AltiGen comm MAXCS 80 CU1 Application Notes User Manual

 
MaxCS 8.0 CU1 Guide Application Notes  Page 1 of 8 
 
MaxCS Release 8.0 CU1 
Application Notes 
 
 
April 12, 2016   

 
MaxCS 8.0 CU1 Application Notes  Page 2 of 8 
Contents 
About This Guide ........................................................................................................................................................... 3 
Installing MaxCS 8.0 CU1 ............................................................................................................................................... 3 
Time Zone Update...

 
MaxCS 8.0 CU1 Application Notes  Page 3 of 8 
About This Guide 
This guide describes the enhancements that are included in MaxCS 8.0 CU1.  They include: 
 Time zone update – AltiReport admins can now set a separate time zone for each MaxCS server.  This is 
done in the Query Preference setup; there are new fields for you to set the time zone for each server. 
When AltiReport users schedule favorite reports, the scheduled time will now use the time zone based 
upon the time zone of the users server....

 
MaxCS 8.0 CU1 Application Notes  Page 4 of 8 
Time Zone Update 
This release includes a new time zone setting for MaxCS server. The default MaxCS server time zone is the same as 
the AltiReport server time zone. 
To set or change the time zone for the MaxCS server: 
1. Log in as an AltiReport administrator. 
2. Click MaxCS Registration. 
3. Select a MaxCS server and click Edit. 
4. Select a time zone for the MaxCS server. 
Users can set the time zone for the MaxCS server: 
1. Log in as an AltiReport...

 
MaxCS 8.0 CU1 Application Notes  Page 5 of 8 
 
Paging Between Different MaxCS Servers 
    Users can now page extensions on another MaxCS server. Guidelines: 
 Cross-server paging works over SIP-tie trunks 
 Both servers must be in the same enterprise domain 
 The target paging group must be designated as a “Global Paging” group 
 The target extensions must be AltiGen 705, 710, 720, or 805 phones  
 Polycom phones will not receive and play the page 
 Users can use any type of phone to send a...

 
MaxCS 8.0 CU1 Application Notes  Page 6 of 8 
 
For instructions on configuring ADTRAN devices with MaxCS, review the ADTRAN deployment guides, which are 
stored in the AltiGen Partner Knowledgebase at http://know.altigen.com. To locate these guides, log in and search 
on the keyword “adtran.” 
Polycom Updates 
There are several Polycom enhancements included in this update. 
Polycom VVX Firmware 5.4.2 
MaxCS now supports Polycom VVX firmware version 5.4.2.    
After you have applied this update, you...

 
MaxCS 8.0 CU1 Application Notes  Page 7 of 8 
o http://supportdocs.polycom.com/PolycomService/support/global/documents/support/technical
/products/voice/upgrading_vv1500_5_2_0_tb695.pdf 
Change in the Blind Transfer Process 
The process of performing a Blind transfer on VVX phones has changed as a result of the new firmware.  
To perform a Blind transfer with firmware 5.4.2, 
1. The user should tap the Transfer button for 1 full second. 
2. A menu will open. The user should select the Blind transfer...

 
MaxCS 8.0 CU1 Application Notes  Page 8 of 8 
AltiGen provides technical support to Authorized AltiGen Partners and distributors only. End user customers, 
please contact your Authorized AltiGen Partner for technical support.  
Authorized AltiGen Partners and distributors may contact AltiGen technical support by the following methods: 
• You may request technical support on AltiGen’s Partner web site, at https://partner.altigen.com. Open a 
case on this site; a Technical Support representative will...