AllTrade Kawasaki Portable Jumpstarter Compressor 840095 User Manual
Here you can view all the pages of manual AllTrade Kawasaki Portable Jumpstarter Compressor 840095 User Manual. The AllTrade manuals for Compressor are available online for free. You can easily download all the documents as PDF.
Page 1
RECHARGEABLE JUMPSTARTER INSTRUCTION MANUAL MANUEL D’UTILISATION DE SYSTÈME DE DÉMARRAGE RECHARGEABLEMANUAL DE INSTRUCCIONES PARA EL SISTEMA DE ARRANQUE ASISTIDO 87-1904-60957 KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUF ACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: KAWASAKI™ EST UNE MARQUE DE COMMERCE DE KAWASAKI™ MOTORS CORP ., U.S.A., QUI NE FABRIQUE PAS ET NE DISTRIBUE PAS CE PRODUIT THIS...
Page 2
CONGRA TULA TIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Ser vice. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for , this tool will give you many years of satisfaction. Congratulations on pur chasing the Combined Jumpstart, Air Compressor and 12V Power Supply...
Page 3
IMPOR TANT SAFETY RULES FOR JUMPST AR TERS Read and understand all instructions, safety warnings, and warning labels before attempting to use this jump-starter . Misuse can lead to risk of fire, electric shock or personal injur y. Lead-acid batteries generate explosive gases. Accidental ignition by spark, cigarette or flame could lead to explosion or fire. 1. NEVER expose this product to rain, snow , ocean spray or any other damp environments. Never...
Page 4
SYMBOLS IMPOR TANT : Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer . SYMBOL NAME EXPLANA TION V Volts Voltage (Potential) A Amperes Current Hz Hertz Frequency (Cycles per Second) W Watt Power Kg Kilograms Weight Alternating Current Type of Current Direct Current Type of Current Alternating or Direct Current Type of...
Page 5
CHARGING THE BA TTER Y INITIAL CHARGE: The Jumpstart System does not leave the factor y fully charged. Before use, attach the unit to the 120V AC charger for 48 hours. The green LED charge indicator will show when the batter y has reached full charge. To view the charge level, press the Charge Status button. RECHARGE:The batter y can be recharged using either AC or DC current. Cables are provided for both sour ces of power . We recommend using...
Page 6
FUNCTIONAL DESCRIPTION CONTROLS AND COMPONENTS: 1. On/Off Jumpstart Switch 2. Analog Pressure Gauge 3. Automotive Adapter 4. 12 Volt DC Accessor y Outlet 5. Batter y Charge Level Button 6. Batter y Level Indicators 7. Work Light On/Off Switch 8. Work Light 9. Negative (Black) Jumper Cable and clamp 9 10 DC ADAPTER: To charge the jump-starter from a boat or car accessor y receptacle, plug one end of the included DC adapter into the receptacle and the...
Page 7
OPERA TING THE JUMPST AR TER Before attempting to jumpstart any vehicle, read and understand all safety warnings and instructions in this manual. Jumpstarting a vehicle can be dangerous. Take all precautions recommended in this manual. 1.ALWAYS wear eye protection when working with batteries. If batter y acid splashes into your eyes, flush immediately with cold running water . Continue flushing for at least 15-20 minutes, then seek immediate medical...
Page 8
USING THE AIR COMPRESSOR TIRE INFLA TION 1.Open the small compartment on the rear of the unit and pull out the air hose. 2.Push the connector onto the tire’ s valve stem as far as possible and press the thumb lock to hold it in place. 3.Turn on compressor . 4.Watch the pressure gauge. Be careful not to over -inflate the tire. 5.When the proper air pressure is reached, turn off the compressor . 6.Open the thumb lock and pull the connector...
Page 9
ACCESSORIES Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets. If you must use an extension cord, be sure that the gauge is large enough to carr y the amount of current necessar y for your power tool. If not, your tool may experi- ence a loss of...
Page 10
found to be defective and subject to warranty . Alltrade retains the sole discretion to determine whether any item or part is nonconforming and, if so, whether the item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or...