
  Snap-In Connectors    All Altinex Snap-In    Connectors 
Accessories Included  
  Mounting Hardware    Thumb Screws (2),     Mounting Brackets (2) 
Table 1. CNK200 General  
Mechanical CNK200 
Hole Sets  23 
Minimum Table Thickness 0.5 in (13 mm) 
Maximum Table Thickness 3.5 in (89 mm) 
Housing Dimensions  
   Height 4.7 in (119 mm) 
   Width 6.0 in (153 mm) 
   Depth 4.7 in (119 mm) 
Bezel Dimensions (surface)  
   Width 7.9 in (200 mm) 
   Depth 6.5 in (166 mm) 
Color: CNK200            CNK200S Black Brushed Aluminum 
Material Aluminum 
T Operating 10C-35C 
T Maximum 50C 
Humidity 90 non-condensing 
MTBF (calculations) 40,000 hrs (min.) 
Table 2. CNK200 Mechanical  
  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
3 
 
 
5. About Your CNK200 
 Installs easily into tabletop  
 Convenient access to cables  
 Simple, cost-effective interconnect solution  
 Fits table surfaces 0.5 - 3.5 in (13 - 89 mm) thick 
The CNK200 is a simple, effective way of hiding/storing multimedia cables and connectors and is designed for boardrooms and conference rooms. Cables 
remain connected to a presentation system enabling the user to access connections to AC power, video, audio, and other media sources. 
The CNK200 Cable-Nook is designed for use with tables ranging from half an inch to 3.5 in thick. The height of the interior shelf can also be adjusted for 
different depths. The CNK200 comes in a standard matte black color; the CNK200S is brushed aluminum. 
The CNK200 sectional plates allows for diverse connector configurations. Available plates include combinations of audio, video, computer, and AC power 
connectors, providing extensive flexibility in a convenient package. The sectional plates connect permanently to the presentation system. 
CNK200 with CN5000 and CNK-IP-100 Series Plates 
The cables connect to the presentation system underneath the surface and are accessed from the CNK200 by either pulling the cables up and out of the top 
of the unit (using retaining brackets) or by plugging external cables into sectional plates installed in the CNK200.  
Retaining brackets secure cable ends where the brackets can be adjusted to fit a wide variety of cable sizes.  Cables are pulled out from the top of the 
CNK200 when needed and then fed back down under the table when no longer required. The weight of the cables helps to feed the slack through the unit 
and the cable ends are kept from falling by the retaining brackets.  
CNK200 with 210 Series Plates 
The 210 Series sectional plates allow for the same diverse connector configurations and are available in various combinations of audio, video, computer, and 
AC power connectors, providing extensive flexibility in a convenient package. The sectional plates have bulkhead style connectors and connect 
permanently to the presentation system.  See Diagram 5 on page 8 for more details. 
 
 
 MOUNTING BRACKET
ACCESS DOOR
BEZEL
HOUSINGSUPPORTS
ADJUSTABLE
SHELF HOLES
SAMPLE CONFIGURATION:
RETAINING BREACKETS
and CUSTOM PLATES  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
4 
 
6. Application Diagrams 
Diagram 1: Typical Setup 
 
 
  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
5 
 
Diagram 2: Dimensions Top and Front 
 
 
 6.0
 [153 mm]
4.7
[119 mm]
6.5
 [166 mm]
7.9
 [200 mm]  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
6 
 
Diagram 3: Side View Dimensions 
 
 
 4.7
 [119 mm]
5.3
 [134 mm]
3.9
 [100 mm]
4.7
[119 mm]
6.0
 [153 mm]  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
7 
 
Diagram 4: Twenty-Three (23) Hole Sets 
The CNK200 can be customized for virtually any configuration required. Inside, there are 23 hole sets available for installing preconfigured plates, customizable 
plates, or retaining brackets for holding cables.  
In some cases, it is desirable to have the cables reside in the Cable-Nook instead of requiring the user to provide their own cables. In this case, retaining brackets 
can be positioned to keep cables installed under the table from falling below the Cable-Nook’s interior shelf. The user simply pulls out the cable(s) needed and 
connects them to a laptop, iPod, etc. 
Shown below are some typical plate options with retaining brackets. See our website at www.altinex.com for a complete list of available plates and customizable 
snap-in connectors.  
 
 
 23 HOLE SETS
WITH LID OPEN
TOP INSIDE VIEW
RETAINING
BRACKETS
PLATES
POWER
CUSTOMIZABLE
SNAP-IN PLATES
TO HOLD CABLES
STANDARD
PLATES  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
8 
 
Diagram 5: The 210 Series Option 
The CNK-IP-210 Series plates do not use the hole sets that the CN5000 and CNK-IP-100 Series plates used. Instead, the hole set rails are removed and the 
CNK-IP-210 is mounted directly to the CNK200 chassis. The CNK-IP-210 has three openings that can accommodate different configurations of power, audio, 
video, and control interfaces.  
The video, audio, and snap-in connectors are bulk-head style connectors. The bottom (or inside) connectors connect to off-the-shelf cables which connect 
permanently to the presentation system. 
Shown below is the blank CNK-IP-210 as well as a standard configuration plate. In the example below, the SP3504SC standard configuration is shown. This plate 
provides AC power, dual AC charging ports, video and audio connectors for both VGA and DIGITAL video. Additionally, this plate has 6 blank snap-in ports that 
can be populated using your own snap-ins or you can purchase custom snap-ins from Altinex. See our website at www.altinex.com for a complete list of available 
plates and customizable snap-in connectors.  
 
   
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
9 
 
Diagram 6: Mounting 
 
 
 MOUNTING BRACKETSTHUMB SCREWS
Place the mounting 
brackets on the 
mounting supports as 
shown in Detail A.
Insert the CNK200 
through the opening in 
the table.
1
2
MOUNTING HARDWARE
MOUNTING EXAMPLE
TABLE SURFACE
Detail A
Insert and tighten thumb 
screws as shown until 
the housing is secured 
to the surface.
3  
						

							CNK200 Interconnect Box User’s Guide 
400-0111-008  
 
 
 
 
 
10 
 
7. Operation 
7.1 Accessing the CNK200 
The CNK200 cover opens easily and remains open until all the cables are 
connected. The cover should be closed with the cables routed through the 
curved opening to prevent damage to the unit and to prevent liquids from 
entering the opening.  
Additionally, the cover should be closed when not in use to prevent liquids 
or other debris from damaging the unit. 
7.2 Power/Signal Connections 
Connect external devices to the appropriate connector from the CNK200.  
Remember, the devices plugged into the AC power connectors should not 
draw more than the rated values of the cables and/or circuit. 
 
8. Troubleshooting Guide 
The CNK200 supplied was carefully tested and no problems were detected. 
However, we would like to offer the following suggestions: 
Please make sure that the highest quality network cables are used.  
Make sure that no cable or power cord is damaged or pinched. If there has 
been damage, do not use the CNK200. Please call the Altinex 
Customer Service Department at (714) 990-2300 to have the unit 
repaired.