Alpha Tool.Com.HK Limited Polisher AIR300 User Manual
Here you can view all the pages of manual Alpha Tool.Com.HK Limited Polisher AIR300 User Manual. The Alpha Tool.Com.HK Limited manuals for Polisher are available online for free. You can easily download all the documents as PDF.
Page 11
11 ALPHA® AIR-300 MINI AIR POLISHER PARTS LIST DRAWING NO. PART NO. DESCRIPTION QUANTITY 1 300001 Water-Feed Assembly 1 2 300002 Screw M4X10 3 3 300003 Oil Seal 1 4 300004 Body 1 5 300005 Screw M4X6 2 6 300006 Needle Bearing FJ810W 1 7 300007 Snap Ring S-10 1 8 300008 Spiral Bevel Gear 1 9 300009 Ball Bearing 6201ZZ 1 10 300010 Spindle 5/8”-11 1 11 300011 Oval Key 3X3X10 1 12 300012 O Ring KS-1 1 13 300013 Nozzle 5/16 1 14 300014 Oil Seal OS20264 1 15 300015 Nut M34 Left Hand 1 16 300016 Spiral...
Page 12
12 ALPHA® AIR-300 MINI AIR POLISHER PARTS LIST DRAWING NO. PART NO. DESCRIPTION QUANTITY 38 300034 Needle Pin φ1.5x3.8 1 39 300035 Valve Lever 1 40 300036 Screw M4X6 1 41 300037 Silencer 1 42 300038 Hose Fitting φ8 2 43 300039 Air Hose 8DX6d 10ft (3m) 1 44 300040 Hose Band 1 45 300041 Exhaust Hose (leather) 1 46 300042 Water Valve 1 47 300043 Hose Insert 1 48 300044 Union Nut 1 49 133229 Water Hose 8mm ODx10ft (3m) 1 50 AWP-56 Compression Ring Plastic 1 51 AWP-57 Compression Nut 1 52 AWP-74...
Page 13
13 Remove the vent screw from the ventilation hole. The ventilation hole is located near the water pipe as shown above. 2. Test the jiffy luber to make sure grease is coming out. Insert jiffy luber needle tip into fi ller hole and pump two or three times to inject grease into the tool housing. 3. Reinstall fi ller screw, then reconnect the tool to air making sure air valve is in the OFF position. Turn on tool for 4-5 seconds to remove excess grease. 4. Reinstall vent screw and clean grease...
Page 14
14
All the accessories can be purchased at a local distributor in
your area.
The Alpha® AIR-300 accepts 3” and 4” discs along
with 2”, 3” and 4” rubber pads. It requires a 3HP compressor
with air consumption of 10 CFM and air pressure between
85–95 PSI that makes on-site applications possible.
For
more information concerning Alpha
® Air Polisher and factory
service, please contact Alpha
®.
COMPANY HEADQUARTERS: Alpha Professional Tools®
103 Bauer Drive
Oakland, NJ 07436
Hours of...
Page 15
15 PRODUCT REGISTRATION CARD Model No. Serial No. Company Name: ______________________________________________ Name: ______________________________________________________ Address: ____________________________________________________ City: _______________________State: ________Zip: ________________ Telephone: ___________________________________________________ Purchase Date: _______________________________________________ Dealer’s Name: _________________________________ Note: Serial &...
Page 16
Copyright © 2010 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114 www.alpha-tools.com 01/2010