Home
>
Alpha Tool.Com.HK Limited
>
Ecoguard
>
Alpha Tool.Com.HK Limited Ecoguard Type W5 User Manual
Alpha Tool.Com.HK Limited Ecoguard Type W5 User Manual
Have a look at the manual Alpha Tool.Com.HK Limited Ecoguard Type W5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 7
7
INsTalla TION Of ThE DusT COllECTION COVER
WARNING!
1. Be sure to turn off the high-speed angle grinder and remove the plug from
the electrical outlet before attaching and installing the Dust Collection Cover.
2. Make sure the Dust Collection Cover is securely attached; otherwise it m\
ay
come loose which could cause injury.
3. If you installed the Dust Collection Cover to a high-speed angle grinder but
the connector is loose and can not be securely attached, do not use the Dust
Collection...](http://img.usermanuals.tech/thumb/326/5200/w64_ecoguard-type-w5-user-manual-1478735701_d-6.png "Page 7
7
INsTalla TION Of ThE DusT COllECTION COVER
WARNING!
1. Be sure to turn off the high-speed angle grinder and remove the plug from
the electrical outlet before attaching and installing the Dust Collection Cover.
2. Make sure the Dust Collection Cover is securely attached; otherwise it m\
ay
come loose which could cause injury.
3. If you installed the Dust Collection Cover to a high-speed angle grinder but
the connector is loose and can not be securely attached, do not use the Dust
Collection...")
![Page 8
8
INsTallING TO OThER hIGh-sPEED aNGlE
GRINDERs WITh INCluDED CONNECTORs
If you install the Dust Collection Cover to a high-speed angle grinder but the con-
nector is loose and cannot be securely attached, it may be necessary to \
change
the connector which is designed for other manufacturers angle grinders.
1. Using the hexagon wrench, remove the three flat head screws in the connector
attached to the Dust Collection Cover. (Fig. 3)
2. Attach the supplied connector by following the instruction in...](http://img.usermanuals.tech/thumb/326/5200/w64_ecoguard-type-w5-user-manual-1478735701_d-7.png "Page 8
8
INsTallING TO OThER hIGh-sPEED aNGlE
GRINDERs WITh INCluDED CONNECTORs
If you install the Dust Collection Cover to a high-speed angle grinder but the con-
nector is loose and cannot be securely attached, it may be necessary to \
change
the connector which is designed for other manufacturers angle grinders.
1. Using the hexagon wrench, remove the three flat head screws in the connector
attached to the Dust Collection Cover. (Fig. 3)
2. Attach the supplied connector by following the instruction in...")
![Page 11
11
(Fig.7)
(Fig.8)
(Fig.9)
aDjusTING ThE CuTTING DEPTh
1. Loosen knob (B) on the Dust Collection Cover. (Fig. 7)
2. Slide the base plate to adjust the cutting depth and tighten knob (B) to fix the
depth. (Fig. 8) Match the base plate matching surface to the scale to\
determine
the approximate cutting depth. (Fig. 9)
3. Use D115 scale for 4.5” (115mm)
diameter blade and D125 scale for
5” (125mm) diameter blade. Cutting
depth is indicated by millimeter.
Matching Surface
Scale
Knob (B)
Base...](http://img.usermanuals.tech/thumb/326/5200/w64_ecoguard-type-w5-user-manual-1478735701_d-10.png "Page 11
11
(Fig.7)
(Fig.8)
(Fig.9)
aDjusTING ThE CuTTING DEPTh
1. Loosen knob (B) on the Dust Collection Cover. (Fig. 7)
2. Slide the base plate to adjust the cutting depth and tighten knob (B) to fix the
depth. (Fig. 8) Match the base plate matching surface to the scale to\
determine
the approximate cutting depth. (Fig. 9)
3. Use D115 scale for 4.5” (115mm)
diameter blade and D125 scale for
5” (125mm) diameter blade. Cutting
depth is indicated by millimeter.
Matching Surface
Scale
Knob (B)
Base...")
11 (Fig.7) (Fig.8) (Fig.9) aDjusTING ThE CuTTING DEPTh 1. Loosen knob (B) on the Dust Collection Cover. (Fig. 7) 2. Slide the base plate to adjust the cutting depth and tighten knob (B) to fix the depth. (Fig. 8) Match the base plate matching surface to the scale to\ determine the approximate cutting depth. (Fig. 9) 3. Use D115 scale for 4.5” (115mm) diameter blade and D125 scale for 5” (125mm) diameter blade. Cutting depth is indicated by millimeter. Matching Surface Scale Knob (B) Base Plate
12 aTT aChING TO ThE DusT COllECTOR hOsE Attach the Dust Collection Cover to the hose. (Fig. 10) *The hose opening of the Dust Collection Cover has an outside diameter of 34mm. If necessary, use the Rubber Hose Adapter and Stainless Hose Band supplied with the Dust Collection Cover. (Fig.10) Dust Connector Hose Stainless Steel Hose BandRubber Hose Adapter
13 aTT aChabl E GRINDERs fOR ECOG uaRD W5 bRaND HITACHI ® DEWALT ® FLEX ® MILWAUKEE ® MAKITA ® BOSCH ® METABO ® PaRT NO. 500070500072500071 500002 500027 CONNECTORs (Factory Preset) COllaR N/A sP aCER N/AT7.0 500013 T5.0 500012 T9.4 500014 T8.6 500023 T4.0 500047 G12SA3 G12E2 G12SE2P9 G12SVA G12SR3 G12SS G13SC2 G13SC2P9 G13SPG13VA DWE4011 DWE4120(N) L3410VRG 6130 6140 6146 6147 6121 6117 6121 6124 6161 GA4030(K) GA4530 GA4534 GA5010Z GA5020(Y) 9554NB 9557NB/PB 9558PB9564 9565CV/PC 9566CV BGA451(Z) BGA452(Z) 1830 Slim AG40 Series AG50 Series 1801 1803EVS 1821(D) 1800 1810PS(D) W8-115(Q) W8-125(Q) W11-125(Q) WA11-125(Q) WE9-125(Q) WE14-125(P) WE14-125 VS WP8-125 WP11-125 WEPA14-125 W11-150 WE14-150 WEP14-150 WEPA14-150 WP11-150
15 alPha® ECOGuaRD TyPE W5 PaRTs lIsT DRAWING NO.PART NO. DESCRIPTION QUANTITY 1 500069 Ecoguard W5 Assembly 1 2a 500002Connector Assembly (Makita ® / Milwaukee® / Bosch®)1 2b 500070Connector Assembly (Hitachi ®) 1 2c 500071Connector Assembly (Flex ®) 1 2d 500072Connector Assembly (Dewalt ®) 1 2e 500027Connector Assembly (Bosch ® / Metabo®) 1 3 500020 Flat Head Screw 3 4 500021 Taper Washer 3 5 500029 Base Flange 1 6a 500047Spacer (T4.0) 1 6b 500012Spacer (T5.0) 1 6c 500013Spacer (T7.0) 1 6d 500023Spacer (T8.6) 1 6e 500014Spacer (T9.4) 1 7 500022 Collar-M 1 8 500005 Rubber Hose Adapter 1 9 500006 Stainless Steel Hose Band 1 10 500024Hex. Wrench 1 Optional Accessory: Shown on pg 4 500026Flexible Connector Hose 18” 1
Copyright © 2015 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com 10/2015