AllTrade Kawasaki 4 12in Angle Grinder 691202 User Manual

COMPONENT
#691202
4 
1/2
 ANGLE 
GRINDER 
INSTRUCTION 
MANUAL
FOR 
CUSTOMER 
SERVICE
POUR 
LE SERVICE 
APRÉS 
VENTE
OU 
DU 
CONSOMMATEUR
PARA 
EL SERVICIO
PARA 
EL CONSUMIDOR
1-800-590-3723
Printed 
in China 
87-1904-60957
KAWASAKI™
IS A TRADEMARK 
LICENSED 
BY KAWASAKI™
MOTORS 
CORP
., U.S.A., 
WHICH 
DOES 
NOT 
MANUF
ACTURE 
OR 
DISTRIBUTE 
THIS 
PRODUCT
. CONSUMER 
INQUIRES 
SHOULD 
BE
DIRECTED 
TO:
©COPYRIGHT 
2006 
ALLTRADE 
TOOLS, 
LLC.
1431 
VIA PLATA
LONG 
BEACH, 
CA 90810-1462 
USA
691202 
– 4...

CONGRA
TULA
TIONS!
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
products 
at 
an 
affordable 
price, 
and 
we 
want 
you 
to 
be 
totally 
satisfied 
with 
your
product 
and 
our 
Customer 
Ser
vice. 
If 
any 
help 
and 
advice 
is 
needed, 
please 
contact 
us 
at 
1-800-590-3723. 
Properly 
cared 
for
, this 
tool 
will 
give 
you 
many 
years 
of 
satisfaction.
INTENDED 
USE
This 
tool 
is intended 
for 
consumer 
use 
only
.
RECOGNIZE 
SAFETY 
SYMBOLS, 
WORDS...

WORK 
AREA
Keep 
your 
work 
area 
clean 
and 
well 
lit.
Cluttered 
work 
benches 
and 
dark 
work
areas 
may 
cause 
accidents 
or 
injur
y.
Do 
not 
operate 
power 
tools 
in 
explosive 
areas, 
such 
as 
in 
the 
presence 
of 
flammable 
liquids, 
gases 
or 
dust. 
Power 
tools 
create 
sparks 
which 
may 
ignite
the 
dust 
or 
fumes.
Keep 
bystanders, 
children 
and 
visitors 
away 
while 
operating 
a power 
tool.
Distractions 
can 
cause 
you 
to 
lose 
control. 
ELECTRICAL 
SAFETY
Double...

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools with a sharp cutting edge are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation.If damaged, have the tool
serviced before using.Many accidents are caused by poorly m
aintained tools.
Use 
only 
accessories 
that 
are 
recommended 
by 
the 
manufacturer 
for 
your
model.
Accessories 
that 
may...

Unplug 
Angle 
Grinder 
from 
power 
supply 
and 
place 
the 
switch 
in 
the 
locked
or 
“OFF” 
position 
before 
making 
any 
assembly 
adjustments, 
changing
accessories 
or 
performing 
any 
inspection, 
maintenance 
or 
cleaning 
proce-
dures. 
Such 
preventive 
safety 
measures 
reduce 
the 
risk 
of starting 
the 
tool 
acci-
dentally 
which 
could 
cause 
serious 
personal 
injur
y.
Only 
use 
grinding 
and 
cutting 
wheels 
that 
are 
approved 
for 
a maximum
speed 
of 
13,000 
rpm 
or 
greater...

ATTACHING 
AUXILIAR
Y HANDLE
This 
tool 
comes 
with 
an 
auxiliar
y
handle 
which 
can 
be 
attached 
to 
different 
sides 
of 
the 
Angle 
Grinder
, 
depending 
on 
the 
preference 
of 
the
operator
. This 
handle 
is necessar
y to
maintain 
complete 
control 
of 
the
tool 
and 
should 
be 
used 
at all 
times.
Make 
sure 
this 
handle 
is always 
fastened 
securely
.
ATTACHING 
WHEEL 
GUARD
Never 
brush 
or 
grind 
without 
the 
guard 
in 
place.
Brushes
are 
considered 
to 
be 
grinding 
wheels 
and...

EDGE 
GRINDING
Do 
not 
use 
edge 
grinding 
wheels 
for 
cut-off 
work, 
deep
grinding 
or 
subject 
them 
to 
any 
side 
pressure 
as 
this 
may 
lead 
to 
breakage
and 
possible 
personal 
injur
y. These 
wheels 
should 
be 
used 
for 
shallow 
cutting
and 
notching 
(less 
than 
1/2 
in 
depth). 
Keep 
the 
open 
side 
of 
the 
guard 
away
from 
the 
operator 
at all 
times.
Edge grinding should only be done with wheels specifically designed for this purpose.
REMOVING 
GUARD 
FOR 
SANDING 
OR 
USING...

•Guide 
back 
and 
forth 
over 
the 
work 
piece 
in a steady 
motion.
•When 
cutting 
avoid 
tilting 
the 
Angle 
Grinder 
in the 
cutting 
plane. 
Ensure 
the 
cut-
ting 
wheel 
has 
a clean 
cutting 
edge.
•To cut 
hard 
stone 
a diamond 
cutting 
wheel 
is recommended.
•Do 
nut 
use 
cutting 
wheel 
for 
rough 
grinding.
MAINTENANCE 
AND 
CLEANING
Always 
UNPLUG 
the 
tool 
from 
the 
power 
source 
before
cleaning 
or 
maintenance.
•The 
armature 
and 
motor 
are 
the 
heart 
of 
the 
power 
tool....

SPECIAL 
WARRANTY 
NOTE 
FOR
COMMERCIAL 
OR 
RENT
AL 
USE:
The 
above 
warranty 
for
this 
Kawasaki™ 
power 
tool, 
including 
the 
batter
y, shall 
be 
effective 
for
only 
90 
days 
from 
the 
original 
date 
of 
pur
chase 
if 
this 
tool 
is 
used 
for 
any 
COMMERCIAL 
OR 
RENT
AL
PURPOSE.
The 
date 
of 
pur
chase 
shall 
be 
the 
date 
of 
shipment 
to 
the 
original 
pur
chaser
, or 
the
date 
the 
original 
pur
chaser 
took 
possession, 
custody 
or 
control 
of 
the 
product,
whichever occurred...

EXCLUSION 
AND 
DISCLAIMER 
OF 
ALL 
IMPLIED 
WARRANTIES, 
INCLUDING 
THE
IMPLIED 
WARRANTIES 
OF 
MERCHANT
ABILITY 
AND 
FITNESS 
FOR 
A PARTICULAR
PURPOSE. 
NO 
WARRANTY
, ORAL 
OR 
WRITTEN, 
OTHER 
THAN 
THE 
ABOVE 
WARRANTY 
IS 
MADE 
WITH 
REGARD 
TO 
THIS 
PRODUCT
. ALL 
EXPRESS 
AND/OR
IMPLIED 
WARRANTIES, 
GUARANTIES 
AND/OR 
REPRESENT
ATIONS 
BY 
ALL
TRADE
AND/OR 
ITS 
REPRESENT
ATIVE(S) 
REGARDING 
THE 
DESIGN, 
MANUF
ACTURE,
PURCHASE, 
USE 
AND/OR 
OPERA
TION 
OF 
THE 
PRODUCT 
OR 
ANY...