Home > Alpha Tool.Com.HK Limited > Ecoguard > Alpha Tool.Com.HK Limited Ecoguard Type W User Manual

Alpha Tool.Com.HK Limited Ecoguard Type W User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Alpha Tool.Com.HK Limited Ecoguard Type W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 16
    Add page 11 to Favourites
    image text
    Enable zoom 
    							11
 MOuNTING ThE DIaMOND WhEEl
1.  loosen the Dust Collection Cover Knob (a). (fig. 4)
2.  Slide the Dust Collection Cover open. (fig.5)
(fig.5)
(fig.4)
Knob (a)
lock Pin
    Add page 12 to Favourites
    image text
    Enable zoom 
    							12
3. Mount  the  supplied  spacer  with  the  power  tool  or  dedicated  flange  lock 
nut set on the spindle and then mount the diamond wheel. (fig. 6)
4.  Mount  the  inner  flange  on  the  spindle  on  top  of  the  diamond  wheel  with 
the convex side of the inner flange on the diamond wheel side. 
5.  Press  the  lock  pin  to  fix  the  spindle  and  securely  tighten  the  lock  nut 
with a pin wrench.
6.  Replace the Dust Collection Cover (fig. 4) and tighten the knob (a).
 aDjuSTING  ThE CuTTING DEPTh
1.  loosen knob (b) on the Dust Col-
lection Cover. (fig. 7)
2.  Slide the base plate to adjust the 
cutting depth and tighten knob 
(B)  to  fix  the  depth.  (Fig.  8)    Match 
the base plate matching surface 
to the scale to determine the ap -
proximate cutting depth. (fig. 9)  
Spacer:
hitachi:  500011
Metabo
®:  500012
(fig.7)
(fig.8)
(fig.6)
lock Nut
Diamond
Wheel
Inner
flange
Knob (b)base Plate
    Add page 13 to Favourites
    image text
    Enable zoom 
    							13
 aTT aChING ThE DuST COllECTOR
attach the Dust Collection Cover to the hose. (fig. 10)
*The hose opening of the Dust Collection Cover has an outside diameter of 
34mm. 
If necessary, use the Rubber hose  adapter and Stainless hose band supplied with 
the Dust Collection Cover. 
(fig.9)
(fig.10)
 
3.  use D115 scale for 4.5” (115mm) 
diameter blade and D125 scale 
for 5” (125mm) diameter blade.  
Cutting depth is indicated by 
millimeter.
Dust Connector hose
Stainless Steel hose bandRubber  hose adapter
Matching Surface
Scale
    Add page 14 to Favourites
    image text
    Enable zoom 
    							14
   alPha® ECOGuaRD TyPE W SChEMa TIC
    Add page 15 to Favourites
    image text
    Enable zoom 
    							15
   alPha® ECOGuaRD TyPE W P aRTS lIST
DRaWING NO. PaRT NO. DESCRIPTION QuaNTITy
1 500027 Cover assembly 1
2 500009 base 1
3 500010 base Plate 1
4a 500002 Connector assembly (alpha
®/Makita®/ 
Milwaukee) 1
4b 500003 Connector assembly (hitachi) 1
4c 500004 Connector assembly (Metabo
®) 1
4d 500027 Connector assembly (bosch
®/Dewalt) 1
5 500005 Rubber hose adapter 1
6 500006 Stainless Steel hose band 1
7 500007 Inner flange 1
8 500008 lock Nut 1
9e 500011 Spacer (hitachi/T2.5) 1
9f 500012 Spacer (Metabo
®/T5.0) 1
10 500015 Knob bolt 2
11 500016 Shaft 1
12 500017 Screw 2
13 500018 Spring Washer 4
14 500019 Washer 3
15 500020 flat head Screw 3
16 500021 Taper Washer 3
17 500025 brand label 1
18 500022 Collar - M  1
19 500024 hex. Wrench 1
20 210105 Pin Wrench 1
21 500035 Collar D 1
Optional accessory:
Shown on pg 4 500026flexible Connector hose  18” 1
    Add page 16 to Favourites
    image text
    Enable zoom 
    							Copyright © 20102Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
08/2012
    All Alpha Tool.Com.HK Limited manuals Comments (0)

    Related Manuals for Alpha Tool.Com.HK Limited Ecoguard Type W User Manual