AltiGen comm AltiGen IP Phone IP805 Installation Guide

							Configuring your Phone  You configure your IP 805 phone’s network settings in one of two ways:  DHCP – By default, the IP 805 phone automatically tries to contact a DHCP server in your network in 
order to obtain its valid network settings, e.g. IP address, subnet mask, gateway, DNS server.  Static IP Address – If your phone cannot contact a DHCP server for any reason, you will need 
 to configure the IP address, subnet mask, gateway, primary DNS and secondary DNS for the  phone manually. You configure this information using menus on the phone itself.  
 
   
 
IP 805 Phone 
Note:  The wrong network settings may result in inaccessibility of your phone, and may have an impact on the network performance. Contact your system administrator for more information.  
To select commands in the phone’s menus, press the Menu button and use the  and  buttons to scroll through the options. Press the Menu button to return to the previous menu, press    to select a setting, and press Release to close all menus.
To manually configure network settings (for environments without a DHCP server): 
1. Disable DHCP on your phone: Press Menu and select Network > Enable DHCP > No. 
2. Press Menu and select Network.  
3. In the Network menu, configure the Local address, the Network mask, and the Gateway 
(use the  *  key when you need to enter the period character).  Press    to save your changes. 
4. Press Release to close the menus. 
To configure the server settings: 
1. Press Menu and select System > Server IP.  Enter the IP address of the MaxCS server 
(use the * key to enter the period character). Press    to save the changes.  Press Release to close the menus. 
2. Activate the IP 805 extension from the IP phone: With the handset on-hook, press #27 and 
press   .  Enter the extension number and press   .  Enter the password and press   . The phone will attempt to register.   
If the registration is successful, the phone shows the time and extension number in the LCD 
screen and is now in normal operating mode. If registration fails, the phone operates in Basic mode and the phone’s display shows (BASIC) IDLE; contact your administrator. 
   
   
   
 
 
For more configuration details, refer to chapters 2 and 3 in the IP 805 User Manual. 
Installation Guide 
Copyright © AltiGen Communications, Inc., 2015. All rights reserved.                                     4290-1805 
For MaxCS 8.0        
						

							Packing List  The following items are included in your package. If you find anything missing, contact your system administrator. 
 
 
3. Connect the network and power.  You have two options for network and power connections. Your system administrator will advise you on which one to use.   Handset Cord 
  Ethernet Cable 
  CD-ROM (Optional) 
 a.  AC Power Option 
     IP Phone 
  
 Handset 
   Power Adapter 
  
 Stand 
   Installation Guide 
 
 PC Connection (Optional) 
Internet Power Adapter (DC 5V) 
Assembling the Phone  
1. Attach the stand.   
b.  PoE (Power over Ethernet) Option   
 
  
 Deskmount  Method 
   
   
 PC Connection (Optional) 
IEEE 802.3af compliant PoE Hub/Switch 
   
   
Wallmount Method Note: If inline power (PoE) is provided, you don’t  need  to connect  the power adapter. Make sure the Ethernet cable and hub/switch are PoE compliant. 
 
2. Connect the handset and optional headset.  
  Note: Headsets are purchased separately. 
Installation Guide 
 
Startup 
 
After the IP phone has been connected to the network and supplied with power, it automatically begins a process of initializing itself on the network. 
    
 
Initializing 
Please wait 
 
   
 IP 805 Installation Guide