Home > Altek > Calibrator > Altek Model 942 Frequency Calibrator with Totalizer Manual

Altek Model 942 Frequency Calibrator with Totalizer Manual

Add to Favourites
    Download as PDF

    View the Altek Model 942 Frequency Calibrator with Totalizer Manual for free. All the Altek manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Frequency Calibrator with Totalizer Model 942 ¥ 0.001% accuracyLocked to high stability crystal ¥ Six real world ranges1 to 20000 counts-per-hour 0.1 to 2000.0 counts-per-minute 0.01 to 999.99 Hz 0.1 to 9999.9 Hz 0.001 to 99.999 kHz 0.01 to 250.00 kHz ¥ Calibrate totalizers and batch systemsOutput an adjustable number of pulses Incremental counter totalizes ¥ ÒQuik-Chek¨ Ó switchStore 18 values for instant recall Three memories for each range ¥ Three output waveformsSine waves, zero crossing Square...
    Page 2 General instructions Turn-onEach time the Model 942 is turned on, the LCD will display all segments for about 1 second. It then displays the currently selected waveform (Source Mode) for approximately 3 seconds. 1) Move the power switch to SOURCE or READ. Allsegments on the LCD are turned on during self test. 2) (SOURCE MODE ONLY) The display will indicate the selected waveform for 3 seconds. Repeatedly press or press and hold the SCROLL/STORE pushbutton to change to the desired waveform. 3) (SOURCE...
    Page 3 Frequency output Source1) Move the POWER switch to SOURCE 2) Move the mode switch to RANGE and repeated-ly press or press and hold the SCROLL/STORE pushbutton to change to the desired frequency range. Return the mode switch to FREQ. 3) Move the mode switch to LEVEL (AMPLITUDE) and turn the Digipot (Knob) until the logrithmic bargraph on the display reaches the desired level.Return the mode switch to FREQ. 4) Connect the Model 942 to the input terminals of the instrument or meter to be calibrated 5)...
    Page 4 Calibrate totalizers (output pulses)1) Move the POWER switch to SOURCE 2) Move the mode switch to RANGE and repeated-ly press or press and hold the SCROLL pushbutton until the word TOTAL appears on the LCD. The ouput waveform will automatically change to a zero based square wave. Return the mode switch to FREQ. 3) Move the mode switch to LEVEL (AMPLITUDE) and turn the Digipot (Knob) until the logrithmic bargraph on the display reaches the desired level. Return the mode switch to FREQ. 4) Move the...
    Start reading Altek Model 942 Frequency Calibrator with Totalizer Manual

    Related Manuals for Altek Model 942 Frequency Calibrator with Totalizer Manual

    All Altek manuals