Altinex TILT N PLUG 2 X PWR 2 X USB HDMI AUDIO TNP358 User Guide

							TNP358 Tilt ‘N Plug® INTERCONNECT BOX User’s Guide 
400-0614-001 
 
 
 
 
 
1 
 
elcome!
We greatly appreciate your purchase of your TNP358 Series Tilt 
N Plug. You will find the TNP358 to be reliable and simple to use. 
We are committed to providing the best Signal Management 
Solutions® to our customers. 
We are committed to providing our customers with 
Signal Management Solutions® to the most demanding 
audiovisual installations at competitive pricing and we welcome 
you to join the ranks of our many satisfied customers throughout 
the world. 
1. Precautions and Safety Warnings  
Please read this manual carefully before using your TNP358 Tilt 
N Plug interconnect box. Keep this manual handy for future 
reference. These safety instructions are to ensure the long life of 
your Tilt N Plug and to prevent fire and shock hazards.  
1.1 General  
 Unauthorized personnel shall not open the unit or cable 
assembly as there are high-voltage components inside. Only 
qualified Altinex service personnel or their authorized 
representatives must perform all service.  
1.2 Installation Precautions  
 For best results, place the Tilt N Plug in a dry area away 
from dust and moisture. To prevent fire or shock, do not 
expose this unit to water or moisture. Do not place the unit in 
direct sunlight, near heaters or heat-radiating appliances, or 
near any liquid.  
 Handle carefully; dropping or jarring can damage the bezel.  
 Never place fingers inside the opening on either side of the 
unit. This action could cause injury due to sharp edges 
inside.  
 Do not place heavy objects on top of the Tilt N Plug. Do not 
use excessive force to push down on the top of the unit.  
 Disconnect the power cord to turn power off.  
 Install all cables according to the instructions found in this 
user guide. Do not force or pull any cable that is attached to 
the Tilt N Plug.  
1.3 Cleaning  
 Surfaces should be cleaned with a damp cloth. Due to the 
chrome finish, do not use any abrasive solutions.  
 
2. Installation Procedures  
Note: Download and read the entire online manual to become familiar with the TNP358 and for detailed installation instructions. 
Step 1. Cut an opening into the table’s surface. Refer to the Altinex website at 
http://www.altinex.com/ for table cutout requirements. This operation should be 
performed by experienced professionals in order to insure accuracy and to be 
aesthetically pleasing. 
NOTE: The table should be 2.25 in (57 mm) or less in thickness. Always confirm 
dimensions before cutting to insure that specifications have not changed. 
Step 2. Insert the TNP358 into the table cutout.  
Step 3. Place the support brackets under the table between the support mount grooves on the 
side of the unit. Attach the brackets to the groove at the desired height and secure them 
to the bottom of the table using the knurled table securing screws. Tighten wing nuts to 
secure the screw in place.  
Step 4. To lower the unit, push on the top cover until it locks into place.  
Step 5. Secure the power cable to the underside of the table using the cable clamps and screws included. Feed the power cord from 
the bottom of the TNP through the cable clamps, but leave enough slack in the service loop for easy opening and closing. Too 
much slack can cause excess drooping of the service loop. Secure the power cord separate from other cables. 
Step 6. To raise the unit into position, push down on the front of the top cover to release the latching mechanism, allowing the TNP to 
raise it into position.  
NOTE: It may be necessary to adjust the power cable service loop for optimal performance.  
 
3. Limited Warranty/Return Policies  
Please see the Altinex website at www.altinex.com for details on warranty and return policies.   
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
2 
 
4. Technical Specification 
Specifications are subject to change. Please visit http://www.altinex.com for up-to-date specification
Features/Description TNP358* 
General  
Outputs  
  USB Charging  USB 2.0 Type A F (2) 
Pass-Through Video 6 ft. (2 m) 
  Video (HDMI) HDMI F-M (1) 
  Computer Audio 3.5mm F-M (1) 
Pass-Through AC Power 9ft. (3.0 m) 
  120 VAC,60 Hz, 12A NEMA Socket-Plug (2) 
  GFCI Plug Type 2-Pole, 3 Wire Grounded 
Agency Approvals  
  UL Listed  File E254082 
Accessories Included  
  Hardware 
-Mounting screws/wing nuts 
-Brackets 
-Cable clamps/screws 
Table 1 TNP358* General Specifications 
 
 
Mechanical TNP358** 
Max. Table Thickness 2.25 in (57 mm) 
Height, opened 5.88 in (149 mm) 
Height, closed 3.80 in (97 mm) 
Width 5.7 in (145 mm) 
Depth 5.2 in (132 mm) 
Finish Polished Chrome 
Weight (approx.) 2.75 lb. (1.25 kg) 
Shipping Weight 5.5 lb. (2.5 kg) 
T Operating 10C - 35C 
T Maximum 40C 
Humidity 90 non-condensing 
Table 2 TNP358** Mechanical Specifications 
 
 
Electrical TNP358** 
Power Rating  
 (pass-through AC power) 
120VAC,60Hz, 
12A 
Power Rating 
 (USB 2.0 charging port) 5VDC, 3A total 
Ground Fault Trip Current 6mA max 
Table 3 TNP358** Electrical Specifications 
 
HDMI, the HDMI Logo, and High Definition Multimedia 
Interface are trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other countries. 
 
 
** Dimensions and ratings include models ending in C and S. * Includes models ending in S.  
    Models ending with C are customizable.  
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
3 
 
5. The TNP358 Interconnect Box 
 Safety covered dual 12 amp AC sockets 
 Dual charging USB ports (3 Amps max) 
 Ultra flat surface installation 
 Standard high quality black or brushed aluminum finish: 
TNP530: Matte Black   
TNP530S : Brushed Aluminum (Stain Proof Coating)   
 Simple, cut and drop-in installation 
 GFCI plug for added safety 
 
The TNP358 is a compact interconnect solution designed for mounting into tables, podiums, or other furniture. HDMI, audio, power and 
USB connections are accessed by pushing down on the top cover allowing the unit to tilt open.  
The connectors are hidden by pressing down on the top cover until the latching mechanism engages. In the closed position, the top 
cover lays virtually flush with the tabletop. This tabletop solution offers HDMI, audio and dual AC sockets along with 2 USB ports that 
can deliver up to 3A of charging power. The USB charger has a green LED to indicate power availability.   
The TNP358 was specifically designed for devices requiring a charging USB port. A single input power cable delivers power to both 
outlets and features a GFCI plug for added safety. The TNP358 is one of many solutions available in the TNP Jr. product line that can 
be customized with additional connectivity options. 
The quality and features of the TNP358 include 12 amp power outlet, 3 amps combined USB charger, UL listing, a GFCI plug and a 
smooth precision lifting design and easy installation. 
Tabletop solutions purchased from Altinex assure rock solid performance, the highest level of quality, and the most compact design on 
the market. We were the first in the world to introduce tabletop solutions to the Audio Visual industry 14 years ago and today our 
products are still in the field performing like new. 
The next time you need to spruce up your customers boardroom or university classroom, look no further than Altinex. So give us a call. 
We design, build, and support our products from the beautiful city of Brea in Southern California. 
  
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
4 
 
6. Application Diagrams 
Diagram 1: Application diagram for TNP358 
 
 
 
 
 
 
  
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
5 
 
Diagram 2: Front View 
 
 
  
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
6 
 
Diagram 3: Mounting 
 
  
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
7 
 
Diagram 4: Side Dimensions 
 
  
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
8 
 
Diagram 5: Side Dimensions 
 
  
						

							TNP358 User’s Guide 
400-0614-001 
 
 
 
 
 
9 
 
7. Operation 
7.1 Opening and Closing the Tilt N Plug 
The Tilt N Plug is opened by pressing down on the bezel and then releasing it. 
When the Tilt N Plug is not in use, simply press the top down until it is latched in place and then release.  The unit will remain hidden 
until needed again.  
7.2 Power/Signal Connections 
Connect external devices to the appropriate connector on the Tilt N Plug. 
 
 
8. Troubleshooting Guide 
The Tilt N Plug supplied was carefully tested before shipping. Please use tables below to rectify any potential difficulties: 
TNP 
Symptom Resolution 
USB ports are not 
charging 
1. Make sure that the power cord is connected. 
2. Make sure the USB green indicator LED is on 
3. Re-set GFI circuit on the power cord 
Damaged power cord 1. Make sure that power cord is not damaged or pinched.  
2. If there has been damage, do not use the Tilt N Plug. Please call the Altinex Customer Service 
Department at (714) 990-2300 to have the unit returned for repair. 
Testing the AC Plug 
Type 1: (not resettable) 
1. Plug power cord into wall receptacle. 
2. Press RESET button (Indicator should be ON). 
3. Press TEST button (Indicator should be OFF). 
4. Press RESET button for use. 
DO NOT USE TNP358 IF THIS TEST FAILS 
Type 2 (resettable) 
1. Plug power cord into wall receptacle. 
2. (Indicator should be ON) Press the TEST button. 
3. (Indicator should turn OFF) Press the RESET button. 
4. (Indicator should turn ON) unit is ready for use 
DO NOT USE TNP358 IF THIS TEST FAILS  
Unit raises too slowly 1. If the unit does not rise into position correctly, check the service loop for the power cord on the 
bottom of the unit. If the service loop is too small the cables will counteract the spring trying to 
raise the unit into position. 
Unit tilts up too fast 1. If the unit rises into position too fast, check the service loops for the power cord on the bottom 
of the unit. If the service loop is too large and the cables are putting upward pressure on the 
unit, the unit will tilt up faster than expected. 
Unit does not close all 
the way 
1. If the unit does not close flush with the bezel, check the service loop for the power cord on the 
bottom of the unit. If the service loop is putting upward pressure in the unit, the unit will not be 
able to seat all the way down.