AllTrade Kawasaki Cordless Reciprocating Saw 840057 User Manual
Have a look at the manual AllTrade Kawasaki Cordless Reciprocating Saw 840057 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi-Purpose Tools Wide Range of Accessories and more. 20 RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLSTOOL CURRENT RATING CONDUCTOR SIZE IN A.W.G AMPERE 10FT. 25FT. 50FT. 100FT. 3-6 18 18 18 186-8 18 18 18 168-10 18 18 18 1410-12 16 16 14 1412-16 14 12 12 -16-20 12 12 12 - SPECIFICATIONS SPECIFICATIONS Voltage 19.2V Length of Stroke 22mm (7/8)Switch Variable Speed with BrakeCharger Input 120V 60HzCharging Time Approx. 3-5 hoursNo Load Speed (RPM) 0-2600/minBattery Type Ni-Cad PROTECTING THE ENVIRONMENT BATTERIES Alltrade batteries can be recharged many times. At the end of their useful life, recy- cle batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly. 19
item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period. Typically, a defective product that is returned within the first 30 days after the purchase date will be replaced; for items returned after the first 30 days and within the warranty period, covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi- ble for the return shipping charges. Alltrade’s repair and/or replacement of any non- conforming item and/or part thereof shall constitute fulfillment of all obligations to the purchaser. Alltrade shall not be responsible or liable for any expense, including freight charges, or repairs made outside Alltrade’s facility, unless expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or rental, inconvenience, commercial loss or consequential damages. Exclusions This warranty does not cover parts damaged due to normal wear, abnormal conditions, misapplication, misuse, abuse, accidents, operation at other than recommended pressures or temperatures, improper storage or freight damage. Parts damaged or worn by operation in dusty environments are not warranted. Failure to follow recommended operating and maintenance procedures also voids warranty. This limited warranty does not apply to accessory items such as drill bits, screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding sheets and other related items. DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE, NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY. Alltrade will not be liable for the following: labor charges, loss or damage resulting from improper operation, maintenance or repairs made by other persons; pre-delivery services such as assembly, oil or lubricants, and adjustment; maintenance services that are normally required to maintain the product. The use of other than genuine Alltrade Repair Parts will void warranty. 22 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail purchaser of the accompanying KAWASAKI™ portable power tool and no one else all parts of the product (except those parts referred to below which are specifically excluded from such warranty (see Exclusions)) to be free from defects in materials and workmanship for a period of two years from original date of purchase. SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS:This Kawasaki™ portable power tool is offered as a home use tool and carries a HOME USE WARRANTY. This tool is made for home use in the execution of projects and repairs in and around the home. Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITEis not covered under this warranty. The date of purchase shall be the date of shipment to the original purchaser, or the date the original purchaser took possession, custody or control of the product, whichever occurred first. This warranty shall be null and void if the product or any component thereof is modified, altered or used for any commercial purpose or on a jobsite. This warranty does not apply to any other product and/or component thereof manufactured or distributed by Alltrade, and does not apply to products and/or components thereof designed, manufactured and/or assembled by others, for which Alltrade makes no warranties whatsoever.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Warranty Performance By purchasing the product, purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and/or part is promptly returned to Alltrade’s facility postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair, 1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723) within the applicable warranty period, with a written request by purchaser that Alltrade repair and/or replace the nonconforming item and/or part. We recommend that you keep the original product packaging in the event you need to ship the unit. We suggest the package be insured against loss or in transit damage. When sending your product include your name, address, phone number, dated proof of purchase (or copy), and a statement about the nature of problem. Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date. Parts returned, freight prepaid and insured, to Alltrade’s facility (see above address) will be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if found to be defective and subject to warranty. Alltrade retains the sole discretion to determine whether any item or part is nonconforming and, if so, whether the 21
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE. Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages, so part or all of the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If your product is not covered by this warranty, please call our Customer Service Department toll free at 1-800-590-3723 for general repair information and charges. 24 Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE. EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE. Limitation Of Liability IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS 23
LLI R D DET A REP O-Y RETT A B DEEPS-2 V2.91 LAUNAM NOITCURTSNI ECIVRES REMOTSUC ROF ETNEV SÉRPA ECIVRES EL RUOP RUETAMMOSNOC UD UO OICIVRES LE ARAP RODIMUSNOC LE ARAP 3273-095-008-1 anihC ni detnirP 75906-4091-78 ,.PROC SROTOM ™IKASAWAK YB DESNECIL KRAMEDART A SI ™IKASAWAK .TCUDORP SIHT ETUBIRTSID RO ERUTCAFUNAM TON SEOD HCIHW ,.A.S.U :OT DETCERID EB DLUOHS SERIUQNI REMUSNOC .CLL ,SLOOT EDARTLLA 6002 THGIRYPOC© ATALP AIV 1341 ASU 2641-01809 AC ,HCAEB GNOL 60/22/8 veR_llirD sseldroC kcalB V2.91 – 750048 ,NOITAREPO,YTEFAS GNIDRAGER NOITAMROFNI TNATROPMI SNIATNOC LAUNAM SIHT DNA YLLUFERAC DAER,ESU EROFEB.TCUDORP SIHT FO EGAROTS DNA ECNANETNIAM ERULIAF.SLEBAL TCUDORP DNA SNOITCURTSNI,SGNINRAW,SNOITUAC LLA DNATSREDNU .EGAMAD YTREPORP RO/DNA YRUJNI LANOSREP SUOIRES NI TLUSER DLUOC OS OD OT EDARTLLA RUOY HTIW MELBORP A ECNEIREPXE RO SNOITSEUQ YNA EVAH DLUOHS UOY FI REMOTSUC RUO LLAC ESAELP.EROTS EHT OT TCUDORP SIHT NRUTER TON OD,TCUDORP TA TNEMTRAPED ECIVRES 3273-095-008-1 GNIWOLLOF EHT EVAH,LLAC UOY EROFEB. NA.NOITACOL EROTS DNA DESAHCRUP ETAD,.ON LEDOM:ELBALIAVA NOITAMROFNI UOY FI.ENOHP EHT REVO MELBORP RUOY EVLOSER NAC EVITATNESERPER EDARTLLA :TA SU LIAME RO LLAC A SU EVIG,TNEMMOC RO NOITSEGGUS A EKAM OT EKIL DLUOW .SU OT LATIV SI KCABDEEF RUOY.MOC.SLOOTEDARTLLA@OFNI TNENOPMOC 750048#
SECTION FOUR MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 18 SECTION FIVE 2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22 CONGRATULATIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for, this tool will give you many years of satisfaction. INTENDED USE This tool is intended for consumer use only. Your charger and/or adapter has been designed for charging batteries of the type approved and supplied with this tool. GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS READ AND UNDERSTAND ALL INSTRUCTIONS.Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools. Always use common sense and pay particular attention to all the DANGER, WARNING, CAUTIONand NOTEstatements of this manual. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. TABLE OF CONTENTS CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SECTION ONE GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS . . 2 RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3 IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SECTION TWO SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . . 6 SAFETY RULES FOR CORDLESS DRILL/DRIVERS . . . . . . . . . . . . . 6-7 SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 SECTION THREE FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12 REMOVING / ATTACHING BATTERY PACK . . . . . . . . . . . . . . . . . . . 11 CHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 CHARGING BATTERY PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 INSTALLING DRILL BIT INTO KEYLESS CHUCK . . . . . . . . . . . . . . 12-13 OPERATING THE CORDLESS DRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-16 VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 13 FORWARD/REVERSE AND TRIGGER LOCK LEVER . . . . . . . . . . . . 14 TORQUE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 HIGH / LOW SPEED (GEAR) SHIFTING . . . . . . . . . . . . . . . . . . . . . . 15 SCREWDRIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DRILLING METAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DRILLING MASONRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DRILLING WOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 HINTS FOR OPTIMUM USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 1
DANGERindicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNINGindicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTIONindicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTIONused without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTEprovides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. IMPORTANT SAFEGUARDS People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. WARNING:Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. WARNING: Handling the power cord on corded products may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. WORK AREA Keep your work area clean and well lit.Cluttered work benches and dark work areas may cause accidents or injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY Do not abuse the cord. Never use the cord to carry the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately.Damaged cords may create a fire. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery.A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery operated tool only with specifically designatedbattery pack.Use of any other batteries may create risk of fire. 4
When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery termi- nals together may cause sparks, burns or a fire. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using.Many accidents are caused by poorly maintained tools. Use only accessories that are recommended by the manufacturer for your model.Accessories that may be suitable for one tool may create a risk of injury when used on another tool. SERVICE Tool service must be performed only by qualified repair personnel.Service or maintenance by unqualified personnel may result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when perform- ing an operation where the cutting tool may contact hidden wiring.Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator. SAFETY RULES FOR CORDLESS DRILL / DRIVERS Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust. Do not grasp the tool or place your hands too close to the spinning chuck or drill bit. Your hand may be lacerated or may cause injury. Secure the material being worked on. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injury. 6 PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication.A moment of inattention while operating power tools may result in serious personal injury. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts.Loose clothes, jewelry or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is in the locked or “OFF” position before inserting battery pack. Carrying power tools with your finger on the switch or inserting battery pack into a tool with the power switch “ON”invites accidents. Remove adjusting keys or wrenches before turning the tool “ON”.A wrench or a key that is left attached to a rotating part of the tool may result in person- al injury. Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enable better control of the tool in unexpected situations. Use safety equipment. Always wear eye protection. Dust mask, non-skid safe- ty shoes, hard hat, or hearing protection must be used for appropriate conditions.TOOL USE AND CARE Use clamps or other practical ways to secure and support the workpiece to a stable platform.Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application.The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool if the power switch does not turn it “ON” or “OFF”.A tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect battery pack from tool or place the switch in the locked or “OFF” posi- tion before making any adjustments, changing accessories, or storing the tool. Such preventative safety measures reduce the risk of starting the tool accidentally. Store idle tools out of reach of children and other untrained persons.Tools are dangerous in the hands of untrained users. 5
SYMBOLS IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION V Volts Voltage (Potential)A Amperes CurrentHz Hertz Frequency (Cycles per Second)W Watt PowerKg Kilograms Weight Alternating Current Type of CurrentDirect Current Type of CurrentAlternating or Direct Current Type of CurrentEarthing Terminal Grounding TerminalClass II Construction Denotes Double Insulation min Minutes Times Seconds Time Diameter Size of Drill Bits, Grinding Wheels, etc. No load speed No-load Rotational Speed .../min Revolutions per Minute Revolutions, Surface Speed, Strokes, etc. per Minute 1,2,3, … Ring Selector Settings Speed, Torque or Position Settings 8 Position yourself to avoid being caught between the tool or side handle and walls or posts.Should the socket or bit become bound in the work, the reac- tion torque of the tool could crush your hand or leg. Check to see that keys and adjusting wrenches are removed from the Cordless Drill before switching the tool “ON”.Keys or wrenches can fly away at high velocity striking you or a bystander. When using the Cordless Drill, always maintain a firm grip on the tool with both hands. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring.Contact with a live wire will also make exposed metal parts of the tool live and shock the operator. Keep the handle of the Cordless Drill dry, clean, and free from oil and grease. Do not run the Cordless Drill while carrying it at your side.A spinning socket or bit could become entangled with clothing and injury may result. Disconnect the plug or remove the battery pack from tool and place the switch in the locked or “OFF” position before making any assembly adjustments, changing accessories, performing any inspection, maintenance or cleaning procedures. Such preventive safety measures reduce the risk of starting the tool accidentally. Do not use the Cordless Drill if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid. Maintain labels and nameplates on the Cordless Drill.These carry important information. If unreadable or missing, contact Alltrade for a replacement.
FUNCTIONAL DESCRIPTION CONTROLS AND COMPONENTS: 1. Battery Pack 2. Release Buttons on Each Side 3. 120V AC Adapter 4. Charger 5. LED Charging Indicators 6. 10mm (3/8) Keyless Chuck 7. 24+1 Adjustable Torque Settings Control Ring 8. Forward/Reversing and Trigger Lock Lever COMPONENT MODEL NUMBERBATTERY PACK 690071120V AC ADAPTER 690074CHARGER 69007210mm (3/8) KEYLESS CHUCK690076 9 BATTERY Before using battery pack, please read carefully all instruc- tions and cautionarymarkings on battery pack, battery charger and product using battery. Do not incinerate the battery pack even if it is severely dam- aged or is completely worn out.The battery pack can explode. Do not carry battery packs in aprons, pockets, or tool boxes, product kit boxes, drawers, etc. with loose metal objects.Battery pack terminals could be short circuited causing damage to the battery pack, severe burns or fire. The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic material by the Environmental Protection Agency.Before disposing of dam- aged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs, take them to your local recycling center for proper disposal, or call 1-800-822-8837. The battery is not fully charged. Before first use, the battery pack requires 8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5 hours for the battery to be fully charged. Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life. Never over-discharge a battery by using the tool even after tool performance has decreased.Do not attempt to discharge a tool’s battery by continuing to pull on the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance. Charge battery pack at ambient temperatures between 50° F – 104° F. Store tool and battery pack in locations where temperatures will not exceed 120°F. This is important to prevent serious damage to the battery cells. The battery pack should always be recharged when the Cordless Drill begins to run slowly. When battery pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another.Shorting the battery terminals together may cause sparks, burns, or fire. 10 ® 1211 6 7 10 9 8 2 1 13 3 4 5 9. High/Low Speed Switch 10. Variable Speed Controlled Trigger Switch 11. Accessory/Bit Holder 12. Comfort Rubber Grip ACCESSORIES: 13. Double Ended Screwdriver Bits (2)
REMOVING / ATTACHING BATTERY PACK REMOVE BATTERY PACK: 1. Press both release buttons on either side of the Cordless Drill to release the battery pack. 2. Pull battery pack free of Cordless Drill. ATTACH BATTERY PACK: 1. Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Drill. 2. Press the battery pack into place. Make sure the latches are securely fastened. Do not use the Cordless Drill if the battery pack is not seated properly. CHARGER Before using battery charger, please read carefully all instructions and cautionary markings on battery charger, battery pack and product using battery. The charger will not automatically turn “OFF” when the battery pack is fully charged.The charging indicator light will remain “ON” until the charger is disconnected from the electrical outlet. Use only the charger which accompanied your product or direct replacement as listed in this manual. Do not substitute any other charger. Use only Alltrade approved chargers with your product. Do not disassemble charger. Do not use charger if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid. The battery pack and charger heat during charging. Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack. When the battery pack requires recharging, a 3-5 hour charge allows the tool to operate at full power.A charging indicator light on the charger will illuminate to show that charging is taking place. CHARGING BATTERY PACK CHARGE BATTERY PACK: 1. Make sure the trigger on the Cordless Drill is in the “OFF”position and remove the battery pack from the Cordless Drill. 2. Plug 120V AC Adapter into household outlet and into side of battery charger. Insert battery pack into battery charger. When the battery is placed in the charger, the red LED indicator light will remain on. 3. When fully charged, reattach battery pack onto Cordless Drill, making certain latches fasten securely. Cordless Drill will not operate properly if the battery pack is not seated properly. ASSEMBLY Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet.Always turn the switch “OFF”and remove the battery pack before changing bits. INSTALLING DRILL BIT INTO KEYLESS CHUCK Before inserting a drill bit or other accessory,make sure the forward/reverse and trigger lock lever is in the center “OFF”position to prevent accidental starts that may result in injury. Do not attempt to tighten drill bits (or any other accessory) by gripping the front of the chuck and turning the tool on.This may cause personal injury and/or damage to the chuck. When removing the bit from the tool, avoid contact with skin and use proper protective gloves when grasping the bit or accessory.Accessories may be hot after prolonged use. WARNING 12 11 BATTERY PACK 120V AC ADAPTER LED LIGHT BATTERY CHARGER RELEASE BUTTON