Altinex TILT N PLUG JR TABLETOP INTERCONNECT BOX SOUTH AFRICA TNP451 User Guide

							Tilt ‘N Plug® Jr. Interconnect Boxes
Tilt ‘N Plug® Jr. Interconnect Boxes Tilt ‘N Plug® Jr. Interconnect Boxes
Tilt ‘N Plug® Jr. Interconnect Boxes 
  
 User’s Guide 
  
 
400-0110-010 
 
         
1 
Welcome! 
We greatly appreciate your purchase of the TNP124, TNP152, TNP162, 
TNP421, TNP431, TNP441, or TNP451 Tilt ‘N Plug Jr.  Interconnect Boxes. 
We are sure you will find it reliable and simple to u se. Superior performance 
for the right price, backed by solid technical and c ustomer support is what 
ALTINEX has to offer.  
We are committed to providing our customers with  
Signal Management Solutions
® to the most demanding audiovisual 
installations at very competitive pricing and we welc ome you to join the 
ranks of our many satisfied customers throughout the wo rld. 
1. Precautions and Safety Warnings 
Please read this manual carefully before using your Tilt ‘N Plug Jr. Keep this 
manual handy for future reference. These safety instru ctions are to ensure 
the long life of your Tilt ‘N Plug Jr.    
 and to prevent fire and shock hazards. 
Please read them carefully and heed all warnings. 
1.1 General  ·  
Qualified ALTINEX service personnel or their authoriz ed 
representatives must perform all service. 
1.2 Installation Precautions  ·  
For best results, place the Tilt ‘N Plug Jr. in a dry  area away from dust. 
· To prevent fire or shock, do not expose this unit to w ater or moisture. 
Do not place the Tilt ‘N Plug Jr. in direct sunlight , near heaters or heat 
radiating appliances, or near any liquid. Exposure t o direct sunlight, 
smoke, or steam can harm internal components. 
·  Handle the Tilt ‘N Plug Jr. carefully. Dropping or  jarring can damage 
the bezel. 
·  Never place fingers inside the opening on either side  of the unit. This 
action could cause injury due to sharp edges inside. 
·  Do not place heavy objects on top of the Tilt ‘N Plu g Jr. Do not use 
excessive force to push down on the top of the unit.  
·  Disconnect the power cord to turn off the main power . This supplies 
power to the power socket on the pop up panel. The p ower outlet 
should be installed near the equipment and should be e asily accessible. 
· We recommend using outlets with a Ground Fault Circui t Interrupter 
(GFCI) for maximum protection. 
·  Install all cables according to the instructions foun d herein. Do not 
force or pull any cables or power cords attached to  the Tilt ‘N Plug Jr. 
1.3 Cleaning · 
Surfaces should be cleaned with a dry cloth. Never u se strong 
detergents or solvents such as alcohol or thinner. Do  not use a wet cloth 
or water to clean the unit. 
1.4 FCC Notice ·  
This device complies with Part 15 of the FCC Rules. O peration is 
subject to the following two conditions: (1) This devi ce may not cause 
harmful interference, and (2) this device must accep t any interference 
received, including interference that may cause unde sired operation. 
· This equipment has been tested and found to comply wit h the limits for 
a Class A digital device, pursuant to Part 15 of the  FCC Rules. These 
limits are designed to provide reasonable protection a gainst harmful 
interference when the equipment is operated in a co mmercial 
environment. This equipment generates, uses, and can ra diate radio 
frequency energy and, if not installed and used in ac cordance with the 
instructions found herein, may cause harmful interfe rence to radio 
communications. Operation of this equipment in a re sidential area is 
likely to cause harmful interference in which case t he user will be 
required to correct the interference at his own expe nse. 
· Any changes or modifications to the unit not expressly  approved by 
ALTINEX, Inc. could void the user’s authority to op erate the 
equipment. 
 
 
 
2. Installation Procedures 
Step 1.  Cut an opening into the table’s surface. Ref er to the ALTINEX website at www.altinex.com for table cutout requirements. 
  Note: The table can be 2.25” or less in thickness. Al ways confirm dimensions before cutting to insure that specifications have not changed. 
Step 2.  Insert the Tilt ‘N Plug Jr. into the table c utout. 
Step 3.  Place the support brackets under the table a nd place them between the support mount grooves on t he side of the Tilt ‘N Plug Jr. Attach the brackets to 
the groove at the desired height and secure them to t he bottom of the table using the thumb screws provided . 
Step 4.  Secure the cables by using the provided cable  clamps and screws included with the unit. Pass the pow er cord from the bottom of the housing and 
attach it to the table using the cable clamp and scr ew supplied with the Tilt ‘N Plug Jr. 
  Leave enough slack in the service loop to allow for  easy opening and closing, but not too much as to cause excess drooping of the service loop.  
Step 5.  Connect the appropriate cables with the corr ect input connectors on the bottom of the unit. 
Step 6.  Once you have applied power and connected t he proper cables on the bottom of the unit you may raise the unit. To raise the Tilt ‘N Plug Jr. into 
position, push down on the front of the top cover; th e latching mechanism will then release, allowing the pneumatic spring to raise it into position. 
Step 7.  To lower the unit, push on the top of the Ti lt ‘N Plug Jr. until it locks into place. 
 
3. Limited Warranty/Return policies 
Please see the ALTINEX website at www.altinex.com for  details on warranty and return policies.   
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
2 
4. Technical Specifications 
Specifications are subject to change. See www.altinex.com for up-to-date information.
Features/Description  TNP Jrs. 
 
TNP124 
AC Power  110 VAC, 60 Hz, 5 A   NEMA F-M (4F to 4M) 
Computer Video  15-pin HD F-M (4) 
Computer Audio  3.5mm F-M (4) 
Modem RJ-11 F-M (4) 
CAT-6 Network  RJ-45 F-M (4) 
Compatibility  United States 
  TNP152 
AC Power  110 VAC, 60 Hz   NEMA F-M (4F to 2M) 
CAT-6 Network  RJ-45 F-M (4) 
Compatibility  United States 
 TNP162 
AC Power  110 VAC, 60 Hz   NEMA F-M (3F to 2M) 
Computer Video  15-pin HD F-M (1) 
Computer Audio  3.5mm F-M (1) 
Modem RJ-11 F-M (1) 
CAT-6 Network  RJ-45 F-M (3) 
Compatibility  United States 
 TNP421/431/441/451 
AC Power  220-240 VAC, 50/60 Hz   International F-M 
Computer Video  15-pin HD F-M (1) 
Computer Audio  3.5mm F-M (1) 
CAT-6 Network  RJ-45 F-M (2) 
Compatibility  TNP421  
  TNP431 
  TNP441  
  TNP451  Germany 
England 
Australia 
South Africa 
  ALL 
Audio, Video, Comm. Cables  6 ft (2 m) 
AC Power Cord  10 ft (3 m) 
Accessories Included  Mounting screws, cable clamps 
Table 1. TNP Jr. General 
   
Mechanical  TNP Jrs. 
 TNP124 
 Width 8.7 in (221 mm) 
 Height, opened  5.5 in (140 mm) 
 Depth 9.3 in (236 mm) 
 Net Weight (approx.)  11.0 lb (5.0 kg) 
 Shipping Weight  13.0 lb (5.9 kg) 
  TNP152/162 
 Width 8.7 in (221 mm) 
 Height, opened  5.5 in (140 mm) 
 Depth 4.9 in (124 mm) 
 Net Weight (approx.)  5.1 lb (2.3 kg) 
 Shipping Weight  6.8 lb (3.1 kg) 
 TNP421/431/441/451 
 Width  5.7 in (145 mm) 
 Height, opened  6.4 in (163 mm) 
 Depth 5.2 in (132 mm) 
 Net Weight (approx.)  3.2 lb (1.5 kg) 
 Shipping Weight  3.7 lb (1.7 kg) 
  ALL 
 Max. Table Thickness  2.25 in (57 mm) 
 T° Operating   10 °C-35 °C 
 T ° Maximum  40°C 
 Humidity 
90% non-condensing 
 Finish  Matte Black 
   Table 2. TNP Jr. Mechanical   
Electrical  TNP Jrs. 
  TNP124 
Single Outlet Panel   
  Pass-through Power Rating 5 A per connector max. 
10 VAC, 60 Hz 
  TNP152/162 
TNP152  Dual Outlet Panel  
  Pass-through Power Rating 2.5 A per connector max. 
110 VAC, 60 Hz 
TNP162  Dual Outlet Panel   
  Pass-through Power Rating  Dual AC Tilt-Up Module: 
2.5 A per connector max.  110 VAC, 60 Hz 
 
Single AC Tilt-Up Module:  5 A max. 110 VAC, 60 Hz 
  TNP421/431/441/451 
Single Outlet Panels   
  Pass-through Power Rating  5 A max. 
220-240VAC, 50/60Hz 
   Table 3. TNP Jr. Electrical   
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
3 
5. About Your Tilt ‘N Plug Jr. 
All Tilt ‘N Plug Jrs. belong to a family of compact
 interconnection solutions designed for installation in to a table as part of a presentation system. They are 
designed for mounting into a table, podium, or other  furniture to provide a way of connecting audiovisual equipment on top of the furniture to a presentation 
system below the furniture.  
All use the same core element; a multimedia input pl ate that can be tilted open when needed and pushed  closed when not needed. 
The TNP152 and TNP162 incorporate two tower modules , and the TNP124 incorporates four individual modules. Each module can be operated independently; 
the TNP124 and TNP152 can service from one to four u sers simultaneously. During installation of the TNP152/162, the individual tower modules can be 
reversed to face opposite directions through a simple f ield modification to the bezel. This alternative configuration is handy for applications in which the 
TNP152/162 needs to service two sides of a table simulta neously. 
The TNP162 is a dual module configuration with a TNP 121 module and a TNP151 module side by side. The TNP1 24 is a quad TNP121 with two rows of twin 
modules facing in opposite directions; the modules in t he TNP124 cannot be reversed. 
The TNP421, TNP431, TNP441, and TNP451 are internat ional models with power connectors for specific countries. The TNP421 has a standard Schuko 
receptacle for most European countries.  The TNP431 i s for the U.K., Singapore and Hong Kong, the TNP441 is for Australia and New Zealand, and the TNP451 
is for South Africa. Versions of the TNP121/122/124/13 1/142 with a universal IEC320 connector instead of the U.S. power connector are also available. 
All signals pass through the input plate directly to ca bles on the underside of the table with no intervening circuitry. The use of additional ALTINEX Signal 
Management Solutions® such as computer video interfa ces, distribution amplifiers, and switchers may be desirable. 
The input plate of the Tilt ‘N Plug Jr. is accessible  by pushing down on the top cover. The unit then auto  tilts open with help from an internal pneumatic spring. 
Once open, the input plate remains securely in plac e. The input plate is hidden by pressing down on the  top cover until the latching mechanism engages. In its 
closed position, the top panel lies flush with the tabl e’s top, held in place by the latching mechanism. 
All Tilt ‘N Plug Jr. Signal Management Solutions com e with a standard top and bezel offering a high quality matte black finish. Other finishes or special beze l 
configurations are available upon request. Please con tact an ALTINEX representative to discuss custom option s. 
 
      
 
 
Standard Faceplate Features 
Standard Faceplate Features  Standard Faceplate Features 
Standard Faceplate Features –
––
– TNP124 and TNP162
 TNP124 and TNP162  TNP124 and TNP162
 TNP124 and TNP162 
Power
110VAC, 5A
Phone Jack3.5mm Female Stereo Audio
15-pin HD Female (VGA type) Computer/Component Video
CAT-6 NetworkRJ-45 Female
RJ-11 Female
 
Standard Faceplate Features 
Standard Faceplate Features  Standard Faceplate Features 
Standard Faceplate Features –
––
– TNP124 and TNP162
 TNP124 and TNP162  TNP124 and TNP162
 TNP124 and TNP162 
AC Power
110VAC, 2.5AAC Power
110VAC, 2.5A
CAT-6 Network
RJ-45 Female (2)    
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
4 
 
Standard Faceplate Features 
Standard Faceplate Features  Standard Faceplate Features 
Standard Faceplate Features -
--
- International
 International International
 International 
  
 
 
220-240V ~ 5A 50/60Hz 
COMPUTER VIDEOAUDIO
ALTINEXTilt ‘N Plug Jr.
TMTM
AUDIO
COMPUTER VIDEO
Tilt ‘N Plug Jr.220-240V ~ 5A 50/60Hz ALTINEX
TM
Tilt ‘N Plug Jr.
COMPUTER VIDEO
ALTINEX
AUDIO
220-240V ~ 5A 50/60Hz 
220-240V ~ 5A 50/60Hz 
ALTINEXTilt ‘N Plug Jr.TM
220VAC, 5A AC Power
TNP421 TNP431
220VAC, 5AAC Power
TNP451
220VAC, 5A
AC Power
TNP441
CAT-6 NetworkRJ-45 Female (2) CAT-6 Network 
RJ-45 Female (2)
RJ-45 Female (2)
CAT-6 Network
RJ-45 Female (2)
CAT-6 Network
Computer/Component Video
Computer/Component Video Computer/Component Video
15-pin HD Female (VGA type)
3.5mm Female
Stereo Audio
3.5mm Female
Stereo Audio
3.5mm Female
Stereo Audio
15-pin HD Female (VGA type)
15-pin HD Female (VGA type)
220VAC, 5A
Computer/Component Video
15-pin HD Female (VGA type)
Stereo Audio 
3.5mm Female AC Power
   
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
5 
6. Application Diagrams  
Diagram 1: TNP124 Dimensions 
   
 [221 mm]
2.0
 [50 mm]
5.5
 [140 mm]
3.5
 [90 mm]
9.3
 [236 mm]
   
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
6 
Diagram 2: TNP152 Dimensions 
   
 [221 mm]
3.5
 [90 mm]
5.5
 [140 mm]
4.9
 [124 mm]
2.0
 [50 mm]  
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
7 
Diagram 3: International Dimensions 
   
TNP421, TNP431, 
TNP441, TNP451  Dimensions
5.2
 [132 mm]
5.7
 [145 mm]
6.4
 [162 mm]
2.5
 [64 mm]
3.9
 [98 mm]
   
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
8 
Diagram 4: TNP Mounting 
   
Tabletop
Screw
Securing Table
Bracket
SupportScrew Table
Securing
Bracket
Support
   
						

							Tilt ‘N Plug
Tilt ‘N Plug Tilt ‘N Plug
Tilt ‘N Plug 
  
 Jr.
Jr.Jr.
Jr. 
  
 User’s Guide 
  
 
 
400-0110-010 
         
9 
7. Operation  
7.1 Opening and Closing the TNP 
The TNP will open easily when the top is pressed down 
and then released. 
When  the  TNP  is  not  in  use,  simply  press  the  top  down  un til  it  is  level 
with the surface of the table and then release.  The  unit will remain hidden 
until needed again.  
7.2 Power/Signal Connections 
Connect external devices to the appropriate connect or on the TNP.  
Remember, the devices plugged into the AC power conn ectors should not 
draw more than 5A AC for any individual tilt-up mod ule. 
 
8. Troubleshooting Guide 
The Tilt ‘N Plug Jr. supplied unit was carefully teste d and no problems 
were detected. However, we would like to offer the  following suggestions: 
· Please make sure that the highest quality network cabl es are used.  
· Make sure that no cable or power cord is damaged or p inched. If there 
has  been  damage,  then  do  not  use  the  Tilt  ‘N  Plug  Jr.   Immediately 
contact  the  ALTINEX  Customer  Service  Department  to  h ave  the  unit 
repaired.