AllTrade Kawasaki 24V Cordless Impact Wrench 691175 User Manual
Have a look at the manual AllTrade Kawasaki 24V Cordless Impact Wrench 691175 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
COMPONENT #691175 24V BATTERY-OPERATED IMPACT WRENCH INSTRUCTION MANUAL 87-1904-60957 KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUF ACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2005 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810-1462 USA 691175 –24V Black Cordless Impact Wrench THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT.BEFORE USE,READ CAREFULLY AND UNDERST AND ALL CAUTIONS, WARNINGS, INSTR UCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESUL T IN SERIOUS PERSONAL INJUR Y AND/OR PROPER TY DAMAGE. IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALL TRADE PRODUCT ,DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEP ARTMENT AT 1-800-590-3723 .BEFORE YOU CALL, HAVE THE FOLLOWING INFORMA TION AVAILABLE:MODEL No.,DATE PURCHASED AND STORE LOCATION.AN ALLTRADE REPRESENT ATIVE CAN RESOL VE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT ,GIVE US A CALL OR EMAIL US AT:INFO@ALL TRADETOOLS.COM. YOUR FEEDBACK IS VITAL TO US. FOR CUSTOMER SERVICE POUR LE SERVICE APRÉS VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1-800-590-3723 Printed in China
CONGRA TULA TIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Ser vice. If any help or advice is needed, please contact us at 1-800-590-3723. Properly cared for , this tool will give you many years of satisfaction. INTENDED USE This tool is intended for consumer use only . Your charger and/or adapter has been designed for charging batteries of the type approved and supplied with this tool. GENERAL SAFETY RULES—FOR ALL BA TTER Y OPERA TED TOOLS READ AND UNDERST AND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injur y. RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools. Always use common sense and pay particular attention to all the DANGER , WARNING , CAUTION and NOTE statements of this manual. This is the safety alert symbol. It is used to alert you to potential personal injur y hazards. Obey all safety messages that follow this symbol to avoid possible injur y or death. DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injur y. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injur y. 2 TABLE OF CONTENTS CONGRA TULA TIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SECTION ONE GENERAL SAFETY RULES—FOR ALL BA TTER Y OPERA TED TOOLS . .2 RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3 IMPOR TANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SECTION TWO SPECIFIC SAFETY RULES AND /OR SYMBOLS . . . . . . . . . . . . . . . . . . . 6 SAFETY RULES FOR IMP ACT WRENCHES . . . . . . . . . . . . . . . . . . . . . . 6-7 SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SECTION THREE BA TTER Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 REMOVING /ATTACHING BA TTER Y PACK . . . . . . . . . . . . . . . . . . . 9 CHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CHARGING BA TTER Y PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 OPERA TING THE IMP ACT WRENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 12 FORW ARD /REVERSE AND TRIGGER LOCK LEVER . . . . . . . . . . . . 12-13 INST ALLING /REMOVING SOCKET ON THE ANVIL . . . . . . . . . . . . 13 SECTION FOUR MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 SPECIFICA TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 OTHER CONSUMER DO-IT -YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 15 SECTION FIVE 2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-19 1
WORK AREA Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the pres- ence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY Do not abuse the cord. Never use the cord to carr y the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately .Damaged cords may create a fire. A batter y operated tool with integral batteries or a separate batter y pack must be recharged only with the specified charger for the batter y.A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery operated tool only with specifically designatedbatter y pack. Use of any other batteries may create risk of fire.4 CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injur y. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTEprovides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. IMPOR TANT SAFEGUARDS People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker . WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer , birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonr y products, and arsenic and chromium from chemically-treated lumber . Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. WARNING: Handling the power cord on this product may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. SA VE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 3
When batter y pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another . Shorting the batter y terminals together may cause sparks, burns or a fire. Maintain tools with care. Keep cutting tools sharp and clean . Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’ s operation. If damaged, have the tool ser viced before using. Many accidents are caused by poorly maintained tools. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injur y when used on another tool. SERVICE Tool ser vice must be performed only by qualified repair personnel. Ser vice or maintenance by unqualified personnel may result in a risk of injur y. When ser vicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injur y. SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator . SAFETY RULES FOR IMP ACT WRENCH Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust. Do not grasp the tool or place your hands too close to the spinning chuck or drill bit. Your hand may be lacerated or may cause injur y. Secure the material being worked on. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injur y. Position yourself to avoid being caught between the tool or side handle and walls or posts. Should the socket or bit become bound in the work, the reaction torque of the tool could crush your hand or leg. Check to see that keys and adjusting wrenches are removed from the Cordless Impact Wrench before switching the tool “ON”. Keys or wrenches can fly away at high velocity striking you or a bystander . When using the Cordless Impact Wrench, always maintain a firm grip on the tool with both hands. PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injur y. Dress properly . Do not wear loose clothing or jewelr y. Contain long hair . Keep your hair , clothing, and gloves away from moving parts. Loose clothes, jewelr y or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is in the locked or “OFF” position before inserting batter y pack. Carr ying power tools with your finger on the switch or inserting batter y pack into a tool with the power switch “on” invites accidents.Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injur y. Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enable better control of the tool in unexpected situations. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. TOOL USE AND CARE Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool if the power switch does not turn it “ON” or “OFF”.A tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect battery pack from tool or place the switch in the locked or “OFF”position before making any adjustments, changing accessories, or storing the tool. Such preventative safety measures reduce the risk of starting the tool accidentally. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 5
BA TTER Y Before using battery pack, please read carefully all instructions and cautionary markings on batter y pack, batter y charger and product using batter y. Do not incinerate the batter y pack even if it is severely damaged or is completely worn out. The batter y pack can explode. Do not carr y batter y packs in aprons, pockets, or tool boxes, product kit boxes, drawers, etc. with loose metal objects. batter y pack terminals could be short circuited causing damage to the batter y pack, severe burns or fire. The batter y pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic material by the Environmental Protection Agency .Before disposing of damaged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these batter y packs, take them to your local recycling center for proper disposal, or call 1-800-CLEANUP . The batter y is not fully charged. Before first use, the batter y pack requires 3-5 hours charge time to be fully charged. Subsequent recharging needs 1 hour for the batter y to be fully charged. Always switch to a fresh batter y when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life. Never over -discharge a batter y by using the tool even after tool performance has decreased. Do not attempt to discharge a tool’ s batter y by continuing to pull on the tool trigger . When tool per formance begins to diminish, stop the tool and recharge the batter y for optimal per formance. Charge batter y pack at ambient temperatures between 50° F – 104° F. Store tool and batter y pack in locations where temperatures will not exceed 120°F . This is important to prevent serious damage to the batter y cells. The batter y pack should always be recharged when the Cordless Impact Wrench begins to run slowly . When batter y pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another .Shorting the batter y terminals together may cause sparks, burns, or fire. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a live wire will also make exposed metal parts of the tool live and shock the operator . Keep the handle of the Cordless Impact Wrench dry, clean, and free from oil and grease.Do not run the Cordless Impact Wrench while carr ying it at your side. A spinning socket or bit could become entangled with clothing and injur y may result. Disconnect the plug or remove the battery pack from tool and place the switch in the locked or “OFF” position before making any assembly adjustments, changing accessories, performing any inspection, maintenance or cleaning procedures. Such preventive safety measures reduce the risk of starting the tool accidentally . Do not use the Cordless Impact Wrench if it has been damaged, left outdoors in the rain, snow , wet or damp environments, or immersed in liquid. Maintain labels and nameplates on the Cordless Impact Wrench. These carr y important information. If unreadable or missing, contact Alltrade for a replacement. SYMBOLS IMPOR TANT : Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer . SYMBOL NAME EXPLANA TION V Volts Voltage (Potential) A Amperes Current Hz Hertz Frequency (Cycles per Second) W Watt Power Kg Kilograms Weight Alternating Current Type of Current Direct Current Type of Current Alternating or Direct Current Type of Current Earthing Terminal Grounding Terminal Class II Construction Denotes Double Insulation min Minutes Time s Seconds Time ! Diameter Size of Drill Bits, Grinding Wheels, etc. No load speed No-load Rotational Speed .../min Revolutions per Minute Revolutions, Sur face Speed, Strokes, etc. per Minute 1,2,3, … Ring Selector Settings Speed, Torque or Position Settings 8
CHARGING BA TTER Y PACK CHARGE BA TTER Y PACK: 1. Make sure the trigger on the Cordless Impact Wrench is in the “OFF” position and remove the batter y pack from the Impact Wrench. 2. Insert the batter y pack into the charger . Be sure that the batter y pack is fully seated in the charg- er. Do not for ce. 3. Plug the charger into the nearest 120 volt, electrical outlet. The indicator light will come “ON” . INDICA TOR LIGHTS OF CHARGER RED Power On The Charger is power on. Batter y - Faulty The batter y life may end or the batter y voltage may be in extraordinar y conditions. Please unplug the charger , then replace the batter y pack. YELLOW Batter y in High Temperature The batter y pack is overheated. Please wait until the batter y pack cools down, or take it out from the charger temporarily to be cooled off. Batter y in Low Temperature The batter y pack’ s temperature is too low . Please wait untl the batter y pack’ s temperature rises to 50°F . Incorrect Batter y Type The batter y pack is unspecified or has failed. Please replace the batter y pack with a new one. GREEN Fast Charging The batter y is under Quick Charging. Fully Charged The charging is completed. Please take the batter y pack out from the charger , then unplug the charger from the power supply outlet. 10 REMOVING / ATTACHING BA TTER Y PACK REMOVE BA TTER Y PACK: 1. Press both release buttons on either side of the Impact Wrench to release the bat- ter y pack. 2. Pull batter y pack free of Impact Wrench. ATTACH BA TTER Y PACK: 1. Align the raised portion of the batter y pack with the groove in the batter y compart- ment of the Impact Wrench. 2. Press the batter y pack into place. Make sure the latches are securely fastened. Do not use the Impact Wrench if the batter y pack is not seated properly . CHARGER Before using batter y charger , please read carefully all instructions and cautionar y markings on batter y charger , batter y pack and product using batter y.The charger will not automatically turn “OFF” when the batter y pack is fully charged. The charging indicator light will remain “ON” until the charger is disconnected from the electrical outlet. Use only the charger which accompanied your product or direct replacement as listed in this manual. Do not substitute any other charger . Use only Alltrade approved chargers with your product. Do not disassemble charger . Do not use charger if it has been damaged, left outdoors in the rain, snow , wet or damp environments, or immersed in liquid. The batter y pack and charger heat during charging. Place the charger on a flat, non-flammable sur face away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and batter y pack. When the batter y pack requires recharging, a 1 hour charge allows the tool to operate at full power .A charging indicator light on the charger will illuminate to show that charging is taking place. 9 RELEASE BUTTON BATTERY PACK BATTERY CHARGER
OPERA TING THE IMP ACT WRENCH Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet. Always turn the switch “OFF” and remove the batter y pack before changing bits. VARIABLE SPEED TRIGGER SWITCH Never tape the trigger switch down to provide continuous high speed.The tool may fail under such conditions causing fire or personal injur y. THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH: • The speed of the Cordless Impact Wrench depends on the amount of pres- sure you put on the trigger . • The more pressure you apply , the faster the Cordless Impact Wrench will go. • Release the pressure and the Cordless Impact Wrench will slow down. FORW ARD / REVERSE AND TRIGGER LOCK LEVER Be sure the trigger is released when changing the position of the lever . Always store the tool in the “LOCKED/OFF” position. Always check the direction of the Cordless Impact Wrenchs rotation before use. 12 IMPOR TANT INFORMA TION FOR RECHARGING HOT BA TTERIES When using your Cordless Impact Wrench continuously , the batteries in your bat- tery pack will become hot. You should let a hot battery pack cool down for approxi- mately30 minutes before attempting to recharge. When the batter y pack becomes discharged and is hot, the red light on the charger will flash. When the batter y pack cools down, the red light will glow continuously to indicate fast charging mode, 1-hour charge time.This will occur when continuous use of your Cordless Impact Wrench causes the batter y pack to become hot. It does not occur under normal circumstances. FUNCTIONAL DESCRIPTION CONTROLS AND COMPONENTS: 1. Variable Speed Trigger Switch 2. For ward/Reverse and Trigger Lock Lever 3. Gear Enclosure 4. Release Buttons on Each Side 5. Charger COMPONENT MODEL NUMBER CHARGER 691173 BA TTER Y PACK 691174 8 5 1 2 9 3 7 10 11 4 6 6. LED Charging Indicators 7. Anvil 8. Comfort Rubber Grip 9. Batter y Pack ACCESSORIES:10. 1/2 Drive Impact Socket (4) 11. 5 x 1/2 Drive Extension Bar TRIGGER SWITCH
This Cordless Impact Wrench is lubricated before it leaves the factor y. This lubrication should last for the life of the tool. No further lubrication is required. Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear . Always clean the batter y pack using only a dry cloth. Do not use liquids. Always unplug the charger before cleaning it. Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth. Never open the Cordless Impact Wrench case, batter y pack or charger .Do not attempt to repair the Cordless Impact Wrench, batter y pack or charger yourself. Opening any of these parts will void your warranty . ACCESSORIES Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets. If you must use an extension cord, be sure that the gauge is large enough to carr y the amount of current necessar y for your power tool. If not, your tool may experience a loss of power , excessive voltage drop or overheating. The smaller the gauge number , the heavier the cord (see table below). RECOMMENDED SIZES OF EXTENSION CORDS 120 VOL T AC 60 HZ TOOLS TOOL CURRENT RA TING CONDUCTOR SIZE IN A.W .G AMPERE 10FT . 25FT . 50FT . 100FT . 3-6 18 18 18 18 6-8 18 18 18 16 8-10 18 18 18 14 10-12 16 16 14 14 12-16 14 12 12 - 16-20 12 12 12 - 14 TO SELECT THE DIRECTIONS OF ROT ATION: • To select for ward Cordless Impact Wrench rotation, press the trigger lock from left to right flat against the Cordless Impact Wrench body . • To select reverse, press the trigger lock lever in the oppo- site direction. • The center position locks the tool. INST ALLING / REMOVING SOCKET ON THE ANVIL When removing the socket or bit from the tool, avoid contact with skin and use proper protective gloves when grasping the socket, bit or accessor y.Accessories may be hot after prolonged use. When installing a socket, align the holes in the side of the socket with the dent pin. Press the socket on until the dent pin engages in the hole. To remove a socket, depress the dent pin through the hole using a small pointed object and pull the socket off. MAINTENANCE AND CLEANING Always remove the battery pack before attempting cleaning or maintenance. 13 Reve rse Lock Fo rward TRIGGER LOCK
2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail pur chaser of the accompanying KA WASAKI™ portable power tool and no one else all parts of the product (except those parts referred to below which are specifically excluded from such warranty (see Exclusions)) to be free from defects in materials and workmanship for a period of two years from original date of pur chase. SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This Kawasaki™ portable power tool is offered as a home use tool and carries a HOME USE WARRANTY. This toolis made for home use in the execution of projects and repairs in and around the home. Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty . The date of pur chase shall be the date of shipment to the original pur chaser , or the date the original pur chaser took possession, custody or control of the product, whichever occurred first. This warranty shall be null and void if the product or any component thereof is modified, altered or used for any commer cial purpose or on a jobsite. This warranty does not apply to any other product and/or component thereof manufactured or distributed by Alltrade, and does not apply to products and/or components thereof designed, manufactured and/or assembled by others, for which Alltrade makes no warranties whatsoever .THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF . Warranty Performance By pur chasing the product, pur chaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and/or part is promptly returned to Alltrade’ s facility postage pre-paid and insured (address: ALL TRADE Warranty Claims & Repair , 1431 Via Plata, Long Beach, CA 90810, Attn: Customer Ser vice #310-522-9008) within the applicable warranty period, with a written request by pur chaser that Alltrade repair and/or replace the nonconforming item and/or part. We recommend that you keep the original product packaging in the event you need to ship the unit. We suggest the package be insured against loss or in transit damage. When sending your product include your name, address, phone number , dated proof of pur chase (or copy), and a statement about the nature of problem. Warranty coverage is conditioned upon pur chaser furnishing Alltrade with adequate written proof that they are the original pur chaser and of the original pur chase date. Parts returned, freight prepaid and insured, to Alltrade’ s facility (see above address) will be inspected and, at Alltrade’ s option, repaired and/or replaced free of charge if found to be defective and subject to warranty . Alltrade retains the sole discretion to determine whether any item or part is nonconforming and, if so, whether the 16 SPECIFICA TIONS SPECIFICA TIONS Voltage 24V Speed 0-2200 (no load) rpm Impacts Per Minute 0-4400 bpm Maximum Torque 240 ft.lbs. Charger Input 120V 60Hz Charger Output 24V DC, 1.9A Charging Time Approx. 1 Hour Batter y Type Ni-Cad PROTECTING THE ENVIRONMENT BA TTERIES Alltrade batteries can be recharged many times. At the end of their useful life, recy- cle batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-CLEANUP. Collected batteries will be recycled or disposed of properly. OTHER CONSUMER DO-IT -YOURSELF (DIY) TOOLS Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy . If you would like further information on the following products, please contact Alltrade Customer Ser vice Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches SandersJigsawsCir cular Saws Angle Grinders Reciprocating Saws RoutersRotar y Tools Corded and Cordless Multi-Purpose Tools Wide Range of Accessories and more 15
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENT ATIONS BY ALL TRADE AND/OR ITS REPRESENT ATIVE(S) REGARDING THE DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERA TION OF LA W AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALL TRADE AND/OR ITS REPRESENT ATIVE(S), OR THE BUYER, ARE HEREBY EXPRESSL Y EXCLUDED AND DISCLAIMED BY ALL TRADE AND/OR ITS REPRESENT ATIVES. PURCHASER KNOWINGL Y AND WILLINGL Y WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS ST ATED ABOVE. EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY , ORAL OR WRITTEN, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT . ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENT ATIONS BY ALL TRADE AND/OR ITS REPRESENT ATIVE(S) REGARDING THE DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERA TION OF LA W AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALL TRADE AND/OR ITS REPRESENT ATIVE(S), OR THE PURCHASER, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALL TRADE AND/OR ITS REPRESENT ATIVES. PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS ST ATED ABOVE. Limitation Of Liability IN NO EVENT SHALL ALL TRADE AND/OR ITS REPRESENT ATIVE(S) BE LIABLE FOR INDIRECT , INCIDENT AL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELA TED TO, DIRECTL Y OR INDIRECTL Y, ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALL TRADE AND/OR ITS REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, AND/OR THE EXISTENCE, DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALL TRADE AND/OR ITS REPRESENT ATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO EVENT , WHETHER AS A RESUL T OF A BREACH OF CONTRACT , 18 item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period. Typically , a defective product that is returned within the first 30 days after the pur chase date will be replaced; for items returned after the first 30 days and within the warranty period, covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced, at Alltrade’ s option. During the warranty period, Alltrade will be responsi- ble for the return shipping charges. Alltrade’ s repair and/or replacement of any non- conforming item and/or part thereof shall constitute fulfillment of all obligations to the pur chaser . Alltrade shall not be responsible or liable for any expense, including freight charges, or repairs made outside Alltrade’ s facility , unless expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or rental, inconvenience, commer cial loss or consequential damages. ExclusionsThis warranty does not cover parts damaged due to normal wear , abnormal conditions, misapplication, misuse, abuse, accidents, operation at other than recommended pressures or temperatures, improper storage or freight damage. Parts damaged or worn by operation in dusty environments are not warranted. Failure to follow recommended operating and maintenance procedures also voids warranty . This limited warranty does not apply to accessor y items such as drill bits, screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding sheets and other related items. DAMAGE TO THE PRODUCT RESUL TING FROM TAMPERING, ACCIDENT , ABUSE, NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REP AIRS OR ALTERA TIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY , USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, COMMERCIAL AND RENT AL APPLICA TIONS OR OTHER CAUSES UNRELA TED TO PROBLEMS WITH MA TERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY . Alltrade will not be liable for the following: labor charges, loss or damage resulting from improper operation, maintenance or repairs made by other persons; pre-delivery services such as assembly, oil or lubricants, and adjustment; maintenance ser vices that are normally required to maintain the product. The use of other than genuine Alltrade Repair Parts will void warranty . Warranty Disclaimers 17