Alpha Tool.Com.HK Limited Ecoguard Type G ver 1 User Manual

							11
GRINDING APPLICATIONS
 SURFACE GRINDING
 
Securely connect the Flexible Connector Hose to the Dust Collection Cover.  Turn 
Grinder and Vacuum on to start grinding application.
Use the Alpha
® Rubber Hose Connector as a joint between duct and Flexible Connector 
Hose.
 WALL GRINDING
Loosen the screws and remove the 
Sub Cover and Half Cover. 1.
Rubber Hose Connector
Duct Flexible Connector Hose
Half CoverScrew M4 x 10
Sub Cover
Stainless Steel Hose Band 
						

							12
Switch the position of the Sub Cover and Half Cover.
Tighten screws.
ATTACHING THE DUST COLLECTOR
Securely connect Flexible Connector Hose to the duct of the grinder, then turn 
Grinder and Vacuum Cleaner on to start grinding application.
Use an adapter such as the Alpha
® Rubber Hose Connector as a joint between 
the duct and the Flexible Hose Connector. 2.
3.
1.
2.
Rubber Hose ConnectorDuct
Stainless Steel Hose Band Half CoverSub Cover 
						

							13
ALPHA® ECOGUARD TYPE G SCHEMATIC
ALPHA® / MAKITA®
CONNECTOR, SPACERS
AND FLANGE / LOCK NUT
*Original indicates Lock Nut included with tool. 
						

							14
*Original indicates Lock Nut included with Tool.    # 11-a,b,c,d - Choose spacer according to Cup Type. (See chart on page 10)
ECOGUARD TYPE G OTHER CONNECTORS AND SPACERS 
						

							15
ALPHA® ECOGUARD TYPE G PARTS LIST
DRAWING NO. PART NO. DESCRIPTION QUANTITY
1500032Main Cover 1
2 500033 Sub Cover 1
3 500034 Half Cover 1
4 500005 Rubber Hose Adapter 1
5 500006 Stainless Steel Hose Band 1
6 500037 Screw M4x10 4
7 500038 Set Plate 1
8 500039 Holder Spring 4
9 500020 Flat Head Screw M4x5 3
10a 500028 Connector Assembly (Alpha
®/Makita®)1
10b 500003 Connector Assembly (Hitachi) 1
10c 500004 Connector Assembly (Metabo
®/Bosch /Dewalt) 1
11a 500011 Spacer / T2.5  1
11b 500012 Spacer / T5.0 1
11c 500013 Spacer / T7.0 1
11d 500014 Spacer / T9.4  1
12a 500029 Base Flange  1
12b500007Inner Flange 1
13 500022
Collar M (Metabo)1
14 500035 Collar D (Dewalt) 1
16 500008 Lock Nut  1
17 500024 Hex. Wrench 1
18 210105 Pin Wrench 1
19 500036 Seal 1
20 500040 Brand Label 1
21 500041 Brush (A) 1
22 500042 Brush (B) 1
23 500021 Taper Washer 3
Optional Accessory:
Shown on pg 4 500026 Flexible Connector Hose  18” 1 
						

							Copyright © 2010 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114
www.alpha-tools.com
10/2010