Home
>
Alpha Tool.Com.HK Limited
>
Cutting System
>
Alpha Tool.Com.HK Limited PeripheralTraverseSpeedChart Maintenance Card User Manual
Alpha Tool.Com.HK Limited PeripheralTraverseSpeedChart Maintenance Card User Manual
Have a look at the manual Alpha Tool.Com.HK Limited PeripheralTraverseSpeedChart Maintenance Card User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
800-648-7229 ● www.alpha-tools.com
m/sec.252627282930313233343536373839404142
Diameter
Ø250mm - 101,9101,9872,0642,1402,2172,2932,3692,4462,5222,5992,6752,7522,8282,9042,9813,0573,1343,210
Ø300mm - 121,5921,6561,7201,7831,8471,9111,9752,0382,1022,1662,2292,2932,3572,4202,4842,5482,6112,675
Ø350mm - 141,3651,4191,4741,5291,5831,6381,6921,7471,8021,8561,9111,9652,0202,0752,1292,1842,2382,293
Ø400mm - 161,1941,2421,2901,3381,3851,4331,4811,5291,5761,6241,6721,7201,7681,8151,8631,9111,9592,006
Ø450mm - 181,0621,1041,1461,1891,2311,2741,3161,3591,4011,4441,4861,5291,5711,6141,6561,6991,7411,783
Ø500mm - 209559941,0321,0701,1081,1461,1851,2231,2611,2991,3381,3761,4141,4521,4901,5291,5671,605
m/sec.434445464748495051525354555657585960
Diameter
Ø250mm - 103,2843,3633,4393,5163,5923,6693,7453,8223,8983,9754,0514,1274,2044,2804,3574,4334,5104,586
Ø300mm - 122,7392,8032,8662,9302,9943,0573,1213,1853,2483,3123,3763,4393,5033,5673,6313,6943,7583,822
Ø350mm - 142,3482,4022,4572,5112,5662,6212,6752,7302,7842,8392,8942,9483,0033,0573,1123,1673,2213,276
Ø400mm - 162,0542,1022,1502,1972,2452,2932,3412,3892,4362,4842,5322,5802,6272,6752,7232,7712,8182,866
Ø450mm - 181,8261,8681,9111,9531,9962,0382,0812,1232,1662,2082,2512,2932,3352,3782,4202,4632,5052,548
Ø500mm - 201,6431,6821,7201,7581,7961,8341,8731,9111,9491,9872,0252,0642,1022,1402,1782,2172,2552,293
Standard Single Speed RPM = 1,400 or 1,800
Material Classm/sec.ft/sec.MetersInchesMetersInchesMetersInches
Eng.Stone/Quartz Surface32~35105~1155.01973.01182.079
Granite Class 132~35105~1155.01973.01182.079
Granite Class 232~35105~1154.21642.5981.766
Granite Class 328~3592~1153.31312.0791.352
Granite Class 428~3292~1052.5981.5591.039
Granite Class 525~2882~921.7661.0390.726
Quartzite*25~2882~921.7661.0390.726
Crystallized Glass**32~45105~1501.7661.0400.725
Porcelain/Sintered Slab**32~45105~1501.7661.0400.725
White Crystalline Marble 50~55165~18020.882012.5492If variable speed control is available…
Colored Marble45~50150~16516.765610394
Travertine (Soft)45~50150~16516.765610394
Travertine (Hard)50~60160~20025.098415591
Sandstone50~60160~20029.2114817.5689
For Miter Cuts, Reduce Traverse Speed by 50%
Slab Thickness-Maximum Linear Traverse Speed
Workable Peripheral Speed Range
Spindle RPM for Recommended Peripheral Speed by m/sec. for Alpha® Silencer III and ICE Blades
1.2cm2cm3cm
*Alpha® recommends using the lower end of the
range for better results.
**Alpha® recommends using the higher end of the
range for better results.
2/10/2016 (Peripheral-TraverseSpeedChart2015-v3.xlsx)