AllTrade SO PressureWasher IM 870617 User Manual

COMPONENT 691699 
ITM./ART. 476052
FOR CUSTOMER SERVICE1-888-278-8092
Printed in China
3021528
Conforms to Std. UL 1776
Certified to CAN/CSA-C22.2
STD No.68-92
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND 
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A...

INTRODUCTION
This instruction manual is intended for your benefit. Please read and follow the safe-
ty, installation, maintenance and troubleshooting steps described within to ensure
your safety and satisfaction. The contents of this instruction manual are based upon
the latest product information available at the time of publication. The manufactur-
er reserves the right to make product changes at any time without notice.
GENERAL SAFETY
READ AND FOLLOW ALL INSTRUCTIONS.
Failure to follow all...

IMPORTANT INFORMATION ABOUT THIS MANUAL
Improper and unsafe use of this Pressure Washer can
result in death, fire and/or bodily injury. This instruction manual contains
important information about product safety. Keep the instruction manual
available for others  to read before they use the Pressure Washer.
Improper maintenance and operation are responsible for the majority of accidents
involving Pressure Washers. The largest portion of these could be prevented by rec-
ognizing the basic safety rules and...

Always make sure the tool is in the OFF position when making adjustments,
changing parts, or performing any maintenance. 
Service must be performed only by qualified repair personnel.Service or
maintenance by unqualified personnel may result in a risk of injury.
Do not use the tool if the power switch does not turn it “ON” or “OFF”.A tool that
cannot be controlled with the switch is dangerous and must be repaired.
Store all maintenance tools away from the immediate area before turning ON
the tool.
Do not...

NEVERcut or splice the power cord or extension cords.
DO NOTspray electrical apparatus and wiring.
WEAR rubber-soled tennis shoesor other footwear that provides some insula-
tion when operating the Pressure Washer.
COLDwater use only.
FOR EITHER INDOOR OR OUTDOOR USE. Store indoors.
DO NOTdirect spray toward electrical outlets, switches or products
connected to electrical service. Failure to observe this warning can
result in electrocution resulting in severe electrical shock or burns
and possibly...

EXTENSION CORD USAGE
Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole
cord connectors that accept the plug from the product. Use only extension cords that
are intended for outdoor use. These extension cords are identified by a marking
“Acceptable for use with outdoor appliances; store indoors while not in use.” Use only
extension cords having an electrical rating not less than the rating of the product. Do
not use damaged extension cords. Examine extension cord before...

ASSEMBLY & SETUP
This Pressure Washer requires some assembly. If you have any problems with the
assembly of your Pressure Washer, please call the Pressure Washer helpline at 
1-888-278-8092. If calling for assistance, please have the model, revision, and seri-
al number from the data tag available.
1. Using a box cutter, cut open the Pressure Washer carton on top.
2. Carefully remove all items from the box and inspect for completeness (see
Functional Description).
WAND / GUN CONNECTION
Insert the wand...

OPERATING THE PRESSURE WASHER
ALWAYS wear approved safety glasses when operating Pressure
Washers. Spray can splash back or propel objects, including 
incorrectly attached accessories.
The high pressure stream of water that this equipment produces can cut
through skin and its underlying tissues, leading to possible amputation.
Spray gun traps high water pressure, even when the motor
is stopped and water is disconnected, which can cause injury.
Kickback from spray gun can cause you to fall.
1. For your...

•  If you get spray nozzle too close, especially using high pressure mode, you may
damage surface being cleaned.
• DO NOTget closer than 6 inches when cleaning tires.
SHUTTING DOWN THE PRESSURE WASHER
The Pressure Washer motor runs only when the trigger is engaged. To shut off the 
Pressure Washer:
1. Release spray gun trigger.
2. Move units ON/OFF switch to OFF position.
IMPORTANT:Releasing the trigger will shut off the motor but does not shut off elec-
trical power to the unit.
3. Turn off water...

Some adjustments will need to be made periodically to properly maintain the Pressure
Washer. All service and adjustments should be made at least one time each season. It
is important that the maintenance chart below be followed.
MOVING AND STORAGE 
After each application or winter storage follow these instructions:
1. When finished using the Pressure Washer, you must first drain and rinse the
detergent tank.
2. Run the Pressure Washer in low pressure until all of the soap is drained from
the detergent...