AllTrade Kawasaki 5in Angle Grinder 840329 User Manual

							COMPONENT
#840329
5" ANGLE GRINDER INSTRUCTION MANUAL
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO
PARA EL CONSUMIDOR1-800-590-3723
Printed in China 
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND 
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE 
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION 
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE 
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP., 
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. 
CONSUMER INQUIRES SHOULD BE DIRECTED TO:
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA840329 – 5 Corded Angle Grinder_Rev 3/26/07
87-1904-60957 
						

							C CO
ON
NG
GR
RA
AT
TU
UL
LA
AT
TI
IO
ON
NS
S!
!
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
products at an affordable price, and we want you to be totally satisfied with your
product and our Customer Service. If any help and advice is needed, please 
contact us at 1-800-590-3723. Properly cared for, this tool will give you many 
years of satisfaction.
I IN
NT
TE
EN
ND
DE
ED
D 
 U
US
SE
E
This tool is intended for consumer use only.
GENERAL SAFETY RULES – FOR ALL ELECTRIC POWER TOOLS
READ AND UNDERSTAND ALL INSTRUCTIONS.Failure to
follow all instructions listed below may result in electric shock, fire and/or 
serious personal injury.
S SA
AV
VE
E 
 T
TH
HE
ES
SE
E 
 I
IN
NS
ST
TR
RU
UC
CT
TI
IO
ON
NS
S 
 F
FO
OR
R 
 F
FU
UT
TU
UR
RE
E 
 R
RE
EF
FE
ER
RE
EN
NC
CE
E.
.
R
RE
EC
CO
OG
GN
NI
IZ
ZE
E 
 S
SA
AF
FE
ET
TY
Y 
 S
SY
YM
MB
BO
OL
LS
S,
, 
 W
WO
OR
RD
DS
S 
 A
AN
ND
D 
 L
LA
AB
BE
EL
LS
S
The safety instructions provided in this manual are not intended to cover all possible
conditions and practices that may occur when operating, maintaining and cleaning
power tools.
Always use common sense and pay particular attention to all the D DA
AN
NG
GE
ER
R
, 
W WA
AR
RN
NI
IN
NG
G
, C CA
AU
UT
TI
IO
ON
N
and N NO
OT
TE
E
statements of this manual.
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
D DA
AN
NG
GE
ER
R
indicates an imminently hazardous 
situation which, if not avoided, will result in death
or serious injury.
W WA
AR
RN
NI
IN
NG
G
indicates a potentially hazardous 
situation which, if not avoided, could result in
death or serious injury.
T TA
AB
BL
LE
E 
 O
OF
F 
 C
CO
ON
NT
TE
EN
NT
TS
S
C CO
ON
NG
GR
RA
AT
TU
UL
LA
AT
TI
IO
ON
NS
S!
!
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
I IN
NT
TE
EN
ND
DE
ED
D 
 U
US
SE
E
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
S SE
EC
CT
TI
IO
ON
N 
 O
ON
NE
E
GENERAL SAFETY RULES – FOR ALL ELECTRIC POWER TOOLS  . . . . 2
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS  . . . . . . . . 2-3
IMPORTANT SAFEGUARDS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
WORK AREA  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ELECTRICAL SAFETY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PERSONAL SAFETY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
TOOL USE AND CARE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
SERVICE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
S SE
EC
CT
TI
IO
ON
N 
 T
TW
WO
O
SPECIFIC SAFETY RULES AND/OR SYMBOLS  . . . . . . . . . . . . . . . . . . . 6
SAFETY RULES FOR ANGLE GRINDERS  . . . . . . . . . . . . . . . . . . . . 6-8
SYMBOLS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
S SE
EC
CT
TI
IO
ON
N 
 T
TH
HR
RE
EE
E
FUNCTIONAL DESCRIPTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
ATTACHING AUXILIARY HANDLE  . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ATTACHING WHEEL GUARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ATTACHING WHEELS WITH DEPRESSED CENTERS  . . . . . . . . . . . 11
ATTACHING WIRE BRUSHES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EDGE GRINDING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
REMOVING GUARD FOR SANDING OR FLAT WIRE BRUSHES  . . . 12
ATTACHING SANDING DISC  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
OPERATING THE ANGLE GRINDER  . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
OPERATING THE ON / OFF SWITCH  . . . . . . . . . . . . . . . . . . . . . . . . 13
S SE
EC
CT
TI
IO
ON
N 
 F
FO
OU
UR
R
MAINTENANCE AND CLEANING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ACCESSORIES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  . . . . . . . . . . . . . . 15
S SE
EC
CT
TI
IO
ON
N 
 F
FI
IV
VE
E
3 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-18
12 
						

							W WO
OR
RK
K 
 A
AR
RE
EA
A
K Ke
ee
ep
p 
 y
yo
ou
ur
r 
 w
wo
or
rk
k 
 a
ar
re
ea
a 
 c
cl
le
ea
an
n 
 a
an
nd
d 
 w
we
el
ll
l 
 l
li
it
t.
.
Cluttered work benches and dark work
areas may cause accidents or injury.
D Do
o 
 n
no
ot
t 
 o
op
pe
er
ra
at
te
e 
 p
po
ow
we
er
r 
 t
to
oo
ol
ls
s 
 i
in
n 
 e
ex
xp
pl
lo
os
si
iv
ve
e 
 a
ar
re
ea
as
s,
, 
 s
su
uc
ch
h 
 a
as
s 
 i
in
n 
 t
th
he
e 
 p
pr
re
es
se
en
nc
ce
e 
 o
of
f 
 
f fl
la
am
mm
ma
ab
bl
le
e 
 l
li
iq
qu
ui
id
ds
s,
, 
 g
ga
as
se
es
s 
 o
or
r 
 d
du
us
st
t.
. 
 
Power tools create sparks which may ignite
the dust or fumes.
K Ke
ee
ep
p 
 b
by
ys
st
ta
an
nd
de
er
rs
s,
, 
 c
ch
hi
il
ld
dr
re
en
n 
 a
an
nd
d 
 v
vi
is
si
it
to
or
rs
s 
 a
aw
wa
ay
y 
 w
wh
hi
il
le
e 
 o
op
pe
er
ra
at
ti
in
ng
g 
 a
a 
 p
po
ow
we
er
r 
 t
to
oo
ol
l.
.
Distractions can cause you to lose control. 
E EL
LE
EC
CT
TR
RI
IC
CA
AL
L 
 S
SA
AF
FE
ET
TY
Y
D Do
ou
ub
bl
le
e 
 i
in
ns
su
ul
la
at
te
ed
d 
 t
to
oo
ol
ls
s 
 a
ar
re
e 
 e
eq
qu
ui
ip
pp
pe
ed
d 
 w
wi
it
th
h 
 a
a 
 p
po
ol
la
ar
ri
iz
ze
ed
d 
 p
pl
lu
ug
g 
 (
(o
on
ne
e 
 b
bl
la
ad
de
e 
 i
is
s
w wi
id
de
er
r 
 t
th
ha
an
n 
 t
th
he
e 
 o
ot
th
he
er
r.
.)
) 
 T
Th
hi
is
s 
 p
pl
lu
ug
g 
 w
wi
il
ll
l 
 f
fi
it
t 
 i
in
n 
 a
a 
 p
po
ol
la
ar
ri
iz
ze
ed
d 
 o
ou
ut
tl
le
et
t 
 o
on
nl
ly
y 
 o
on
ne
e 
 w
wa
ay
y.
. 
 I
If
f
t th
he
e 
 p
pl
lu
ug
g 
 d
do
oe
es
s 
 n
no
ot
t 
 f
fi
it
t 
 f
fu
ul
ll
ly
y 
 i
in
n 
 t
th
he
e 
 o
ou
ut
tl
le
et
t,
, 
 r
re
ev
ve
er
rs
se
e 
 t
th
he
e 
 p
pl
lu
ug
g.
. 
 I
If
f 
 i
it
t 
 s
st
ti
il
ll
l 
 d
do
oe
es
s 
 n
no
ot
t 
 f
fi
it
t,
,
c co
on
nt
ta
ac
ct
t 
 a
a 
 q
qu
ua
al
li
if
fi
ie
ed
d 
 e
el
le
ec
ct
tr
ri
ic
ci
ia
an
n 
 t
to
o 
 i
in
ns
st
ta
al
ll
l 
 a
a 
 p
po
ol
la
ar
ri
iz
ze
ed
d 
 o
ou
ut
tl
le
et
t.
. 
 D
Do
o 
 n
no
ot
t 
 c
ch
ha
an
ng
ge
e 
 t
th
he
e
p pl
lu
ug
g 
 i
in
n 
 a
an
ny
y 
 w
wa
ay
y.
.
Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system. 
A Av
vo
oi
id
d 
 b
bo
od
dy
y 
 c
co
on
nt
ta
ac
ct
t 
 w
wi
it
th
h 
 g
gr
ro
ou
un
nd
de
ed
d 
 s
su
ur
rf
fa
ac
ce
es
s 
 s
su
uc
ch
h 
 a
as
s 
 p
pi
ip
pe
es
s,
, 
 r
ra
ad
di
ia
at
to
or
rs
s,
, 
 r
ra
an
ng
ge
es
s
a an
nd
d 
 r
re
ef
fr
ri
ig
ge
er
ra
at
to
or
rs
s
. There is an increased risk of electric shock if your body is
grounded.
D Do
o 
 n
no
ot
t 
 e
ex
xp
po
os
se
e 
 p
po
ow
we
er
r 
 t
to
oo
ol
ls
s 
 t
to
o 
 r
ra
ai
in
n 
 o
or
r 
 w
we
et
t 
 c
co
on
nd
di
it
ti
io
on
ns
s.
.
Water entering a power
tool will increase the risk of electric shock.
D Do
o 
 n
no
ot
t 
 a
ab
bu
us
se
e 
 t
th
he
e 
 c
co
or
rd
d.
. 
 N
Ne
ev
ve
er
r 
 u
us
se
e 
 t
th
he
e 
 c
co
or
rd
d 
 t
to
o 
 c
ca
ar
rr
ry
y 
 t
th
he
e 
 t
to
oo
ol
l 
 o
or
r 
 p
pu
ul
ll
l 
 t
th
he
e 
 p
pl
lu
ug
g
f fr
ro
om
m 
 a
an
n 
 o
ou
ut
tl
le
et
t.
. 
 K
Ke
ee
ep
p 
 t
th
he
e 
 c
co
or
rd
d 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 h
he
ea
at
t,
, 
 o
oi
il
l,
, 
 s
sh
ha
ar
rp
p 
 e
ed
dg
ge
es
s,
, 
 o
or
r 
 m
mo
ov
vi
in
ng
g
p pa
ar
rt
ts
s.
. 
 R
Re
ep
pl
la
ac
ce
e 
 d
da
am
ma
ag
ge
ed
d 
 c
co
or
rd
ds
s 
 i
im
mm
me
ed
di
ia
at
te
el
ly
y
. Damaged cords increase the risk
of electric shock.
W Wh
he
en
n 
 o
op
pe
er
ra
at
ti
in
ng
g 
 t
th
he
e 
 t
to
oo
ol
l 
 o
ou
ut
ts
si
id
de
e,
, 
 u
us
se
e 
 a
an
n 
 o
ou
ut
td
do
oo
or
r 
 e
ex
xt
te
en
ns
si
io
on
n 
 c
co
or
rd
d 
 m
ma
ar
rk
ke
ed
d 
 “
“W
W-
-
A A”
” 
 o
or
r 
 “
“W
W.
.”
”
These cords are rated for outdoor use and reduce the risk of elec-
tric shock.
4
C CA
AU
UT
TI
IO
ON
N
indicates a potentially hazardous 
situation which, if not avoided, may result in
minor or moderate injury.
C CA
AU
UT
TI
IO
ON
N
used without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
N NO
OT
TE
E
provides additional information that is useful
for proper use and maintenance of this tool. If a
NOTE is indicated make sure it is fully understood.
I IM
MP
PO
OR
RT
TA
AN
NT
T 
 S
SA
AF
FE
EG
GU
UA
AR
RD
DS
S
P Pe
eo
op
pl
le
e 
 w
wi
it
th
h 
 e
el
le
ec
ct
tr
ro
on
ni
ic
c 
 d
de
ev
vi
ic
ce
es
s,
, 
 s
su
uc
ch
h 
 a
as
s 
 p
pa
ac
ce
em
ma
ak
ke
er
rs
s,
, 
 s
sh
ho
ou
ul
ld
d 
 c
co
on
ns
su
ul
lt
t 
 t
th
he
ei
ir
r
p ph
hy
ys
si
ic
ci
ia
an
n(
(s
s)
) 
 b
be
ef
fo
or
re
e 
 u
us
si
in
ng
g 
 t
th
hi
is
s 
 p
pr
ro
od
du
uc
ct
t.
. 
 O
Op
pe
er
ra
at
ti
io
on
n 
 o
of
f 
 e
el
le
ec
ct
tr
ri
ic
ca
al
l 
 e
eq
qu
ui
ip
pm
me
en
nt
t 
 i
in
n
c cl
lo
os
se
e 
 p
pr
ro
ox
xi
im
mi
it
ty
y 
 t
to
o 
 a
a 
 h
he
ea
ar
rt
t 
 p
pa
ac
ce
em
ma
ak
ke
er
r 
 c
co
ou
ul
ld
d 
 c
ca
au
us
se
e 
 i
in
nt
te
er
rf
fe
er
re
en
nc
ce
e 
 o
or
r 
 f
fa
ai
il
lu
ur
re
e 
 o
of
f
t th
he
e 
 p
pa
ac
ce
em
ma
ak
ke
er
r.
.
W WA
AR
RN
NI
IN
NG
G:
:
Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints. 
• Crystalline silica from bricks and cement and other masonry products,
and arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
W WA
AR
RN
NI
IN
NG
G:
: 
 
Handling the power cord on corded products may expose you to
lead, a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm.
W Wa
as
sh
h 
 h
ha
an
nd
ds
s 
 a
af
ft
te
er
r 
 h
ha
an
nd
dl
li
in
ng
g.
.3 
						

							M Ma
ai
in
nt
ta
ai
in
n 
 t
to
oo
ol
ls
s 
 w
wi
it
th
h 
 c
ca
ar
re
e.
. 
 K
Ke
ee
ep
p 
 c
cu
ut
tt
ti
in
ng
g 
 t
to
oo
ol
ls
s 
 s
sh
ha
ar
rp
p 
 a
an
nd
d 
 c
cl
le
ea
an
n.
. 
 
Properly maintained
tools with a sharp cutting edge are less likely to bind and are easier to control.
C Ch
he
ec
ck
k 
 f
fo
or
r 
 m
mi
is
sa
al
li
ig
gn
nm
me
en
nt
t 
 o
or
r 
 b
bi
in
nd
di
in
ng
g 
 o
of
f 
 m
mo
ov
vi
in
ng
g 
 p
pa
ar
rt
ts
s,
, 
 b
br
re
ea
ak
ka
ag
ge
e 
 o
of
f 
 p
pa
ar
rt
ts
s,
, 
 a
an
nd
d 
 a
an
ny
y
o ot
th
he
er
r 
 c
co
on
nd
di
it
ti
io
on
n 
 t
th
ha
at
t 
 m
ma
ay
y 
 a
af
ff
fe
ec
ct
t 
 t
th
he
e 
 t
to
oo
ol
l’
’s
s 
 o
op
pe
er
ra
at
ti
io
on
n.
.I
If
f 
 d
da
am
ma
ag
ge
ed
d,
, 
 h
ha
av
ve
e 
 t
th
he
e 
 t
to
oo
ol
l
s se
er
rv
vi
ic
ce
ed
d 
 b
be
ef
fo
or
re
e 
 u
us
si
in
ng
g.
.
Many accidents are caused by poorly maintained tools.
U Us
se
e 
 o
on
nl
ly
y 
 a
ac
cc
ce
es
ss
so
or
ri
ie
es
s 
 t
th
ha
at
t 
 a
ar
re
e 
 r
re
ec
co
om
mm
me
en
nd
de
ed
d 
 b
by
y 
 t
th
he
e 
 m
ma
an
nu
uf
fa
ac
ct
tu
ur
re
er
r 
 f
fo
or
r 
 y
yo
ou
ur
r
m mo
od
de
el
l.
.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.
S SE
ER
RV
VI
IC
CE
E
T To
oo
ol
l 
 s
se
er
rv
vi
ic
ce
e 
 m
mu
us
st
t 
 b
be
e 
 p
pe
er
rf
fo
or
rm
me
ed
d 
 o
on
nl
ly
y 
 b
by
y 
 q
qu
ua
al
li
if
fi
ie
ed
d 
 r
re
ep
pa
ai
ir
r 
 p
pe
er
rs
so
on
nn
ne
el
l.
.
Service or
maintenance by unqualified personnel may result in a risk of injury. 
W Wh
he
en
n 
 s
se
er
rv
vi
ic
ci
in
ng
g 
 a
a 
 t
to
oo
ol
l,
, 
 u
us
se
e 
 o
on
nl
ly
y 
 i
id
de
en
nt
ti
ic
ca
al
l 
 r
re
ep
pl
la
ac
ce
em
me
en
nt
t 
 p
pa
ar
rt
ts
s.
. 
 F
Fo
ol
ll
lo
ow
w 
 i
in
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
i in
n 
 t
th
he
e 
 M
Ma
ai
in
nt
te
en
na
an
nc
ce
e 
 s
se
ec
ct
ti
io
on
n 
 o
of
f 
 t
th
hi
is
s 
 m
ma
an
nu
ua
al
l.
. 
 
Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of electric shock or injury.
S SP
PE
EC
CI
IF
FI
IC
C 
 S
SA
AF
FE
ET
TY
Y 
 R
RU
UL
LE
ES
S 
 A
AN
ND
D/
/O
OR
R 
 S
SY
YM
MB
BO
OL
LS
S
H Ho
ol
ld
d 
 t
to
oo
ol
l 
 b
by
y 
 i
in
ns
su
ul
la
at
te
ed
d 
 g
gr
ri
ip
pp
pi
in
ng
g 
 s
su
ur
rf
fa
ac
ce
es
s 
 w
wh
he
en
n 
 p
pe
er
rf
fo
or
rm
m-
-
i in
ng
g 
 a
an
n 
 o
op
pe
er
ra
at
ti
io
on
n 
 w
wh
he
er
re
e 
 t
th
he
e 
 c
cu
ut
tt
ti
in
ng
g 
 t
to
oo
ol
l 
 m
ma
ay
y 
 c
co
on
nt
ta
ac
ct
t 
 h
hi
id
dd
de
en
n 
 w
wi
ir
ri
in
ng
g 
 o
or
r 
 i
it
ts
s 
 o
ow
wn
n
c co
or
rd
d.
.
Contact with a “live” wire will also make exposed metal parts of the tool
“live” and shock the operator.
S SA
AF
FE
ET
TY
Y 
 R
RU
UL
LE
ES
S 
 F
FO
OR
R 
 A
AN
NG
GL
LE
E 
 G
GR
RI
IN
ND
DE
ER
RS
S
N Ne
ev
ve
er
r 
 u
us
se
e 
 t
th
hi
is
s 
 t
to
oo
ol
l 
 w
wi
it
th
ho
ou
ut
t 
 t
th
he
e 
 p
pr
ro
op
pe
er
r 
 g
gu
ua
ar
rd
d.
. 
 
The grinding wheel could shat-
ter during use. Make sure the guard covers the side of the wheel facing you.
N Ne
ev
ve
er
r 
 b
bo
ou
un
nc
ce
e 
 t
th
he
e 
 t
tooo
ol
l 
 w
wh
hi
il
le
e 
 g
gr
ri
in
nd
di
in
ng
g.
. 
 T
Th
hi
is
s 
 m
ma
ay
y 
 c
cr
ra
ac
ck
k 
 t
th
he
e 
 w
wh
he
ee
el
l.
.
G Gr
ri
in
nd
di
in
ng
g 
 m
me
et
ta
al
l 
 w
wi
il
ll
l 
 c
ca
au
us
se
e 
 s
sp
pa
ar
rk
ks
s!
! 
 K
Ke
ee
ep
p 
 t
th
he
em
m 
 d
di
ir
re
ec
ct
te
ed
d 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 p
pe
eo
op
pl
le
e 
 a
an
nd
d
f fl
la
am
mm
ma
ab
bl
le
e 
 m
ma
at
te
er
ri
ia
al
ls
s.
. 
 A
Al
lw
wa
ay
ys
s 
 k
ke
ee
ep
p 
 t
th
he
e 
 g
gu
ua
ar
rd
d 
 p
po
os
si
it
ti
io
on
ne
ed
d 
 s
so
o 
 t
th
ha
at
t 
 a
as
s 
 m
mu
uc
ch
h 
 o
of
f
t th
he
e 
 e
ex
xp
po
os
se
ed
d 
 d
di
is
sc
c 
 a
as
s 
 p
po
os
ss
si
ib
bl
le
e 
 i
is
s 
 p
po
oi
in
nt
ti
in
ng
g 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 y
yo
ou
u.
.
K Ke
ee
ep
p 
 c
ch
hi
il
ld
dr
re
en
n 
 a
an
nd
d 
 p
pr
re
eg
gn
na
an
nt
t 
 w
wo
om
me
en
n 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 t
th
he
e 
 w
wo
or
rk
k 
 a
ar
re
ea
a 
 u
un
nt
ti
il
l 
 t
th
he
e 
 g
gr
ri
in
nd
d-
-
i in
ng
g 
 i
is
s 
 c
co
om
mp
pl
le
et
te
ed
d 
 a
an
nd
d 
 t
th
he
e 
 a
ar
re
ea
a 
 h
ha
as
s 
 b
be
ee
en
n 
 c
cl
le
ea
an
ne
ed
d 
 u
up
p.
.
A Al
lw
wa
ay
ys
s 
 w
we
ea
ar
r 
 f
fu
ul
ll
l 
 e
ey
ye
e,
, 
 f
fa
ac
ce
e 
 a
an
nd
d 
 b
bo
od
dy
y 
 p
pr
ro
ot
te
ec
ct
ti
io
on
n.
. 
 
Wire bristles may break off and fly
toward the user. Always wear ear protection when grinding in enclosed spaces. Noise
level may be amplified in such locations and may cause permanent hearing loss.
P PE
ER
RS
SO
ON
NA
AL
L 
 S
SA
AF
FE
ET
TY
Y
S St
ta
ay
y 
 a
al
le
er
rt
t,
, 
 w
wa
at
tc
ch
h 
 w
wh
ha
at
t 
 y
yo
ou
u 
 a
ar
re
e 
 d
do
oi
in
ng
g,
, 
 a
an
nd
d 
 u
us
se
e 
 c
co
om
mm
mo
on
n 
 s
se
en
ns
se
e 
 w
wh
he
en
n 
 o
op
pe
er
ra
at
t-
-
i in
ng
g 
 a
a 
 p
po
ow
we
er
r 
 t
to
oo
ol
l.
. 
 D
Do
o 
 n
no
ot
t 
 u
us
se
e 
 t
to
oo
ol
l 
 w
wh
hi
il
le
e 
 t
ti
ir
re
ed
d 
 o
or
r 
 u
un
nd
de
er
r 
 t
th
he
e 
 i
in
nf
fl
lu
ue
en
nc
ce
e 
 o
of
f 
 d
dr
ru
ug
gs
s,
,
a al
lc
co
oh
ho
ol
l 
 o
or
r 
 m
me
ed
di
ic
ca
at
ti
io
on
n.
.
A moment of inattention while operating power tools
may result in serious personal injury.
D Dr
re
es
ss
s 
 p
pr
ro
op
pe
er
rl
ly
y.
. 
 D
Do
o 
 n
no
ot
t 
 w
we
ea
ar
r 
 l
lo
oo
os
se
e 
 c
cl
lo
ot
th
hi
in
ng
g 
 o
or
r 
 j
je
ew
we
el
lr
ry
y.
. 
 C
Co
on
nt
ta
ai
in
n 
 l
lo
on
ng
g 
 h
ha
ai
ir
r.
.
K Ke
ee
ep
p 
 y
yo
ou
ur
r 
 h
ha
ai
ir
r,
, 
 c
cl
lo
ot
th
hi
in
ng
g,
, 
 a
an
nd
d 
 g
gl
lo
ov
ve
es
s 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 m
mo
ov
vi
in
ng
g 
 p
pa
ar
rt
ts
s.
.
Loose clothes,
jewelry or long hair can be caught in moving parts.
A Av
vo
oi
id
d 
 a
ac
cc
ci
id
de
en
nt
ta
al
l 
 s
st
ta
ar
rt
ti
in
ng
g.
. 
 B
Be
e 
 s
su
ur
re
e 
 t
th
he
e 
 s
sw
wi
it
tc
ch
h 
 i
is
s 
 o
of
ff
f 
 b
be
ef
fo
or
re
e 
 p
pl
lu
ug
gg
gi
in
ng
g 
 i
in
n.
.
Carrying tools with your finger on the switch or plugging in tools that have the
switch on invites accidents.
R Re
em
mo
ov
ve
e 
 a
ad
dj
ju
us
st
ti
in
ng
g 
 k
ke
ey
ys
s 
 o
or
r 
 w
wr
re
en
nc
ch
he
es
s 
 b
be
ef
fo
or
re
e 
 t
tu
ur
rn
ni
in
ng
g 
 t
th
he
e 
 p
po
ow
we
er
r 
 t
to
oo
ol
l 
 “
“O
ON
N”
”.
.
A wrench or a key that is left attached to a rotating part of the power tool may
result in personal injury.
D Do
o 
 n
no
ot
t 
 o
ov
ve
er
rr
re
ea
ac
ch
h.
. 
 K
Ke
ee
ep
p 
 p
pr
ro
op
pe
er
r 
 f
fo
oo
ot
ti
in
ng
g 
 a
an
nd
d 
 b
ba
al
la
an
nc
ce
e 
 a
at
t 
 a
al
ll
l 
 t
ti
im
me
es
s.
. 
 
Proper foot-
ing and balance enables better control of the power tool in unexpected situa-
tions.
U Us
se
e 
 s
sa
af
fe
et
ty
y 
 e
eq
qu
ui
ip
pm
me
en
nt
t.
. 
 A
Al
lw
wa
ay
ys
s 
 w
we
ea
ar
r 
 e
ey
ye
e 
 p
pr
ro
ot
te
ec
ct
ti
io
on
n.
. 
 
Dust mask, non-skid safe-
ty shoes, hard hat or hearing protection must be used for appropriate conditions.
T TO
OO
OL
L 
 U
US
SE
E 
 A
AN
ND
D 
 C
CA
AR
RE
E
U Us
se
e 
 c
cl
la
am
mp
ps
s 
 o
or
r 
 o
ot
th
he
er
r 
 p
pr
ra
ac
ct
ti
ic
ca
al
l 
 w
wa
ay
ys
s 
 t
to
o 
 s
se
ec
cu
ur
re
e 
 a
an
nd
d 
 s
su
up
pp
po
or
rt
t 
 t
th
he
e 
 w
wo
or
rk
kp
pi
ie
ec
ce
e 
 t
to
o 
 a
a 
 
s st
ta
ab
bl
le
e 
 p
pl
la
at
tf
fo
or
rm
m.
.
Holding the work by hand or against your body is unstable and
may lead to loss of control.
D Do
o 
 n
no
ot
t 
 f
fo
or
rc
ce
e 
 t
to
oo
ol
l.
. 
 U
Us
se
e 
 t
th
he
e 
 c
co
or
rr
re
ec
ct
t 
 t
to
oo
ol
l 
 f
fo
or
r 
 y
yo
ou
ur
r 
 a
ap
pp
pl
li
ic
ca
at
ti
io
on
n.
.
The correct tool
will do the job better and safer at the rate for which it is designed.
D Do
o 
 n
no
ot
t 
 u
us
se
e 
 t
th
he
e 
 t
to
oo
ol
l 
 i
if
f 
 t
th
he
e 
 p
po
ow
we
er
r 
 s
sw
wi
it
tc
ch
h 
 d
do
oe
es
s 
 n
no
ot
t 
 t
tu
ur
rn
n 
 i
it
t 
 “
“O
ON
N”
” 
 o
or
r 
 “
“O
OF
FF
F”
”.
.
A tool that
cannot be controlled with the switch is dangerous and must be repaired.
D Di
is
sc
co
on
nn
ne
ec
ct
t 
 t
th
he
e 
 p
po
ow
we
er
r 
 c
co
or
rd
d 
 p
pl
lu
ug
g 
 f
fr
ro
om
m 
 t
th
he
e 
 p
po
ow
we
er
r 
 s
so
ou
ur
rc
ce
e 
 b
be
ef
fo
or
re
e 
 m
ma
ak
ki
in
ng
g 
 a
an
ny
y 
 
a ad
dj
ju
us
st
tm
me
en
nt
ts
s,
, 
 c
ch
ha
an
ng
gi
in
ng
g 
 a
ac
cc
ce
es
ss
so
or
ri
ie
es
s 
 o
or
r 
 s
st
to
or
ri
in
ng
g 
 t
th
he
e 
 t
to
oo
ol
l.
. 
 
Such preventive safe-
ty measures reduce the risk of starting the tool accidentally.
S St
to
or
re
e 
 i
id
dl
le
e 
 t
to
oo
ol
ls
s 
 o
ou
ut
t 
 o
of
f 
 r
re
ea
ac
ch
h 
 o
of
f 
 c
ch
hi
il
ld
dr
re
en
n 
 a
an
nd
d 
 o
ot
th
he
er
r 
 u
un
nt
tr
ra
ai
in
ne
ed
d 
 p
pe
er
rs
so
on
ns
s.
. 
 
Tools
are dangerous in the hands of untrained users.
5 
						

							U Un
np
pl
lu
ug
g 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 f
fr
ro
om
m 
 p
po
ow
we
er
r 
 s
su
up
pp
pl
ly
y 
 a
an
nd
d 
 p
pl
la
ac
ce
e 
 t
th
he
e 
 s
sw
wi
it
tc
ch
h 
 i
in
n 
 t
th
he
e 
 l
lo
oc
ck
ke
ed
d
o or
r 
 “
“O
OF
FF
F”
” 
 p
po
os
si
it
ti
io
on
n 
 b
be
ef
fo
or
re
e 
 m
ma
ak
ki
in
ng
g 
 a
an
ny
y 
 a
as
ss
se
em
mb
bl
ly
y 
 a
ad
dj
ju
us
st
tm
me
en
nt
ts
s,
, 
 c
ch
ha
an
ng
gi
in
ng
g
a ac
cc
ce
es
ss
so
or
ri
ie
es
s 
 o
or
r 
 p
pe
er
rf
fo
or
rm
mi
in
ng
g 
 a
an
ny
y 
 i
in
ns
sp
pe
ec
ct
ti
io
on
n,
, 
 m
ma
ai
in
nt
te
en
na
an
nc
ce
e 
 o
or
r 
 c
cl
le
ea
an
ni
in
ng
g 
 p
pr
ro
oc
ce
e-
-
d du
ur
re
es
s.
. 
 
Such preventive safety measures reduce the risk of starting the tool acci-
dentally which could cause serious personal injury.
O On
nl
ly
y 
 u
us
se
e 
 g
gr
ri
in
nd
di
in
ng
g 
 a
an
nd
d 
 c
cu
ut
tt
ti
in
ng
g 
 w
wh
he
ee
el
ls
s 
 t
th
ha
at
t 
 a
ar
re
e 
 a
ap
pp
pr
ro
ov
ve
ed
d 
 f
fo
or
r 
 a
a 
 m
ma
ax
xi
im
mu
um
m
s sp
pe
ee
ed
d 
 o
of
f 
 1
13
3,
,0
00
00
0 
 r
rp
pm
m 
 o
or
r 
 g
gr
re
ea
at
te
er
r.
.
A Af
ft
te
er
r 
 r
re
ep
pl
la
ac
ci
in
ng
g 
 a
a 
 w
wh
he
ee
el
l 
 o
or
r 
 b
br
ru
us
sh
h,
, 
 a
al
lw
wa
ay
ys
s 
 l
le
et
t 
 t
th
he
e 
 t
to
oo
ol
l 
 r
ru
un
n 
 f
fo
or
r 
 o
on
ne
e 
 m
mi
in
nu
ut
te
e 
 i
in
n 
 a
a 
 
w we
el
ll
l-
-p
pr
ro
ot
te
ec
ct
te
ed
d 
 a
ar
re
ea
a.
. 
 
If the new accessory has an undetected flaw, it should
break apart in less than a minute.
D Do
o 
 n
no
ot
t 
 u
us
se
e 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 i
if
f 
 i
it
t 
 h
ha
as
s 
 b
be
ee
en
n 
 d
da
am
ma
ag
ge
ed
d,
, 
 l
le
ef
ft
t 
 o
ou
ut
td
do
oo
or
rs
s 
 i
in
n 
 t
thhe
e
r ra
ai
in
n,
, 
 s
sn
no
ow
w,
, 
 w
we
et
t 
 o
or
r 
 d
da
am
mp
p 
 e
en
nv
vi
ir
ro
on
nm
me
en
nt
ts
s,
, 
 o
or
r 
 i
im
mm
me
er
rs
se
ed
d 
 i
in
n 
 l
li
iq
qu
ui
id
d.
.
M Ma
ai
in
nt
ta
ai
in
n 
 l
la
ab
be
el
ls
s 
 a
an
nd
d 
 n
na
am
me
ep
pl
la
at
te
es
s 
 o
on
n 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r.
. 
 
These carry important
information. If unreadable or missing, contact Alltrade for a replacement.
S SY
YM
MB
BO
OL
LS
S
I IM
MP
PO
OR
RT
TA
AN
NT
T:
: 
 
Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
S SY
YM
MB
BO
OL
LN
NA
AM
ME
EE
EX
XP
PL
LA
AN
NA
AT
TI
IO
ON
N
V Volts Voltage (Potential)A Amperes CurrentHz Hertz Frequency (Cycles per Second)W Watt PowerKg Kilograms Weight
Alternating Current Type of CurrentDirect Current Type of CurrentAlternating or Direct Current Type of CurrentEarthing Terminal Grounding TerminalClass II Construction Denotes Double Insulation
min Minutes Times Seconds Time

Diameter Size of Drill Bits, 
Grinding Wheels, etc.
No load speed No-load Rotational Speed
.../min Revolutions per Minute Revolutions, Surface Speed, 
Strokes, etc. per Minute
1,2,3, … Ring Selector Settings Speed, Torque or Position Settings
7
A Al
lw
wa
ay
ys
s 
 w
we
ea
ar
r 
 a
an
n 
 O
OS
SH
HA
A 
 a
ap
pp
pr
ro
ov
ve
ed
d 
 d
du
us
sk
k 
 m
ma
as
sk
k 
 o
or
r 
 r
re
es
sp
pi
ir
ra
at
to
or
r 
 w
wh
he
en
n 
 i
in
ns
si
id
de
e 
 t
th
he
e
w wo
or
rk
k 
 a
ar
re
ea
a.
. 
 
Replace the filter daily. NOTE: Not all dust masks offer protection
from lead paint dust. Be sure to use the proper mask for the job.
B Be
ef
fo
or
re
e 
 c
co
on
nn
ne
ec
ct
ti
in
ng
g 
 t
th
he
e 
 t
to
oo
ol
l 
 t
to
o 
 t
th
he
e 
 p
po
ow
we
er
r 
 s
su
up
pp
pl
ly
y 
 f
fo
ol
ll
lo
ow
w 
 t
th
he
e 
 s
sa
af
fe
et
ty
y 
 i
in
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
f fo
or
r 
 i
in
ns
st
ta
al
ll
li
in
ng
g 
 t
th
he
e 
 g
gr
ri
in
nd
di
in
ng
g 
 o
or
r 
 c
cu
ut
tt
ti
in
ng
g 
 w
wh
he
ee
el
ls
s.
.
Do not lock the wheels too tight
or cracks may occur.
O On
nl
ly
y 
 u
us
se
e 
 g
gr
ri
in
nd
di
in
ng
g 
 o
or
r 
 c
cu
ut
tt
ti
in
ng
g 
 w
wh
he
ee
el
ls
s 
 w
wi
it
th
h 
 t
th
he
e 
 c
co
or
rr
re
ec
ct
t 
 b
bo
or
re
e 
 s
si
iz
ze
e 
 f
fo
or
r 
 t
th
he
e 
 s
sp
pi
in
nd
dl
le
e
o of
f 
 t
th
he
e 
 g
gr
ri
in
nd
de
er
r.
.
U Us
se
e 
 s
st
ta
an
nd
da
ar
rd
d 
 p
pa
ar
rt
ts
s.
.
Do not use coolant or water and do not use as a fixed grinder.
D Do
o 
 n
no
ot
t 
 s
st
ta
ar
rt
t 
 t
th
he
e 
 t
to
oo
ol
l 
 w
wh
he
en
n 
 t
th
he
e 
 g
gr
ri
in
nd
di
in
ng
g 
 o
or
r 
 c
cu
ut
tt
ti
in
ng
g 
 w
wh
he
ee
el
ls
s 
 a
ar
re
e 
 t
to
ou
uc
ch
hi
in
ng
g 
 t
th
he
e 
 w
wo
or
rk
k 
 a
ar
re
ea
a.
.
K Ke
ee
ep
p 
 t
th
he
e 
 p
po
ow
we
er
r 
 c
co
or
rd
d 
 w
we
el
ll
l 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 t
th
he
e 
 c
cu
ut
tt
ti
in
ng
g 
 a
ar
re
ea
a 
 d
du
ur
ri
in
ng
g 
 u
us
se
e.
. 
 
Always position
the cord so that it will not be caught in the workpiece when the grinder is in use.
A Al
lw
wa
ay
ys
s 
 h
ha
av
ve
e 
 t
th
he
e 
 g
gu
ua
ar
rd
ds
s 
 i
in
n 
 p
pl
la
ac
ce
e 
 a
an
nd
d 
 p
pr
ro
op
pe
er
rl
ly
y 
 p
po
os
si
it
ti
io
on
ne
ed
d 
 w
wh
he
en
n 
 u
us
si
in
ng
g 
 g
gr
ri
in
nd
d-
-
i in
ng
g 
 w
wh
he
ee
el
ls
s 
 o
or
r 
 w
wi
ir
re
e 
 c
cu
up
p 
 b
br
ru
us
sh
he
es
s.
.
S Se
ec
cu
ur
re
e 
 t
th
he
e 
 m
ma
at
te
er
ri
ia
al
l 
 b
be
ei
in
ng
g 
 g
gr
ri
in
nd
de
ed
d.
. 
 N
Ne
ev
ve
er
r 
 h
ho
ol
ld
d 
 i
it
t 
 i
in
n 
 y
yo
ou
ur
r 
 h
ha
an
nd
d 
 o
or
r 
 a
ac
cr
ro
os
ss
s 
 y
yo
ou
ur
r
l le
eg
gs
s.
. 
 
Do not use your legs or feet to stabilize the workpiece. Unstable support
can cause loss of control and could result in lacerations or injury.
A Al
lw
wa
ay
ys
s 
 m
ma
ak
ke
e 
 s
su
ur
re
e 
 n
no
o 
 o
on
ne
e,
, 
 i
in
nc
cl
lu
ud
di
in
ng
g 
 t
th
he
e 
 u
us
se
er
r,
, 
 i
is
s 
 i
in
n 
 l
li
in
ne
e 
 w
wi
it
th
h 
 t
th
he
e 
 t
to
oo
ol
l 
 w
wh
he
en
n
s st
ta
ar
rt
ti
in
ng
gt
th
he
e 
 m
mo
ot
to
or
r.
.
A Al
lw
wa
ay
ys
s 
 u
us
se
e 
 b
bo
ot
th
h 
 h
ha
an
nd
ds
s 
 w
wh
he
en
n 
 o
op
pe
er
ra
at
ti
in
ng
g 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r.
.
A Al
lw
wa
ay
ys
s 
 h
ho
ol
ld
d 
 t
th
hi
is
s 
 t
to
oo
ol
l 
 b
by
y 
 t
th
he
e 
 i
in
ns
su
ul
la
at
te
ed
d 
 g
gr
ri
ip
pp
pi
in
ng
g 
 s
su
ur
rf
fa
ac
ce
es
s.
. 
 
If this tool should 
accidentally cut across its own cord or hidden wiring, all exposed metal parts
will become live and could seriously shock the user.
W Wh
he
en
n 
 u
us
si
in
ng
g 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r,
, 
 a
al
lw
wa
ay
ys
s 
 m
ma
ai
in
nt
ta
ai
in
n 
 a
a 
 f
fi
ir
rm
m 
 g
gr
ri
ip
p 
 o
on
n 
 t
th
he
e 
 t
to
oo
ol
l.
. 
 
Keep
your hands well away from the grinding wheel or brush. Never reach under-
neath the Angle Grinder while the sanding disk is in motion.
W Wh
he
en
n 
 t
th
he
eA
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 i
is
s 
 i
in
n 
 o
op
pe
er
ra
at
ti
io
on
n,
, 
 k
ke
ee
ep
p 
 h
ha
an
nd
ds
s 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 t
th
he
e 
 c
cu
ut
tt
ti
in
ng
g 
 o
or
r
g gr
ri
in
nd
di
in
ng
g 
 a
ar
re
ea
a.
.
D Do
o 
 n
no
ot
t 
 r
ru
un
n 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 w
wh
hi
il
le
e 
 c
ca
ar
rr
ry
yi
in
ng
g 
 i
it
t 
 a
at
t 
 y
yo
ou
ur
r 
 s
si
id
de
e.
. 
 
A moving grind-
ing wheel or brush could cause lacerations or personal injury.
T Th
he
e 
 d
di
is
sc
c 
 w
wi
il
ll
l 
 n
no
ot
t 
 s
st
to
op
p 
 i
im
mm
me
ed
di
ia
at
te
el
ly
y 
 w
wh
he
en
n 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 i
is
s 
 t
tu
ur
rn
ne
ed
d 
 o
of
ff
f.
.
Exercise caution.
D Do
o 
 n
no
ot
t 
 s
se
et
t 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 d
do
ow
wn
n 
 a
af
ft
te
er
r 
 u
us
se
e 
 u
un
nt
ti
il
l 
 t
th
he
e 
 g
gr
ri
in
nd
di
in
ng
g 
 o
or
r 
 c
cu
ut
tt
ti
in
ng
g
w wh
he
ee
el
ls
s 
 h
ha
av
ve
e 
 c
co
om
me
e 
 t
to
o 
 a
a 
 c
co
om
mp
pl
le
et
te
e 
 s
st
to
op
p.
.
K Ke
ee
ep
p 
 t
th
he
e 
 h
ha
an
nd
dl
le
e 
 o
of
f 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 d
dr
ry
y,
, 
 c
cl
le
ea
an
n 
 a
an
nd
d 
 f
fr
re
ee
e 
 f
fr
ro
om
m 
 o
oi
il
l 
 a
an
nd
d 
 g
gr
re
ea
as
se
e.
. 
						

							A AT
TT
TA
AC
CH
HI
IN
NG
G 
 A
AU
UX
XI
IL
LI
IA
AR
RY
Y 
 H
HA
AN
ND
DL
LE
E
This tool comes with an auxiliary handle
which can be attached to different sides
of the Angle Grinder, depending on the
preference of the operator. This handle
is necessary to maintain complete con-
trol of the tool and should be used at all
times. Make sure this handle is always
fastened securely.A AT
TT
TA
AC
CH
HI
IN
NG
G 
 W
WH
HE
EE
EL
L 
 G
GU
UA
AR
RD
D
N Ne
ev
ve
er
r 
 b
br
ru
us
sh
h 
 o
or
r 
 g
gr
ri
in
nd
d 
 w
wi
it
th
ho
ou
ut
t 
 t
th
he
e 
 g
gu
ua
ar
rd
d 
 i
in
n 
 p
pl
la
ac
ce
e.
.
Brushes
are considered to be grinding wheels and must also be used with guards.
•  Always unplug the tool before attempt-
ing to change the guard or accessories.
•  Set the Angle Grinder on a flat surface
with the spindle facing up.
•  Place the spring washer of the guard
over the spindle. 
•  Tighten the screw of the spring washer.
•  Make sure that the guard is securely
tightened in place.
F FU
UN
NC
CT
TI
IO
ON
NA
AL
L 
 D
DE
ES
SC
CR
RI
IP
PT
TI
IO
ON
N
C CO
ON
NT
TR
RO
OL
LS
S 
 A
AN
ND
D 
 C
CO
OM
MP
PO
ON
NE
EN
NT
TS
S:
:
1. ON/OFF Switch with Locking Tab
2. Tool Body
3. Protective Guard
4. Grinding Wheel
5. Spindle Lock Button
6. Power Cord
C CO
OM
MP
PO
ON
NE
EN
NT
TM
MO
OD
DE
EL
L 
 N
NU
UM
MB
BE
ER
RPin Spanner 690157
A
AS
SS
SE
EM
MB
BL
LY
Y
M Ma
ak
ke
e 
 s
su
ur
re
e 
 y
yo
ou
u 
 h
ha
av
ve
e 
 f
fu
ul
ll
l 
 c
co
on
nt
tr
ro
ol
l 
 o
of
f 
 t
th
he
e 
 t
to
oo
ol
l 
 w
wh
he
en
n 
 g
gr
ri
in
nd
di
in
ng
g
i in
nt
to
o 
 a
a 
 c
co
or
rn
ne
er
r 
 a
as
s 
 a
a 
 s
sh
ha
ar
rp
p,
, 
 s
su
ud
dd
de
en
n 
 m
mo
ov
ve
em
me
en
nt
t 
 m
ma
ay
y 
 o
oc
cc
cu
ur
r 
 w
wh
he
en
n 
 t
th
he
e 
 w
wh
he
ee
el
l 
 
c co
on
nt
ta
ac
ct
ts
s 
 a
a 
 s
se
ec
co
on
nd
da
ar
ry
y 
 s
su
ur
rf
fa
ac
ce
e.
.910
A AC
CC
CE
ES
SS
SO
OR
RI
IE
ES
S:
:
7. Side Handle
8. Pin Spanner
8
54
3
6
7
1
2 
						

							A AT
TT
TA
AC
CH
HI
IN
NG
G 
 W
WI
IR
RE
E 
 B
BR
RU
US
SH
HE
ES
S
Wire cup brushes, not included, can be screwed directly on the spindle. No flanges are 
necessary.
E ED
DG
GE
E 
 G
GR
RI
IN
ND
DI
IN
NG
G
D Do
o 
 n
no
ot
t 
 u
us
se
e 
 e
ed
dg
ge
e 
 g
gr
ri
in
nd
di
in
ng
g 
 w
wh
he
ee
el
ls
s 
 f
fo
or
r 
 c
cu
ut
t-
-o
of
ff
f 
 w
wo
or
rk
k,
, 
 d
de
ee
ep
p
g gr
ri
in
nd
di
in
ng
g 
 o
or
r 
 s
su
ub
bj
je
ec
ct
t 
 t
th
he
em
m 
 t
to
o 
 a
an
nyy 
 s
si
id
de
e 
 p
pr
re
es
ss
su
ur
re
e 
 a
as
s 
 t
th
hi
is
s 
 m
ma
ay
y 
 l
le
ea
ad
d 
 t
to
o 
 b
br
re
ea
ak
ka
ag
ge
e
a an
nd
d 
 p
po
os
ss
si
ib
bl
le
e 
 p
pe
er
rs
so
on
na
al
l 
 i
in
nj
ju
ur
ry
y.
. 
 
These wheels should be used for shallow cutting
and notching (less than 1/2 in depth). Keep the open side of the guard away
from the operator at all times.
Edge grinding should only be done with wheels specifically designed for this purpose.
R RE
EM
MO
OV
VI
IN
NG
G 
 G
GU
UA
AR
RD
D 
 F
FO
OR
R 
 S
SA
AN
ND
DI
IN
NG
G 
 O
OR
R 
 U
US
SI
IN
NG
G 
 F
FL
LA
AT
T 
 W
WI
IR
RE
E 
 B
BR
RU
US
SH
HE
ES
S
•  Set the Angle Grinder on a flat surface with the spindle facing up.
•  Remove the inner and outer flanges, unscrew spring washer and remove 
the guard.
•  Store these parts carefully.
•  Replace the guard after the job is finished.
A AT
TT
TA
AC
CH
HI
IN
NG
G 
 S
SA
AN
ND
DI
IN
NG
G 
 D
DI
IS
SC
C
•  To remove the guard, see instructions given in the “Removing Guard for
Sanding or Using Flat Wire Brushes” Section above.
•  Set the inner flange and outer flange on the spindle.
•  Push in the spindle lock button. Turn the spindle until it locks into place. 
•  Once the spindle is locked, tighten the sanding disc by hand.
O OP
PE
ER
RA
AT
TI
IN
NG
GT
TH
HE
E 
 A
AN
NG
GL
LE
E 
 G
GR
RI
IN
ND
DE
ER
R
A Al
lw
wa
ay
ys
s 
 u
un
np
pl
lu
ug
g 
 t
th
he
e 
 t
to
oo
ol
l 
 b
be
ef
fo
or
re
e 
 a
at
tt
te
em
mp
pt
ti
in
ng
g 
 t
to
o 
 c
ch
ha
an
ng
ge
e 
 t
th
he
e
g gu
ua
ar
rd
d 
 o
or
r 
 a
ac
cc
ce
es
ss
so
or
ri
ie
es
s.
.
For best tool control, material removal and minimal
loading, keep the angle between the disc and the work surface at approxi-
mately 30° when grinding and 10°-15° when sanding.
WARNING
12
A AT
TT
TA
AC
CH
HI
IN
NG
G 
 W
WH
HE
EE
EL
LS
S 
 W
WI
IT
TH
H 
 D
DE
EP
PR
RE
ES
SS
SE
ED
D 
 C
CE
EN
NT
TE
ER
RS
S
A Al
lw
wa
ay
ys
s 
 c
ch
he
ec
ck
k 
 t
th
he
e 
 t
to
oo
ol
l 
 w
wa
ar
rn
ni
in
ng
g 
 l
la
ab
be
el
l 
 f
fo
or
r 
 t
th
he
e 
 r
re
ec
co
om
mm
me
en
nd
d-
-
e ed
d 
 s
sp
pe
ee
ed
d 
 r
ra
at
ti
in
ng
g 
 o
on
n 
 a
ac
cc
ce
es
ss
so
or
ri
ie
es
s.
.
Never run a wheel or brush over the rated
speed. Accessories exceeding the recommended speed may fly apart and cause
serious personal injury.
H Hu
ub
bb
be
ed
d 
 w
wh
he
ee
el
ls
s 
 d
do
o 
 n
no
ot
t 
 r
re
eq
qu
ui
ir
re
e 
 m
mo
ou
un
nt
ti
in
ng
g 
 f
fl
la
an
ng
ge
es
s.
.
•  When working with thick grinding
wheels, fit the threaded outer
flange with the raised area facing
away from the wheel.
•  Push in the spindle lock button.
Turn the outer flange until it locks
into place. 
•  Once the spindle is locked, insert
the enclosed wrench into the holes
of the outer flange to tighten the
outer flange properly.WARNING
11
SPINDLE
LOCK
BUTTON
•  Check to make sure that the guard is fit-
ted properly. Put the inner flange on 
the spindle.
•  Put the grinding wheel on the spindle
and the inner flange.
•  When working with thin grinding wheels,
fit the threaded outer flange with the
raised area facing toward the wheel. 
						

							M MA
AI
IN
NT
TE
EN
NA
AN
NC
CE
E 
 A
AN
ND
D 
 C
CL
LE
EA
AN
NI
IN
NG
G
A Al
lw
wa
ay
ys
s 
 U
UN
NP
PL
LU
UG
G 
 t
th
he
e 
 t
to
oo
ol
l 
 f
fr
ro
om
m 
 t
th
he
e 
 p
po
ow
we
er
r 
 s
so
ou
ur
rc
ce
e 
 b
be
ef
fo
or
re
e
c cl
le
ea
an
ni
in
ng
g 
 o
or
r 
 m
ma
ai
in
nt
te
en
na
an
nc
cee.
.
• U Us
se
e 
 c
co
om
mp
pr
re
es
ss
se
ed
d 
 a
ai
ir
r 
 t
to
o 
 b
bl
lo
ow
w 
 o
ou
ut
t 
 a
an
ny
y 
 a
ac
cc
cu
um
mu
ul
la
at
te
ed
d 
 d
du
us
st
t 
 o
or
r 
 g
gr
ri
it
t.
.
Tiny 
particles from metal grinding often accumulate inside your tool and could 
create an electrical shock hazard. 
• N Ne
ev
ve
er
r 
 u
us
se
e 
 s
so
ol
lv
ve
en
nt
ts
s 
 o
or
r 
 h
ha
ar
rs
sh
h 
 c
ch
he
em
mi
ic
ca
al
ls
s.
.
Use only mild soap and a damp cloth
to clean the tool. Never let any liquid get inside the casing. Never immerse any
part of the tool in a liquid. Always keep the ventilation openings clear. 
• R Re
eg
gu
ul
la
ar
rl
ly
y 
 c
cl
le
ea
an
n 
 t
th
he
e 
 v
ve
en
nt
ti
il
la
at
ti
io
on
n 
 s
sl
lo
ot
ts
s 
 i
in
n 
 y
yo
ou
ur
r 
 t
to
oo
ol
l 
 u
us
si
in
ng
g 
 a
a 
 s
so
of
ft
t 
 b
br
ru
us
sh
h 
 o
or
r 
 d
dr
ry
y
c cl
lo
ot
th
h.
.
A
AC
CC
CE
ES
SS
SO
OR
RI
IE
ES
S
U Us
se
e 
 o
on
nl
ly
y 
 a
ac
cc
ce
es
ss
so
or
ri
ie
es
s 
 t
th
ha
at
t 
 a
ar
re
e 
 r
re
ec
co
om
mm
me
en
nd
de
ed
d 
 b
by
y 
 t
th
he
e 
 m
ma
an
nu
uf
fa
ac
ct
tu
ur
re
er
r 
 f
fo
or
r 
 y
yo
ou
ur
r 
 m
mo
od
de
el
l.
.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
A Al
lw
wa
ay
ys
s 
 a
at
tt
ta
ac
ch
h 
 g
gr
ro
ou
un
nd
de
ed
d 
 (
(3
3-
-p
pr
ro
on
ng
g)
) 
 e
ex
xt
te
en
ns
si
io
on
n 
 c
co
or
rd
ds
s 
 t
to
o 
 g
gr
ro
ou
un
nd
de
ed
d 
 (
(3
3-
-h
ho
ol
le
e)
) 
 o
ou
ut
tl
le
et
ts
s.
.
I If
f 
 y
yo
ou
u 
 m
mu
us
st
t 
 u
us
se
e 
 a
an
n 
 e
ex
xt
te
en
ns
si
io
on
n 
 c
co
or
rd
d,
, 
 b
be
e 
 s
su
ur
re
e 
 t
th
ha
at
t 
 t
th
he
e 
 g
ga
au
ug
ge
e 
 i
is
s 
 l
la
ar
rg
ge
e 
 e
en
no
ou
ug
gh
h 
 t
to
o 
 c
ca
ar
rr
ry
y
t th
he
e 
 a
am
mo
ou
un
nt
t 
 o
of
f 
 c
cu
ur
rr
re
en
nt
t 
 n
ne
ec
ce
es
ss
sa
ar
ry
y 
 f
fo
or
r 
 y
yo
ou
ur
r 
 p
po
ow
we
er
r 
 t
to
oo
ol
l.
.
If not, your tool may experi-
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge
number, the heavier the cord (see table below).
R RE
EC
CO
OM
MM
ME
EN
ND
DE
ED
D 
 S
SI
IZ
ZE
ES
S 
 O
OF
F 
 E
EX
XT
TE
EN
NS
SI
IO
ON
N 
 C
CO
OR
RD
DS
S 
 1
12
20
0 
 V
VO
OL
LT
T 
 A
AC
C 
 6
60
0 
 H
HZ
Z 
 T
TO
OO
OL
LS
S
T
TO
OO
OL
L 
 C
CU
UR
RR
RE
EN
NT
T 
 R
RA
AT
TI
IN
NG
GC
CO
ON
ND
DU
UC
CT
TO
OR
R 
 S
SI
IZ
ZE
E 
 I
IN
N 
 A
A.
.W
W.
.G
G
AMPERE 10FT. 25FT. 50FT. 100FT.
3-6 18 18 18 186-8 18 18 18 168-10 18 18 18 1410-12 16 16 14 1412-16 14 12 12 -16-20 12 12 12 -
14
O OP
PE
ER
RA
AT
TI
IN
NG
G 
 T
TH
HE
E 
 O
ON
N/
/O
OF
FF
F 
 S
SW
WI
IT
TC
CH
H
N Ne
ev
ve
er
r 
 s
sw
wi
it
tc
ch
h 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 “
“O
ON
N”
” 
 o
or
r 
 “
“O
OF
FF
F”
” 
 w
wh
hi
il
le
e 
 
u un
nd
de
er
r 
 l
lo
oa
ad
d 
 c
co
on
nd
di
it
ti
io
onns
s.
.
A Al
lw
wa
ay
ys
s 
 a
al
ll
lo
ow
w 
 t
th
he
e 
 A
An
ng
gl
le
e 
 G
Gr
ri
in
nd
de
er
r 
 t
to
o 
 c
co
om
me
e 
 u
up
p 
 t
to
o 
 f
fu
ul
ll
l 
 s
sp
pe
ee
ed
d 
 b
be
ef
fo
or
re
e 
 t
to
ou
uc
ch
hi
in
ng
g 
 a
an
ny
y
s su
ur
rf
fa
ac
ce
e.
. 
 
A Al
lw
wa
ay
ys
s 
 t
ta
ak
ke
e 
 t
th
he
e 
 t
to
oo
ol
l 
 a
aw
wa
ay
y 
 f
fr
ro
om
m 
 t
th
he
e 
 w
wo
or
rk
kp
pi
ie
ec
ce
e 
 b
be
ef
fo
or
re
e 
 t
tu
ur
rn
ni
in
ng
g 
 t
th
he
e 
 t
to
oo
ol
l 
 “
“O
OF
FF
F”
”.
.
Let the tool come to a complete stop before setting it down.
T Th
hi
is
s 
 t
to
oo
ol
l 
 o
op
pe
er
ra
at
te
es
s 
 b
be
es
st
t 
 u
un
nd
de
er
r 
 l
li
ig
gh
ht
t 
 p
pr
re
es
ss
su
ur
re
e.
.
Exerting heavy pressure will not
speed up the work and may cause damage to the motor.
Press the “ON/OFF” switch to start the tool. 
To stop, release the “ON/OFF” switch. 
When continuous operation is desired, press the “ON/OFF”switch forward and
depress the lock-on button. This locks the switch“ON”until the 
lock-on button is released.
13
ON/OFF
SWITCH 
						

							and/or assembled by others, for which Alltrade makes no warranties whatsoever.
T TH
HE
ER
RE
E 
 A
AR
RE
E 
 N
NO
O 
 W
WA
AR
RR
RA
AN
NT
TI
IE
ES
S 
 W
WH
HI
IC
CH
H 
 E
EX
XT
TE
EN
ND
D 
 B
BE
EY
YO
ON
ND
D 
 T
TH
HE
E 
 D
DE
ES
SC
CR
RI
IP
PT
TI
IO
ON
N 
 O
ON
N
T TH
HE
E 
 F
FA
AC
CE
E 
 H
HE
ER
RE
EO
OF
F.
.
W Wa
ar
rr
ra
an
nt
ty
y 
 P
Pe
er
rf
fo
or
rm
ma
an
nc
ce
e 
 
By purchasing the product, purchaser expressly acknowledges and agrees that their
sole and exclusive remedy under this warranty shall be strictly limited to the repair
or replacement of any covered nonconforming items or parts thereof provided that
any such nonconforming item and/or part is promptly returned to Alltrade’s facility
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair, 
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)
within the applicable warranty period, with a written request by purchaser that
Alltrade repair and/or replace the nonconforming item and/or part. We recommend
that you keep the original product packaging in the event you need to ship the unit.
We suggest the package be insured against loss or in transit damage. When 
sending your product include your name, address, phone number, dated proof 
of purchase (or copy), and a statement about the nature of problem. Warranty 
coverage is conditioned upon purchaser furnishing Alltrade with adequate written
proof that they are the original purchaser and of the original purchase date. Parts
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if
found to be defective and subject to warranty. Alltrade retains the sole discretion 
to determine whether any item or part is nonconforming and, if so, whether the 
item and/or part will be repaired and/or replaced. If the unit is repaired, new or
reconditioned replacement parts may be used. If Alltrade chooses to replace 
the product, it may replace it with a new or reconditioned one of the same or 
comparable design. The repaired or replaced unit will be warranted under the terms
of the remainder of the warranty period. Typically, a defective product that is
returned within the first 30 days after the purchase date will be replaced; for items
returned after the first 30 days and within the warranty period, covered defective
parts not subject to normal wear and tear or other exclusions will be repaired or
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-
conforming item and/or part thereof shall constitute fulfillment of all 
obligations to the purchaser. Alltrade shall not be responsible or liable for any
expense, including freight charges, or repairs made outside Alltrade’s facility, unless
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,
commercial loss or consequential damages.
E Ex
xc
cl
lu
us
si
io
on
ns
s
This warranty does not cover parts damaged due to normal wear, abnormal 
conditions, misapplication, misuse, abuse, accidents, operation at other than 
recommended pressures or temperatures, improper storage or freight damage.
Parts damaged or worn by operation in dusty environments are not warranted.
S SP
PE
EC
CI
IF
FI
IC
CA
AT
TI
IO
ON
NS
S
S
SP
PE
EC
CI
IF
FI
IC
CA
AT
TI
IO
ON
NS
S
Voltage 120V 60 Hz Rated Current 8 ANo-Load Speed 11000/minMaximum Disc Diameter 125mm (5)
O
OT
TH
HE
ER
R 
 C
CO
ON
NS
SU
UM
ME
ER
R 
 D
DO
O-
-I
IT
T-
-Y
YO
OU
UR
RS
SE
EL
LF
F 
 (
(D
DI
IY
Y)
) 
 T
TO
OO
OL
LS
S
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the following products, please contact Alltrade Customer
Service Department at 1-800-590-3723. 
Cordless Drills/Screwdrivers
Impact Wrenches
Sanders
Jigsaws
Circular Saws
3 3 
 Y
YE
EA
AR
R 
 L
LI
IM
MI
IT
TE
ED
D 
 W
WA
AR
RR
RA
AN
NT
TY
Y
E Ex
xp
pr
re
es
ss
s 
 a
an
nd
d 
 E
Ex
xc
cl
lu
us
si
iv
ve
e 
 L
Li
im
mi
it
te
ed
dW
Wa
ar
rr
ra
an
nt
ty
y 
 t
to
o 
 O
Or
ri
ig
gi
in
na
al
l 
 R
Re
et
ta
ai
il
l 
 B
Bu
uy
ye
er
r
Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail
purchaser of the accompanying KAWASAKI™ power tool and no one else all parts
of the product (except those parts referred to below which are specifically exclud-
ed from such warranty (see Exclusions)) to be free from defects in materials and
workmanship for a period of three years from original date of purchase, except that
such warranty with regard to the battery shall be for a period of two years from
original date of purchase, unless the tool is used for commercial or rental 
purposes.
S SP
PE
EC
CI
IA
AL
L 
 W
WA
AR
RR
RA
AN
NT
TY
Y 
 N
NO
OT
TE
E 
 F
FO
OR
RC
CO
OM
MM
ME
ER
RC
CI
IA
AL
L 
 O
OR
R 
 R
RE
EN
NT
TA
AL
L 
 U
US
SE
E:
:
The above 
warranty for this Kawasaki™ power tool, including the battery, shall be effective for
only 90 days from the original date of purchase if this tool is used for any 
C CO
OM
MM
ME
ER
RC
CI
IA
AL
L 
 O
OR
R 
 R
RE
EN
NT
TA
AL
LP
PU
UR
RP
PO
OS
SE
E.
.
The date of purchase shall be the date of shipment to the original purchaser, or the
date the original purchaser took possession, custody or control of the product,
whichever occurred first. This warranty shall be null and void if the product or any
component thereof is modified or altered. This warranty does not apply to any
other product and/or component thereof manufactured or distributed by Alltrade,
and does not apply to products and/or components thereof designed, manufactured
15Angle Grinders
Reciprocating Saws
Routers
Rotary Tools
Corded and Cordless Multi-Purpose Tools
Wide Range of Accessories and more 
						

							PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY 
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH 
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING
THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE 
REMEDY IS AS STATED ABOVE.
L Li
im
mi
it
ta
at
ti
io
on
n 
 O
Of
f 
 L
Li
ia
ab
bi
il
li
it
ty
y
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS 
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, 
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL 
ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF 
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY
PERIODS SPECIFIED ABOVE.
L Li
im
mi
it
ta
at
ti
io
on
ns
s 
 o
on
n 
 W
Wa
ar
rr
ra
an
nt
ty
y 
 D
Di
is
sc
cl
la
ai
im
me
er
rs
s 
 
Some states do not allow limitations on how long an implied warranty lasts 
and some states do not allow the exclusion or limitation of the incidental or 
consequential damages, so part or all of the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
If your product is not covered by this warranty, please call our Customer Service
Department toll free at 1-800-590-3723 for general repair information and charges.
18 17
Failure to follow recommended operating and maintenance procedures also 
voids warranty.
This limited warranty does not apply to accessory items such as drill bits, 
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding
sheets and other related items.
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, 
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, 
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS
WARRANTY.
Alltrade will not be liable for the following: labor charges, loss or damage resulting
from improper operation, maintenance or repairs made by other persons; 
pre-delivery services such as assembly, oil or lubricants, and adjustment; 
maintenance services that are normally required to maintain the product.
The use of other than genuine Alltrade Repair Parts will void warranty.
W Wa
ar
rr
ra
an
nt
ty
y 
 D
Di
is
sc
cl
la
ai
im
me
er
rs
s 
 
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, 
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR 
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE 
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,