AllTrade Kawasaki 38in Variable Speed Drill 840013 User Manual
Have a look at the manual AllTrade Kawasaki 38in Variable Speed Drill 840013 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MODELMODÈLE MODELO#840013 3/8 VARIABLE SPEED ELECTRIC DRILL INSTRUCTION MANUAL MANUEL D’UTILISATION POUR PERCEUSE ÉLECTRIQUE DE 3/8 PO À VITESSE VARIABLE MANUAL DE INSTRUCCIONES SOBRE EL TALADRO ELÉCTRICO DE 3/8 DE VELOCIDAD VARIABLE THIS MANUAL CONT AINS IMPOR TANT INFORMA TION REGARDING SAFETY ,OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT .BEFORE USE, READ CAREFULL Y AND UNDERST AND ALL CAUTIONS, WARNINGS, INSTR UCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESUL T IN SERIOUS PERSONAL INJUR Y AND/OR PROPER TY DAMAGE. CE MANUEL CONTIENT DES INFORMA TIONS IMPOR TANTES CONCERNANT LA SÉCURITÉ, LE FONCTIONNEMENT ET LE REMISAGE DE CE PRODUIT .LIRE, ÉTUDIER ET VEILLER À BIEN COMPRENDRE TOUTES LES MISES EN GARDE ET INSTR UCTIONS ET AUTOCOLLANTS APPOSÉS SUR LE PRODUIT AVANT DE L’UTILISER. NE PAS RESPECTER CES INSTR UCTIONS POURRAIT ENTRAÎNER DES BLESSURES ET/OU DES DOMMAGES MATÉRIELS. ESTE MANUAL CONTIENE INFORMACIÓN IMPOR TANTE SOBRE LA SEGURIDAD, OPERACIÓN, MANTENIMIENTO Y ALMACE- NAMIENTO DE ESTE PRODUCTO. ANTES DE USARLO, LEA Y COMPRENDA TODAS LAS PRECAUCIONES, ADVER TENCIAS, INSTR UCCIONES Y ETIQUET AS DEL PRODUCTO. DE LO CONTRARIO PODRÍA SUFRIR LESIONES GRA VES O CAUSAR DAÑOS MATERIALES.IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT ,DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEP ARTMENT AT 1-800-590-3723 .BEFORE YOU CALL, HAVE THE FOLLOWING INFORMA TION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCA TION. AN ALLTRADE REPRESENT ATIVE CAN RESOL VE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT ,GIVE US A CALL OR EMAIL US AT:INFO@ALL TRADETOOLS.COM. YOUR FEEDBACK IS VITAL TO US. POUR TOUTE QUESTION OU EN CAS DE PROBLÈME AVEC LE PRODUIT ALLTRADE, NE PAS LE RETOURNER AU MAGASIN OÙ IL A ÉTÉ ACHETÉ. APPELER LE SERVICE APRÈS-VENTEAU 1-800-590-3723 .AVANT D’APPELER, VEILLER À SE PROCURER LES INFORMA TIONS SUIV ANTES :No. DE MODÈLE, DATE DE L’ACHA T ET ADRESSE DU MAGASIN. UN REPRÉSENT ANT D’ALL TRADE PEUT RÉSOUDRE VOTRE PROBLÈME PAR TÉLÉPHONE. POUR TOUT COMMENT AIRE OU SUGGESTION, N’HÉSITEZ PAS À NOUS APPELER OU NOUS CONT ACTER PAR COURRIEL À L’ADRESSE :INFO@ALL TRADETOOLS.COM. VOS COMMENT AIRES NOUS SONT EXTRÊMEMENT PRÉCIEUX. SI TIENE DUDAS O SURGEN PROBLEMAS CON SU PRODUCTO ALLTRADE, NO LO DEVUEL VA A LA TIENDA LLAME A NUESTRO DEP ARTAMENTO DE SERVICIO AL CLIENTE AL 1-800-590-3723 .ANTES DE LLAMAR, TENGA A MANO LA SIGUIENTE INFORMACIÓN: No. DE MODELO, FECHA DE COMPRA Y DIRECCIÓN DE LA TIENDA. UN REPRESENT ANTE DE ALLTRADE PUEDE RESOL VER SU PROBLEMA POR TELÉFONO. SI DESEA HACER ALGUNA SUGERENCIA O COMENT ARIO, LLÁMENOS O ENVÍENOS UN MENSAJE DE CORREO ELECTRÓNICO A.INFO@ALL TRADETOOLS.COM. SUS COMENT ARIOS SON FUNDAMENT ALES PARA NOSOTROS. 87-1904-60957 KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUF ACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: KAWASAKI™ EST UNE MARQUE DE COMMERCE DE KAWASAKI™ MOTORS CORP ., U.S.A., QUI NE FABRIQUE PAS ET NE DISTRIBUE PAS CE PRODUIT THIS PRODUCT . LES QUESTIONS DES CONSOM- MATEURS DOIVENT ÊTRE ADDRESSÉES À : KAWASAKI™ ES UNA MARCA REGISTRADA CON LICENCIA DE KAWASAKI™ MOTORS CORP ., E.U.A., QUE NO FABRICA NI DISTRIBUYE ESTE PRODUCTO. LAS CONSUL TAS DE LOS CONSUMIDORES DEBEN DIRIGIRSE A: ©COPYRIGHT 2006 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810-1462 USA 840013 – 3/8 Variable Speed Electric Drill, PERCEUSE ÉLECTRIQUE DE 3/8 PO À VITESSE VARIABLE, TALADRO ELÉCTRICO DE 3/8 DE VELOCIDAD VARIABLE _Rev . 5/10/06 FOR CUSTOMER SERVICE POUR LE SERVICE APRÉS VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1-800-590-3723 Printed in China Imprimé dans la Chine Impreso en China
CONGRA TULA TIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Ser vice. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for , this tool will give you many years of satisfaction. INTENDED USE This tool is intended for consumer use only . This tool is not designed for profes- sional use. The power cord should only be used in approved electrical outlets as described in this manual. GENERAL SAFETY RULES – FOR ALL ELECTRIC POWER TOOLS READ AND UNDERST AND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injur y. RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools. Always use common sense and pay particular attention to all the DANGER , WARNING , CAUTION and NOTE statements of this manual. This is the safety alert symbol. It is used to alert you to potential personal injur y hazards. Obey all safety messages that follow this symbol to avoid possible injur y or death. DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injur y. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injur y. TABLE OF CONTENTS CONGRA TULA TIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SECTION ONE GENERAL SAFETY RULES – FOR ALL ELECTRIC POWER TOOLS . . . .2 RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3 IMPOR TANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SECTION TWO SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . . 6 IMPOR TANT SAFETY RULES FOR DRILLS . . . . . . . . . . . . . . . . . . . 6-7 SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SECTION THREE FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 OPERA TING THE DRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 OPERA TING THE ON/OFF SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . 9 SPEED CONTROL ADJUSTING SWITCH . . . . . . . . . . . . . . . . . . . . . 9 REVERSING SWITCH LEVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 BIT INSER TION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 BIT REMOV AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 DRILLING WOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 DRILLING MASONR Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 DRILLING MET AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SECTION FOUR MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 SPECIFICA TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 OTHER CONSUMER DO-IT -YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 13 SECTION FIVE 2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-16 1 2
WORK AREA Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injur y. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY Double insulated tools are equipped with a polarized plug (one blade is wider than the other .) This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way .Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators . There is an increased risk of electric shock if your body is grounded.Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord to carr y the tool or pull the plug from an outlet. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately . Damaged cords increase the risk of electric shock. When operating the tool outside, use an outdoor extension cord marked “W - A” or “W .”These cords are rated for outdoor use and reduce the risk of elec- tric shock. 4 3 CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injur y. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTEprovides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. IMPOR TANT SAFEGUARDS People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker . WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer , birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonr y products, and arsenic and chromium from chemically-treated lumber . Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. WARNING: Handling the power cord on this product may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. SA VE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’ s operation. If damaged, have the tool ser viced before using. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool. SERVICE Tool ser vice must be performed only by qualified repair personnel. Ser vice or maintenance by unqualified personnel could result in a risk of injur y. When ser vicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injur y. SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator . IMPOR TANT SAFETY RULES FOR DRILLS For safety and better control, always use both hands to hold tool. If the bit jams and kicks back, having both hands on the drill will make it easier to handle. Always wear eye protection and an OSHA-approved dust mask when drilling. Never hold the work piece in your hand or against your body . Use clamps to anchor the work piece to a stable base. Never drill m aterial too small to be secured properly. Keep hands and drill cord away from the rotating bit. Make sure there are no nails, staples or other foreign objects in the work piece. To prevent accidental starting, always disconnect the plug from the power sour ce before making any adjustments or changing accessories. Never run the drill while carr ying it at your side. If the bit becomes bound in the work piece, release the trigger immediately and prepare for the tool to kickback toward you. Reverse the direction of rotation, then back out the bit by slowly squeezing the trigger . PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injur y. Dress properly . Do not wear loose clothing or jewelr y. Contain long hair . Keep your hair , clothing, and gloves away from moving parts. Loose clothes, jewelr y or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. Remove adjusting keys or wrenches before turning the power tool “ON”. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injur y. Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enables better control of the power tool in unexpected situa- tions.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat or hearing protection must be used for appropriate conditions. TOOL USE AND CARE Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool if the power switch does not turn it “ON” or “OFF”.Any tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally . Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 5 6
FUNCTIONAL DESCRIPTION CONTROLS AND COMPONENTS: 1. 3/8 Variable Speed Drill 2. Chuck Key OPERA TING INSTRUCTIONS Disconnect the power plug from the AC power source before any assembly, adjustments, or adding/removing accessories. Following this preventative step reduces the risk of the drill coming on acciden- tally and the risk of damage to the workpiece and injur y to the operator . 8 7 Make sure all accessories are rated for the recommended speed of the drill. Brushes, grinding wheels and other accessories may fall apart if run at too high a speed, sending dangerous debris flying at the operator . Use gloves when changing hot bits and accessories to avoid burns. SYMBOLS IMPOR TANT : Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer . SYMBOL NAME EXPLANA TION V Volts Voltage (Potential) A Amperes Current Hz Hertz Frequency (Cycles per Second) W Watt Power Kg Kilograms Weight Alternating Current Type of Current Direct Current Type of Current Alternating or Direct Current Type of Current Earthing Terminal Grounding Terminal Class II Construction Denotes Double Insulation min Minutes Time s Seconds Time ! Diameter Size of Drill Bits, Grinding Wheels, etc. No load speed No-load Rotational Speed .../min Revolutions per Minute Revolutions, Sur face Speed, Strokes, etc. per Minute 1,2,3, … Ring Selector Settings Speed, Torque or Position Settings 1 2
BIT INSER TION • Unplug the drill. Never change bits on a live drill. • Make sure the bit is undamaged, sharp and free from wood or metal shavings. Foreign material on the bit may keep the chuck from tight- ening fully . A loose bit may cause injur y. • Push the bit into the chuck as far as it will go. • Make sure the bit is in the center of the chuck. If the bit is off-cen- ter , it will not be held securely and may fly loose during use causing serious injur y. • Insert the chuck key into one of the three chuck holes. Rotate the chuck key clockwise to lock the bit in place. • Remove the chuck key .Always run the drill for one minute before drilling to make sure the bit is properly seated. If the bit needs to be adjusted, unplug the drill before touching the bit. BIT REMOV AL • Unplug the drill. • Insert the chuck key into one of the three chuck holes. Rotate the chuck key counter clockwise to unlock the bit. • Remove the bit. 9 OPERA TING THE ON/OFF SWITCH Squeeze the trigger switch to turn the tool “ON”. Release the trigger switch to turn the tool “OFF”. When drilling for extended periods, the “Lock-On” switch may be used, but do not use this switch in situations where the drill is likely to bind or kickback. If kickback does occur , the sudden motion of the tool may make it difficult to release the “Lock- On” switch and turn the drill off. SPEED CONTROL ADJUSTING SWITCH To increase the operating speed of the drill, turn the variable speed control clock- wise. To decrease the speed, turn the variable speed control counter clockwise. REVERSING SWITCH LEVER The reversing switch lever reverses the rotation of the drill bit. It is located just above the trigger switch. AL WAYS turn the motor off and let the bit come to a complete stop before moving the switch. Move the switch to the right for a for ward rotation of the bit. Move the switch to the left to put the bit into reverse. Do not change the direction of a moving bit. Make sure the bit comes to a complete standstill before moving switch. Changing direction while the bit is moving can cause damage to the drill. 10
In certain situations, the bit may bind and the drill will kick- back in the opposite direction. This sudden reaction could lead to loss of con- trol and possible serious injur y. Always be prepared for the possibility of kick- back, especially when breaking through material to complete a hole. DRILLING WOOD • Always clamp the work piece to a steady base. Never hold in your hand or across your legs. • Apply pressure in line with the bit. Applying pressure at an angle could cause the bit to bind or break. • Thin materials that may splinter should be drilled with another piece of wood placed underneath. • Twist bits can be used for wood drilling but will overheat if the flutes are not cleared of wood chips periodically . • To prevent splintering when finishing holes, stop drilling just before the hole breaks through and complete the hole from the other side. DRILLING MASONR Y • Always use carbide tip bits for drilling masonr y. • Use an even pressure, hard enough to keep the drill biting, but not so hard that the bit spins in the hole. Spinning the bit will dull it quickly . Bricks and similar soft materials will take less pressure than a hard material like concrete. DRILLING MET AL • Use an even pressure, hard enough to keep the drill biting, but not so hard that the bit spins in the hole. Spinning the bit will dull it quickly . Soft metals like copper , cast iron, brass or aluminum will take less pressure than harder materials like steel. • When drilling harder metals, use lubricating oil on the tip of the bit. MAINTENANCE AND CLEANING Unplug the drill before performing m aintenance or cleaning. • Never immerse tool in liquid. Never let any liquid inside tool housing. • Clean with a damp cloth and mild soap. Do not use solvents or harsh detergents. • Check brushes periodically . Worn brushes should be replaced by qualified ser v- ice personnel. • Keep air vents clean and free from debris. Blocked air vents can lead to over- heating. ACCESSORIES Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets. If you must use an extension cord, be sure that the gauge is large enough to carr y the amount of current necessar y for your power tool. If not, your tool may experi- ence a loss of power , excessive voltage drop or overheating. The smaller the gauge number , the heavier the cord (see table below). RECOMMENDED SIZES OF EXTENSION CORDS 120 VOL T AC 60 HZ TOOLS TOOL CURRENT RA TING CONDUCTOR SIZE IN A.W .G AMPERE 10FT . 25FT . 50FT . 100FT . 3-6 18 18 18 18 6-8 18 18 18 16 8-10 18 18 18 14 10-12 16 16 14 14 12-16 14 12 12 - 16-20 12 12 12 - 12 11
date the original pur chaser took possession, custody or control of the product, whichever occurred first. This warranty shall be null and void if the product or any component thereof is modified, altered or used for any commer cial purpose or on a jobsite. This warranty does not apply to any other product and/or component thereof manufactured or distributed by Alltrade, and does not apply to products and/or components thereof designed, manufactured and/or assembled by others, for which Alltrade makes no warranties whatsoever . THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF . Warranty Performance By pur chasing the product, pur chaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and/or part is promptly returned to Alltrade’ s facility postage pre-paid and insured (address: ALL TRADE Warranty Claims & Repair , 1431 Via Plata, Long Beach, CA 90810, Attn: Customer Ser vice #1-800-590-3723) within the applicable warranty period, with a written request by pur chaser that Alltrade repair and/or replace the nonconforming item and/or part. We recommend that you keep the original product packaging in the event you need to ship the unit. We suggest the package be insured against loss or in transit damage. When sending your product include your name, address, phone number , dated proof of pur chase (or copy), and a statement about the nature of problem. Warranty coverage is conditioned upon pur chaser furnishing Alltrade with adequate written proof that they are the original pur chaser and of the original pur chase date. Parts returned, freight prepaid and insured, to Alltrade’ s facility (see above address) will be inspected and, at Alltrade’ s option, repaired and/or replaced free of charge if found to be defective and subject to warranty . Alltrade retains the sole discretion to determine whether any item or part is nonconforming and, if so, whether the item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period. Typically , a defective product that is returned within the first 30 days after the pur chase date will be replaced; for items returned after the first 30 days and within the warranty period, covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced, at Alltrade’ s option. During the warranty period, Alltrade will be responsi- ble for the return shipping charges. Alltrade’ s repair and/or replacement of any non- conforming item and/or part thereof shall constitute fulfillment of all obligations to the pur chaser . Alltrade shall not be responsible or liable for any expense, including freight charges, or repairs made outside Alltrade’ s facility , unless expressly agreed to by Alltrade in writing. Under no cir cumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or rental, inconvenience, commer cial loss or consequential damages. 14 SPECIFICA TIONS SPECIFICA TIONS Voltage 120V 60 Hz Rated Current 3.3 A No-Load Speed 0-2700/min Chuck Capacity (max.) !10mm (3/8) OTHER CONSUMER DO-IT -YOURSELF (DIY) TOOLS Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy . If you would like further information on the following products, please contact Alltrade Customer Ser vice Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches SandersJigsawsCir cular Saws Angle Grinders Reciprocating Saws RoutersRotar y Tools Corded and Cordless Multi-Purpose Tools Wide Range of Accessories and more 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail pur chaser of the accompanying KA WASAKI™ portable power tool and no one else all parts of the product (except those parts referred to below which are specifically excluded from such warranty (see Exclusions)) to be free from defects in materials and workmanship for a period of two years from original date of pur chase. SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This Kawasaki™ portable power tool is offered as a home use tool and carries a HOME USE WARRANTY. This toolis made for home use in the execution of projects and repairs in and around the home. Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty . The date of pur chase shall be the date of shipment to the original pur chaser , or the 13
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT . ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENT ATIONS BY ALL TRADE AND/OR ITS REPRESENT ATIVE(S) REGARDING THE DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERA TION OF LA W AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALL TRADE AND/OR ITS REPRESENT ATIVE(S), OR THE PURCHASER, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALL TRADE AND/OR ITS REPRESENT ATIVES. PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS ST ATED ABOVE. Limitation Of Liability IN NO EVENT SHALL ALL TRADE AND/OR ITS REPRESENT ATIVE(S) BE LIABLE FOR INDIRECT , INCIDENT AL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELA TED TO, DIRECTL Y OR INDIRECTL Y, ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALL TRADE AND/OR ITS REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, AND/OR THE EXISTENCE, DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALL TRADE AND/OR ITS REPRESENT ATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO EVENT , WHETHER AS A RESUL T OF A BREACH OF CONTRACT , WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALL TRADE’S AND/OR ITS REPRESENT ATIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT . ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINA TE UPON THE EXPIRA TION OF THE WARRANTY PERIODS SPECIFIED ABOVE. Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages, so part or all of the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which var y from state to state. If your product is not covered by this warranty , please call our Customer Ser vice Department toll free at 1-800-590-3723 for general repair information and charges. 16 ExclusionsThis warranty does not cover parts damaged due to normal wear , abnormal conditions, misapplication, misuse, abuse, accidents, operation at other than recommended pressures or temperatures, improper storage or freight damage. Parts damaged or worn by operation in dusty environments are not warranted. Failure to follow recommended operating and maintenance procedures also voids warranty . This limited warranty does not apply to accessor y items such as drill bits, screwdriving bits, cir cular saw blades, jigsaw blades, grinding wheels, sanding sheets and other related items. DAMAGE TO THE PRODUCT RESUL TING FROM TAMPERING, ACCIDENT , ABUSE, NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REP AIRS OR AL TERA TIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY , USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, COMMERCIAL AND RENT AL APPLICA TIONS OR OTHER CAUSES UNRELA TED TO PROBLEMS WITH MA TERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY . Alltrade will not be liable for the following: labor charges, loss or damage resulting from improper operation, maintenance or repairs made by other persons; pre-delivery services such as assembly, oil or lubricants, and adjustment; maintenance ser vices that are normally required to maintain the product. The use of other than genuine Alltrade Repair Parts will void warranty . Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENT ATIONS BY ALL TRADE AND/OR ITS REPRESENT ATIVE(S) REGARDING THE DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERA TION OF LA W AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALL TRADE AND/OR ITS REPRESENT ATIVE(S), OR THE BUYER, ARE HEREBY EXPRESSL Y EXCLUDED AND DISCLAIMED BY ALL TRADE AND/OR ITS REPRESENT ATIVES. PURCHASER KNOWINGL Y AND WILLINGL Y WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS ST ATED ABOVE. EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY , ORAL OR WRITTEN, OTHER THAN THE ABOVE 15