AllTrade Kawasaki 192V Cordless Worklight 690081 User Manual

							FOR 
CUSTOMER 
SERVICE
POUR 
LE SERVICE 
APRÉS 
VENTE
OU 
DU 
CONSOMMATEUR
PARA 
EL SERVICIO
PARA 
EL CONSUMIDOR
1-800-590-3723
Printed 
in China
87-1904-60957
KAWASAKI™ 
IS A TRADEMARK 
LICENSED 
BY KAWASAKI™ 
MOTORS 
CORP
.,
U.S.A., 
WHICH 
DOES 
NOT MANUF
ACTURE 
OR DISTRIBUTE 
THIS 
PRODUCT
.
CONSUMER 
INQUIRES 
SHOULD 
BE DIRECTED 
TO:
©COPYRIGHT 
2006 
ALLTRADE 
TOOLS, 
LLC.
1431 
VIA PLATA
LONG 
BEACH, 
CA 90810-1462 
USA
690081_19.2V 
Black 
Cordless 
Worklight_Rev 
7/07/06
THIS 
MANUAL 
CONT
AINS 
IMPOR
TANT 
INFORMA
TION 
REGARDING 
SAFETY
,OPERA
TION,
MAINTENANCE 
AND 
STORAGE 
OF 
THIS 
PRODUCT
.BEFORE 
USE,
READ 
CAREFULL
Y AND
UNDERST
AND 
ALL 
CAUTIONS,
WARNINGS,
INSTR
UCTIONS 
AND 
PRODUCT 
LABELS.
FAILURE
TO 
DO 
SO 
COULD 
RESUL
T IN SERIOUS 
PERSONAL 
INJUR
Y AND/OR 
PROPER
TY 
DAMAGE.
IF YOU 
SHOULD 
HAVE 
ANY 
QUESTIONS 
OR 
EXPERIENCE 
A PROBLEM 
WITH 
YOUR 
ALL
TRADE
PRODUCT
,DO 
NOT 
RETURN 
THIS 
PRODUCT 
TO 
THE 
STORE.
PLEASE 
CALL 
OUR 
CUSTOMER
SERVICE 
DEP
ARTMENT 
AT 1-800-590-3723
.BEFORE 
YOU 
CALL,
HAVE 
THE 
FOLLOWING
INFORMA
TION 
AVAILABLE:
MODEL 
NO.,
DATE 
PURCHASED 
AND 
STORE 
LOCA
TION.
AN 
ALL
TRADE 
REPRESENT
ATIVE 
CAN 
RESOL
VE 
YOUR 
PROBLEM 
OVER 
THE 
PHONE.
IF YOU
WOULD 
LIKE 
TO 
MAKE 
A SUGGESTION 
OR 
COMMENT
,GIVE 
US 
A CALL 
OR 
EMAIL 
US 
AT:
INFO@ALL
TRADETOOLS.COM.
YOUR 
FEEDBACK 
IS VITAL 
TO 
US.
19.2V 
BATTERY-OPERATED
WORKLIGHT
INSTRUCTION 
MANUAL
COMPONENT#690081-1HR  
						

							CONGRA
TULA
TIONS!
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
products 
at 
an 
affordable 
price, 
and 
we 
want 
you 
to 
be 
totally 
satisfied 
with 
your
product 
and 
our 
Customer 
Ser
vice. 
If 
any 
help 
and 
advice 
is 
needed, 
please 
contact 
us 
at 
1-800-590-3723. 
Properly 
cared 
for
, this 
tool 
will 
give 
you 
many 
years 
of 
satisfaction.
INTENDED 
USE
This 
tool 
is intended 
for 
consumer 
use 
only
. Your 
charger 
and/or 
adapter 
has 
been
designed 
for 
charging 
batteries 
of 
the 
type 
approved 
and 
supplied 
with 
this 
tool.
RECOGNIZE 
SAFETY 
SYMBOLS, 
WORDS 
AND 
LABELS
READ 
AND 
UNDERST
AND 
ALL 
INSTRUCTIONS.
Failure 
to
follow 
all 
instructions 
listed 
below 
may 
result 
in 
electric 
shock, 
fire 
and/or 
serious 
personal 
injur
y.
The safety instructions provided in this manual are not intended to cover all possible
conditions 
and 
practices 
that 
may 
occur 
when 
operating, 
maintaining 
and 
cleaning
power 
tools.
Always 
use 
common 
sense 
and 
pay 
particular 
attention 
to 
all 
the 
DANGER
, 
WARNING
, CAUTION
and 
NOTE
statements 
of 
this 
manual.
This 
is the 
safety 
alert 
symbol. 
It is used 
to 
alert
you 
to 
potential 
personal 
injur
y hazards. 
Obey 
all
safety 
messages 
that 
follow 
this 
symbol 
to 
avoid
possible 
injur
y or 
death.
DANGER
indicates an imminently hazardous 
situation 
which, 
if not 
avoided, 
will 
result 
in death
or 
serious 
injur
y.
WARNING
indicates a potentially hazardous 
situation 
which, 
if not 
avoided, 
could 
result 
in
death 
or 
serious 
injur
y.
TABLE 
OF 
CONTENTS
CONGRA
TULA
TIONS!
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
INTENDED 
USE
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
SECTION 
ONE
RECOGNIZE 
SAFETY 
SYMBOLS, 
WORDS 
AND 
LABELS
 . . . . . . . . . . . .
2-3
IMPOR
TANT 
SAFEGUARDS
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
BA
TTER
Y TOOL 
USE 
AND 
CARE
 . . . . . . . . . . . . . . . . . . . . . . . . . .
4
SERVICE
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
SECTION 
TWO
SAFETY 
RULES 
FOR 
WORKLIGHT
 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
SYMBOLS
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
SECTION 
THREE
FUNCTIONAL 
DESCRIPTION
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
BA
TTER
Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-9
REMOVING/A
TTACHING 
BA
TTER
Y PACK
 . . . . . . . . . . . . . . . . . . . .
7
CHARGER
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
CHARGING 
BA
TTER
Y PACK
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
OPERA
TING 
THE 
WORKLIGHT
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-11
OPERA
TING 
THE 
ON/OFF 
SWITCH
 . . . . . . . . . . . . . . . . . . . . . . . . .
10
ADJUSTING 
THE 
WORKLIGHT 
BEAM
 . . . . . . . . . . . . . . . . . . . . . .
10
REPLACING 
THE 
LIGHT 
BULB
 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-11
SECTION 
FOUR
MAINTENANCE 
AND 
CLEANING
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
ACCESSORIES
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
SPECIFICA
TIONS
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
PROTECTING 
THE 
ENVIRONMENT
 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
OTHER 
CONSUMER 
DO-IT
-YOURSELF 
(DIY) 
TOOLS
 . . . . . . . . . . . . . .
13
SECTION 
FIVE
2 YEAR 
LIMITED 
WARRANTY
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13-16
1
2  
						

							BA
TTER
Y TOOL 
USE 
AND 
CARE
Ensure 
the 
switch 
is in 
the 
off 
position 
before 
inserting 
batter
y pack.
Inserting 
the
batter
y pack 
into 
power 
tools 
that 
have 
the 
switch 
on 
invites 
accidents.
Recharge 
only 
with 
the 
charger 
specified 
by 
the 
manufacturer
.A charger 
that 
is
suitable 
for 
one 
type 
of 
batter
y pack 
may 
create 
a risk 
of 
fire 
when 
used 
with 
another 
batter
y pack.
Use 
power 
tools 
only 
with 
specifically 
designated 
batter
y packs.
Use 
of 
any 
other
batter
y packs 
may 
create 
a risk 
of 
injur
y and 
fire.
When 
batter
y pack 
is not 
in 
use, 
keep 
it away 
from 
other 
metal 
objects 
like 
paper
clips, 
coins, 
keys, 
nails, 
screws, 
or 
other 
small 
metal 
objects 
that 
can 
make 
a
connection 
from 
one 
terminal 
to 
another
.Shorting 
the 
batter
y terminals 
together
may 
cause 
burns 
or 
a fire.
Under 
abusive 
conditions, 
liquid 
may 
be 
ejected 
from 
the 
batter
y, avoid 
contact.
If contact 
accidentally 
occurs, 
flush 
with 
water
. If liquid 
contacts 
eyes, 
additionally
seek 
medical 
help. 
Liquid 
ejected 
from 
the 
batter
y may 
cause 
irritation 
or 
burns.
SERVICE
Have 
your 
power 
tool 
ser
viced 
by 
a qualified 
repair 
person 
using 
only 
identical
replacement 
parts.
This 
will 
ensure 
that 
the 
safety 
of 
the 
power 
tool 
is maintained.
SAFETY 
RULES 
FOR 
WORKLIGHT
Use battery operated tool only with specifically designated
batter
y pack.
Use 
of 
any 
other 
batteries 
may 
create 
risk 
of 
fire.
Keep 
the 
handle 
of 
the 
Worklight 
dry, clean, 
and 
free 
from 
oil 
and 
grease.
Do 
not 
run 
the 
Worklight 
while 
carr
ying 
it at 
your 
side.
The 
worklight 
heats 
up
immediately 
when 
in use 
and 
could 
result 
in burns.
Do 
not 
use 
the 
Worklight 
if it has 
been 
damaged, 
left 
outdoors 
in 
the 
rain, 
snow
,
wet 
or 
damp 
environments, 
or 
immersed 
in 
liquid.
Maintain 
labels 
and 
nameplates 
on 
the 
Worklight. 
These 
carr
y important 
informa-
tion. 
If unreadable 
or 
missing, 
contact 
Alltrade 
for 
a replacement.
Batter
y pack 
must 
be 
recharged 
only 
with 
the 
specified 
charger 
for 
the 
batter
y.A
charger 
that 
may 
be 
suitable for one type of battery may create a risk of fire when used
with another battery.
Do 
not 
use 
in 
a damp 
or 
wet 
environment.
Store 
out 
of 
reach 
of 
children 
and 
other 
untrained 
persons.
4
CAUTION
indicates a potentially hazardous 
situation 
which, 
if 
not 
avoided, 
may 
result 
in
minor 
or 
moderate 
injur
y.
CAUTION
used 
without 
the 
safety 
alert 
symbol
indicates 
a potentially 
hazardous 
situation 
which,
if not 
avoided, 
may 
result 
in property 
damage.
NOTEprovides additional information that is useful
for 
proper 
use 
and 
maintenance 
of 
this 
tool. 
If a
NOTE 
is indicated 
make 
sure 
it is fully 
understood.
IMPOR
TANT 
SAFEGUARDS
People 
with 
electronic 
devices, 
such 
as 
pacemakers, 
should 
consult 
their
physician(s) 
before 
using 
this 
product. 
Operation 
of 
electrical 
equipment 
in
close 
proximity 
to 
a heart 
pacemaker 
could 
cause 
interference 
or 
failure 
of
the 
pacemaker
.
WARNING:
Some 
dust 
created 
by 
power 
sanding, 
sawing, 
grinding, 
drilling 
and
other 
construction 
activities 
contains 
chemicals 
known 
to 
the 
State 
of 
California
to 
cause 
cancer
, birth 
defects 
or 
other 
reproductive 
harm.
Some 
examples 
of 
these 
chemicals 
are:
• Lead 
from 
lead-based 
paints. 
• Crystalline 
silica 
from 
bricks 
and 
cement 
and 
other 
masonr
y products,
and 
arsenic 
and 
chromium 
from 
chemically-treated 
lumber
.
Your 
risk 
from 
these 
exposures 
varies, 
depending 
on 
how 
often 
you 
do 
this 
type
of 
work. 
To reduce 
your 
exposure 
to 
these 
chemicals: 
work 
in 
a well 
ventilated
area, 
and 
work 
with 
approved 
safety 
equipment, 
such 
as 
dust 
masks 
that 
are
specially 
designed 
to 
filter 
out 
microscopic 
particles.
WARNING: 
Handling 
the 
power 
cord 
on 
corded 
products 
may 
expose 
you 
to
lead, 
a chemical 
known 
to 
the 
State 
of 
California 
to 
cause 
cancer 
and 
birth
defects 
or 
other 
reproductive 
harm.
Wash 
hands 
after 
handling.
SA
VE 
THESE 
INSTRUCTIONS 
FOR 
FUTURE 
REFERENCE.
3  
						

							FUNCTIONAL 
DESCRIPTION
CONTROLS 
AND 
COMPONENTS:
1. 
Batter
y Pack
2. 
Release 
Buttons 
on 
Each 
Side
3. 
120V 
AC
4. 
Charger
5. 
LED 
Charging 
Indicators
COMPONENT
MODEL 
NUMBER
BA
TTER
Y PACK
691034
CHARGER
690507
6
SYMBOLS
IMPOR
TANT
: Some 
of 
the 
following 
symbols 
may 
be 
used 
on 
your 
tool. 
Please
study 
them 
and 
learn 
their 
meaning. 
Proper 
interpretation 
of 
these 
symbols 
will
allow 
you 
to 
operate 
the 
tool 
better 
and 
safer
.
SYMBOL
NAME
EXPLANA
TION
V
Volts
Voltage 
(Potential)
A
Amperes
Current
Hz
Hertz
Frequency 
(Cycles 
per 
Second)
W
Watt
Power
Kg
Kilograms
Weight
Alternating 
Current
Type 
of 
Current
Direct 
Current
Type 
of 
Current
Alternating 
or 
Direct 
Current
Type 
of 
Current
Earthing 
Terminal
Grounding 
Terminal
Class 
II Construction
Denotes 
Double 
Insulation
min
Minutes
Time
s
Seconds
Time
!
Diameter
Size 
of 
Drill 
Bits, 
Grinding 
Wheels, 
etc.
No 
load 
speed
No-load 
Rotational 
Speed
.../min
Revolutions 
per 
Minute
Revolutions, 
Sur
face 
Speed, 
Strokes, 
etc. 
per 
Minute
1,2,3, 
…
Ring 
Selector 
Settings
Speed, 
Torque 
or 
Position 
Settings
5
6
7
8
2
1
45
3
6. 
ON/OFF
Switch
7. 
Reflector 
Rim
ACCESSORIES:8. 
Replacement 
Light 
bulb 
(inside 
unit)  
						

							REMOVING 
/ ATTACHING 
BA
TTER
Y PACK
REMOVE 
BA
TTER
Y PACK:
1. 
Press 
both 
release 
buttons 
on 
either 
side 
of 
the 
Cordless 
Worklight 
to 
release 
the 
batter
y
pack.
2. 
Pull 
batter
y pack 
free 
of 
Cordless
Worklight.
ATTACH 
BA
TTER
Y PACK:
1. 
Align 
the 
raised 
portion 
of 
the 
batter
y pack 
with 
the 
groove 
in the 
batter
y compartment 
of 
the 
Cordless 
Worklight.
2. 
Press 
the 
batter
y pack 
into 
place. 
Make 
sure 
the 
latches 
are 
securely 
fastened. 
Do 
not 
use 
the 
Cordless 
Worklight 
if the 
batter
y pack 
is not 
seated 
properly
. CHARGER
Before 
using 
batter
y charger
, please 
read 
carefully 
all
instructions 
and 
cautionar
y markings 
on 
batter
y charger
, batter
y pack 
and
product 
using 
batter
y.
Use 
only 
the 
charger 
which 
accompanied 
your 
product 
or 
direct 
replacement 
as
listed 
in 
this 
manual. 
Do 
not 
substitute 
any 
other 
charger
. Use 
only 
Alltrade
approved 
chargers 
with 
your 
product.
Do 
not 
disassemble 
charger
.
Do 
not 
use 
charger 
if it has 
been 
damaged, 
left 
outdoors 
in 
the 
rain, 
snow
, wet
or 
damp 
environments, 
or 
immersed 
in 
liquid.
The 
batter
y pack 
and 
charger 
heat 
during 
charging. 
Place 
the 
charger 
on 
a flat, 
non-flammable 
sur
face 
away 
from 
flammable 
materials 
with 
at 
least 
four 
inches 
of
clearance 
to 
allow 
proper 
air 
circulation 
around 
the 
charger 
and 
batter
y pack.
When 
the 
batter
y pack 
requires 
recharging, 
a 1 hour 
charge 
allows 
the 
tool 
to
operate 
at 
full 
power
.A charging 
indicator 
light 
on 
the 
charger 
will 
illuminate 
to
show 
that 
charging 
is taking 
place. 
BA
TTER
Y
Before using battery pack, please read carefully all instruc-
tions and cautionarymarkings 
on 
batter
y pack, 
batter
y charg-
er 
and 
product 
using 
batter
y.
Do 
not 
incinerate 
the 
batter
y pack 
even 
if it is severely 
dam-
aged 
or 
is completely 
worn 
out.
The 
batter
y pack 
can 
explode. 
Do 
not 
carr
y batter
y packs 
in 
aprons, 
pockets, 
or 
tool 
boxes, 
product 
kit
boxes, 
drawers, 
etc. 
with 
loose 
metal 
objects.
Batter
y pack 
terminals 
could
be 
short 
circuited 
causing 
damage 
to 
the 
batter
y pack, 
severe 
burns 
or 
fire.
The 
batter
y pack 
is Nickel-Cadmium 
(Ni-Cad) 
and 
is considered 
to 
be 
a toxic
material 
by 
the 
Environmental 
Protection 
Agency
.Before 
disposing 
of 
dam-
aged 
or 
worn 
out 
Ni-Cad 
batter
y packs, 
check 
with 
your 
State 
Environmental
Protection 
Agency 
to 
find 
out 
about 
special 
restrictions 
on 
the 
disposal 
of 
these
batter
y packs, 
take 
them 
to 
your 
local 
recycling 
center 
for 
proper 
disposal, 
or
call 
1-800-822-8837
.
The 
batter
y is 
not 
fully 
charged. 
Before 
first 
use, 
the 
batter
y pack 
requires 
3-5 
hours 
charge 
time 
to 
be 
fully 
charged. 
Subsequent 
recharging 
needs 
1 hour
for 
the 
batter
y to 
be 
fully 
charged. 
Always 
switch 
to 
a fresh 
batter
y when 
tool 
performance 
begins 
to 
diminish.
Severe heat is most destructive to a battery; the more heat generated, the faster
the battery loses power. A battery that gets too hot can have a shortened life. 
Never 
over
-discharge 
a batter
y by 
using 
the 
tool 
even 
after 
tool 
performance
has 
decreased.
Do 
not 
attempt 
to 
discharge 
a tool’
s batter
y by 
continuing 
to
pull 
on 
the 
tool 
trigger
. When 
tool 
per
formance 
begins 
to 
diminish, 
stop 
the 
tool
and 
recharge 
the 
batter
y for 
optimal 
per
formance.
Charge 
batter
y pack 
at 
ambient 
temperatures 
between 
50°
F – 104°
F. 
Store 
tool 
and 
batter
y pack 
in 
locations 
where 
temperatures 
will 
not 
exceed
120°F
. This 
is important 
to 
prevent 
serious 
damage 
to 
the 
batter
y cells.
The 
batter
y pack 
should 
always 
be 
recharged 
when 
the 
Cordless 
Worklight
begins 
to 
dim. 
When 
batter
y pack 
is 
not 
in 
use, 
keep 
it away 
from 
other 
metal 
objects 
such 
as
paper 
clips, 
coins, 
keys, 
nails, 
screws 
or 
other 
small 
metal 
objects 
that 
can
make 
a connection 
from 
one 
terminal 
to 
another
.Shorting 
the 
batter
y terminals
together 
may 
cause 
sparks, 
burns, 
or 
fire. 
7
8
RELEASE 
BUTTON
®  
						

							9
OPERA
TING 
THE 
ON 
/ OFF 
SWITCH
Press 
the 
“ON/OFF”
switch 
to 
turn 
the 
worklight 
“ON”
and 
“OFF”
.
ADJUSTING 
THE 
WORKLIGHT 
BEAM
Hold 
the 
handle 
of 
the 
Worklight 
securely 
in
one 
hand. 
With 
the 
other 
hand, 
swivel 
the 
head
of 
the 
Worklight 
counter
-clockwise 
until 
it is at
the 
angle 
you 
desire. 
Swivel 
the 
head 
of 
the
Worklight 
clockwise 
to 
return 
it to 
its 
original
position.
REPLACING 
THE 
LIGHT 
BULB
This 
Worklight 
uses 
a Krypton 
19.2V
, 0.6 
A light 
bulb.
Use 
of 
any 
other 
kind
of 
light 
bulb 
may 
cause 
damage 
or 
injur
y.
Parts 
of 
this 
worklight 
heat 
up 
almost 
immediately 
when 
in 
use.
To avoid
burns, 
use 
caution 
when 
handling 
light 
bulb 
and 
metal 
reflector
. Never 
change
a hot 
light 
bulb. 
Bulb 
must 
be 
cool 
to 
the 
touch 
before 
attempting 
to 
remove 
or
replace 
it.
For 
your 
convenience, 
a spare 
light 
bulb 
is 
included
inside 
the 
unit. 
Unscrew 
the 
rim 
and 
carefully 
remove 
it 
from 
the 
light
assembly
. 
10
CHARGING 
BA
TTER
Y PACK
CHARGE 
BA
TTER
Y PACK:
1. 
Plug 
the 
charger 
into 
the 
nearest
120 
volt 
electrical 
outlet. 
The 
step 
of
the 
batter
y has 
positive 
and 
terminal
markings 
on 
it. 
Align 
the 
markings
on 
the 
identical 
markings 
on 
the 
top
of 
the 
charger 
base. 
Insert 
the 
batter
y pack 
into 
base. 
Pack 
will 
not
insert 
properly 
if reversed.
2. 
Make 
sure 
the 
trigger 
on 
the
Cordless 
Worklight 
is in the 
“OFF”
position 
and 
remove 
the 
batter
y pack 
from 
the 
Cordless 
Worklight.
3. 
If, 
when 
first 
inserting 
the 
batter
y pack, 
the 
red 
“ON”
button 
does 
not 
light 
up,
press 
the 
“SET” 
button 
on 
the 
charger
. When 
the 
batter
y is charging, 
the 
red
light 
is “ON”
.
4. 
After 
approximately 
one 
hour 
of 
charging, 
the 
red 
indicator 
light 
should 
go
“OFF”
and 
the 
green 
light 
should 
come 
“ON”
. The 
green 
light 
indicates 
that 
the
batter
y is fully 
charged.
5. 
When 
fully 
charged, 
reattach 
batter
y pack 
onto 
Cordless 
Worklight, 
making 
cer-
tain 
latches 
fasten 
securely
. Cordless 
Worklight 
will 
not 
operate 
properly 
if the
batter
y pack 
is not 
saeted 
properly
.
OPERA
TING 
THE 
WORKLIGHT
Parts 
of 
this 
Worklight 
heat 
up 
almost 
immediately 
when
in use.To avoid burns, use caution when handling light bulb and metal reflector.
Never change a hot light bulb. Bulb must be cool to the touch before attempting
to 
remove 
or 
replace 
it.
UP
BATTERY PACK
BATTERY
CHARGER  
						

							ACCESSORIES
Use 
only 
accessories 
that 
are 
recommended 
by 
the 
manufacturer 
for 
your 
model.
Accessories 
that 
may 
be 
suitable 
for 
one 
tool 
may 
become 
hazardous 
when 
used 
on
another 
tool.
Always 
attach 
grounded 
(3-prong) 
extension 
cords 
to 
grounded 
(3-hole) 
outlets.
If you 
must 
use 
an 
extension 
cord, 
be 
sure 
that 
the 
gauge 
is large 
enough 
to carr
y
the 
amount 
of 
current 
necessar
y for 
your 
power 
tool.
If 
not, 
your 
tool 
may 
experience 
a loss 
of 
power
, excessive 
voltage 
drop 
or 
overheating. 
The 
smaller 
the
gauge 
number
, the 
heavier 
the 
cord 
(see 
table 
below).
RECOMMENDED 
SIZES 
OF 
EXTENSION 
CORDS 
120 
VOL
T AC 
60 
HZ 
TOOLS
TOOL 
CURRENT 
RA
TING
CONDUCTOR 
SIZE 
IN 
A.W
.G
AMPERE
10FT
.
25FT
.
50FT
.
100FT
.
3-6
18
18
18
18
6-8
18
18
18
16
8-10
18
18
18
14
10-12
16
16
14
14
12-16
14
12
12
-
16-20
12
12
12
-
SPECIFICA
TIONS
SPECIFICA
TIONS
Voltage
19.2V 
Light 
Bulb 
Type
Krypton 
19.2V 
0.6 
A
Charger 
Input
120V 
60Hz
Charging 
Time
Approx. 
1 Hour
Batter
y Type
Ni-Cad
PROTECTING 
THE 
ENVIRONMENT
BA
TTERIES
Alltrade 
batteries 
can 
be 
recharged 
many 
times. 
At 
the 
end 
of 
their 
useful 
life, 
recy-
cle 
batteries 
with 
due 
care 
for 
our 
environment. 
Ni-Cad 
and 
Ni-MH 
batteries 
are 
recyclable. 
Take 
them 
to 
your 
local 
recycling 
center
or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.
1. 
Remove 
the 
batter
y pack 
from 
the
Worklight.
2. 
Hold 
the 
top 
of 
the 
Worklight 
with
one 
hand 
while 
twisting 
the 
rim 
in a
counter
-clockwise 
direction 
with 
the
other
. Continue 
turning 
until 
the 
rim
comes 
loose. 
3. 
Remove 
the 
bulb 
by 
turning 
it slightly
and 
pulling 
it out 
of 
the 
bulb 
fitting.
Be 
careful 
not 
to 
damage 
the 
delicate
parts 
inside 
the 
case. 
4. 
Insert 
the 
new 
bulb, 
then 
carefully
put 
the 
rim 
back 
in place 
and 
turn 
it clockwise 
to 
tighten 
it.MAINTENANCE 
AND 
CLEANING
Always 
remove 
the 
batter
y pack 
before 
attempting
cleaning 
or 
maintenance.
Use 
only 
mild 
soap 
and 
a damp 
cloth 
to 
clean 
the 
tool.
Never 
let 
any 
liquid 
get
inside 
the 
casing. 
Never 
immerse 
any 
part 
of 
the 
tool 
in 
a liquid. 
Always 
keep 
the
ventilation 
openings 
clear
.
Always 
clean 
the 
batter
y pack 
using 
only 
a dry cloth. 
Do 
not 
use 
liquids. 
Always 
unplug 
the 
charger 
before 
cleaning 
it.
Regularly 
clean 
the 
ventilation 
slots 
in 
your 
tool 
and 
charger 
using 
only 
a soft
brush 
or 
dry cloth.
Never 
open 
the 
Worklight 
case, 
batter
y pack 
or 
charger
.Do 
not 
attempt 
to 
repair
the 
Worklight, 
batter
y pack 
or 
charger 
yourself. 
Opening 
any 
of 
these 
parts 
will 
void
your 
warranty
.
Use 
only 
authorized 
replacement 
parts 
for 
your 
tool.
Equipment 
ser
vice 
must 
be 
per
formed 
only 
by 
qualified 
repair 
personnel 
using
authorized 
replacement 
parts. 
Ser
vice 
or 
maintenance 
by 
unqualified 
personnel
could 
result 
in 
considerable 
risk 
of 
personal 
injur
y. Use 
of 
unauthorized 
parts 
or 
failure 
to 
follow 
maintenance 
instructions 
may 
create 
a risk 
of 
electric 
shock 
or
injur
y.
11
12
REPLACEMENT
BULB  
						

							and/or 
components 
thereof 
designed, 
manufactured 
and/or 
assembled 
by 
others,
for 
which 
Alltrade 
makes 
no 
warranties 
whatsoever
.THERE 
ARE 
NO 
WARRANTIES
WHICH 
EXTEND 
BEYOND 
THE 
DESCRIPTION 
ON 
THE 
FACE 
HEREOF
.
Warranty 
Performance 
By 
pur
chasing 
the 
product, 
pur
chaser 
expressly 
acknowledges 
and 
agrees 
that 
their
sole 
and 
exclusive 
remedy 
under 
this 
warranty 
shall 
be 
strictly 
limited 
to 
the 
repair
or 
replacement 
of 
any 
covered 
nonconforming 
items 
or 
parts 
thereof 
provided 
that
any 
such 
nonconforming 
item 
and/or 
part 
is promptly 
returned 
to 
Alltrade’
s facility
postage 
pre-paid 
and 
insured 
(address: 
ALL
TRADE 
Warranty 
Claims 
& 
Repair
, 
1431 
Via 
Plata, 
Long 
Beach, 
CA 
90810, 
Attn: 
Customer 
Ser
vice 
#1-800-590-3723)
within 
the 
applicable 
warranty 
period, 
with 
a written 
request 
by 
pur
chaser 
that
Alltrade 
repair 
and/or 
replace 
the 
nonconforming 
item 
and/or 
part. 
We recommend
that 
you 
keep 
the 
original 
product 
packaging 
in the 
event 
you 
need 
to 
ship 
the 
unit.
We suggest 
the 
package 
be 
insured 
against 
loss 
or 
in 
transit 
damage. 
When 
sending 
your 
product 
include 
your 
name, 
address, 
phone 
number
, dated 
proof 
of 
pur
chase 
(or 
copy), 
and 
a statement 
about 
the 
nature 
of 
problem. 
Warranty 
coverage 
is 
conditioned 
upon 
pur
chaser 
furnishing 
Alltrade 
with 
adequate 
written
proof 
that 
they 
are 
the 
original 
pur
chaser 
and 
of 
the 
original 
pur
chase 
date. 
Parts
returned, 
freight 
prepaid 
and 
insured, 
to 
Alltrade’
s facility 
(see 
above 
address) 
will
be 
inspected 
and, 
at 
Alltrade’
s option, 
repaired 
and/or 
replaced 
free 
of 
charge 
if
found 
to 
be 
defective 
and 
subject 
to 
warranty
. Alltrade 
retains 
the 
sole 
discretion 
to 
determine 
whether 
any 
item 
or 
part 
is 
nonconforming 
and, 
if so, 
whether 
the 
item 
and/or 
part 
will 
be 
repaired 
and/or 
replaced. 
If the 
unit 
is 
repaired, 
new 
or
reconditioned 
replacement 
parts 
may 
be 
used. 
If 
Alltrade 
chooses 
to 
replace 
the 
product, 
it may 
replace 
it with 
a new 
or 
reconditioned 
one 
of 
the 
same 
or 
comparable 
design. 
The 
repaired 
or 
replaced 
unit 
will 
be 
warranted 
under 
the 
terms
of 
the 
remainder 
of 
the 
warranty 
period. 
Typically
, a defective 
product 
that 
is
returned 
within 
the 
first 
30 
days 
after 
the 
pur
chase 
date 
will 
be 
replaced; 
for 
items
returned 
after 
the 
first 
30 
days 
and 
within 
the 
warranty 
period, 
covered 
defective
parts 
not 
subject 
to 
normal 
wear 
and 
tear 
or 
other 
exclusions 
will 
be 
repaired 
or
replaced, 
at Alltrade’
s option. 
During 
the 
warranty 
period, 
Alltrade 
will 
be 
responsi-
ble 
for 
the 
return 
shipping 
charges. 
Alltrade’
s repair 
and/or 
replacement 
of 
any 
non-
conforming item and/or part thereof shall constitute fulfillment of all 
obligations 
to 
the 
pur
chaser
. Alltrade 
shall 
not 
be 
responsible 
or 
liable 
for 
any
expense, 
including 
freight 
charges, 
or 
repairs 
made 
outside 
Alltrade’
s facility
, unless
expressly 
agreed 
to 
by 
Alltrade 
in 
writing. 
Under 
no 
circumstances 
shall 
Alltrade
bear 
any 
responsibility 
for 
loss 
of 
the 
unit, 
loss 
of 
time 
or 
rental, 
inconvenience,
commer
cial 
loss 
or 
consequential 
damages.
14
OTHER 
CONSUMER 
DO-IT
-YOURSELF 
(DIY) 
TOOLS
Alltrade 
offers 
a full 
range 
of 
Kawasaki™ 
tools 
that 
make 
DIY 
jobs 
easy
. If you 
would
like 
further 
information 
on 
the 
following 
products, 
please 
contact 
Alltrade 
Customer
Ser
vice 
Department 
at 1-800-590-3723. 
Cordless 
Drills/Screwdrivers
Impact 
Wrenches
SandersJigsawsCir
cular 
Saws
Angle 
Grinders
Reciprocating 
Saws
RoutersRotar
y Tools
Corded 
and 
Cordless 
Multi-Purpose 
Tools
Wide 
Range 
of 
Accessories 
and 
more
2 YEAR 
LIMITED 
HOME 
USE 
WARRANTY
Express 
and 
Exclusive 
Limited 
Home 
Use 
Warranty 
to 
Original 
Retail 
Buyer
Alltrade 
Tools 
LLC 
(hereinafter 
Alltrade) 
expressly 
warrants 
to 
the 
original 
retail
pur
chaser 
of 
the 
accompanying 
KA
WASAKI™
portable 
power 
tool 
and 
no 
one 
else
all 
parts 
of 
the 
product 
(except 
those 
parts 
referred 
to 
below 
which 
are 
specifically
excluded 
from 
such 
warranty 
(see 
Exclusions)) 
to 
be 
free 
from 
defects 
in materials
and 
workmanship 
for 
a period 
of 
two 
years 
from 
original 
date 
of 
pur
chase.
SPECIAL 
WARRANTY 
NOTE 
TO 
CONTRACTORS 
AND 
COMMERCIAL 
USERS:
This
Kawasaki™ 
portable 
power 
tool 
is offered 
as
a home 
use 
tool 
and 
carries 
a HOME
USE WARRANTY.
This toolis made for home use in the execution of 
projects 
and 
repairs 
in 
and 
around 
the 
home.
Use 
of 
the 
tool
for 
COMMERCIAL 
PURPOSES 
OR 
ON 
A JOBSITE
is
not
covered 
under 
this 
warranty
.
The 
date 
of 
pur
chase 
shall 
be 
the 
date 
of 
shipment 
to 
the 
original 
pur
chaser
, or 
the
date 
the 
original 
pur
chaser 
took 
possession, 
custody 
or 
control 
of 
the 
product,
whichever occurred first.
This warranty shall be null and void if the product or any
component 
thereof 
is modified,
altered 
or 
used 
for 
any 
commer
cial 
purpose 
or 
on
a jobsite.
This 
warranty 
does 
not 
apply 
to 
any 
other 
product 
and/or 
component
thereof 
manufactured 
or 
distributed 
by 
Alltrade, 
and 
does 
not 
apply 
to 
products
13  
						

							WARRANTY 
IS 
MADE 
WITH 
REGARD 
TO 
THIS 
PRODUCT
. ALL 
EXPRESS 
AND/OR
IMPLIED 
WARRANTIES, 
GUARANTIES 
AND/OR 
REPRESENT
ATIONS 
BY 
ALL
TRADE
AND/OR 
ITS 
REPRESENT
ATIVE(S) 
REGARDING 
THE 
DESIGN, 
MANUF
ACTURE,
PURCHASE, 
USE 
AND/OR 
OPERA
TION 
OF 
THE 
PRODUCT 
OR 
ANY 
COMPONENT
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY 
OPERA
TION 
OF 
LA
W 
AND/OR 
EQUITY 
AND/OR 
BY 
ANY 
ACT 
OR 
OMISSION 
OF
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S), 
OR 
THE 
PURCHASER, 
INCLUDING
BUT 
NOT 
LIMITED 
TO 
THE 
IMPLIED 
WARRANTY 
OF 
MERCHANT
ABILITY 
AND 
THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY
EXCLUDED 
AND 
DISCLAIMED 
BY 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVES.
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH 
WARRANTIES 
AND 
RIGHTS, 
CLAIMS 
AND/OR 
CAUSES 
OF 
ACTION 
ARISING
THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE 
REMEDY 
IS 
AS 
ST
ATED 
ABOVE.
Limitation 
Of 
Liability
IN 
NO 
EVENT 
SHALL 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S) 
BE 
LIABLE 
FOR
INDIRECT
, INCIDENT
AL, 
SPECIAL 
AND/OR 
CONSEQUENTIAL 
DAMAGES 
OF 
ANY
KIND 
ARISING 
OUT 
OF 
OR 
RELA
TED 
TO, 
DIRECTL
Y OR 
INDIRECTL
Y, ANY 
BREACH
OF 
ANY 
PROVISION 
OF 
ANY 
AGREEMENT 
BETWEEN 
ALL
TRADE 
AND/OR 
ITS 
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, 
AND/OR 
THE 
EXISTENCE, 
DESIGN, 
MANUF
ACTURE, 
PURCHASE, 
USE 
AND/OR
OPERA
TION 
OF 
ANY 
ITEM(S) 
SOLD 
HEREUNDER 
EVEN 
IF ALL
TRADE 
AND/OR 
ITS
REPRESENT
ATIVE(S) 
HAS 
BEEN 
ADVISED 
OF 
THE 
POSSIBILITY 
OF 
ANY 
SUCH
DAMAGES. 
IN 
NO 
EVENT
, WHETHER 
AS 
A RESUL
T OF 
A BREACH 
OF 
CONTRACT
,
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL 
ALL
TRADE’S 
AND/OR 
ITS 
REPRESENT
ATIVE(S)’ 
LIABILITY 
EXCEED 
THE 
PRICE 
OF
THE 
PRODUCT
. ANY 
AND 
ALL 
LIABILITY 
CONNECTED 
WITH 
THE 
USE 
OF 
THIS 
PRODUCT 
SHALL 
TERMINA
TE 
UPON 
THE 
EXPIRA
TION 
OF 
THE 
WARRANTY
PERIODS 
SPECIFIED 
ABOVE.
Limitations 
on 
Warranty 
Disclaimers 
Some 
states 
do 
not 
allow 
limitations 
on 
how 
long 
an 
implied 
warranty 
lasts 
and 
some 
states 
do 
not 
allow 
the 
exclusion 
or 
limitation 
of 
the 
incidental 
or 
consequential 
damages, 
so 
part 
or 
all 
of 
the 
above 
limitations 
or 
exclusions 
may 
not
apply 
to 
you. 
This 
warranty 
gives 
you 
specific 
legal 
rights, 
and 
you 
may 
also 
have
other 
rights 
which 
var
y from 
state 
to 
state.
If your 
product 
is 
not 
covered 
by 
this 
warranty
, please 
call 
our 
Customer 
Ser
vice
Department 
toll 
free 
at 1-800-590-3723 
for 
general 
repair 
information 
and 
charges.
16
ExclusionsThis 
warranty 
does 
not 
cover 
parts 
damaged 
due 
to 
normal 
wear
, abnormal 
conditions, 
misapplication, 
misuse, 
abuse, 
accidents, 
operation 
at 
other 
than 
recommended 
pressures 
or 
temperatures, 
improper 
storage 
or 
freight 
damage.
Parts 
damaged 
or 
worn 
by 
operation 
in 
dusty 
environments 
are 
not 
warranted.
Failure to follow recommended operating and maintenance procedures also 
voids 
warranty
.
This 
limited 
warranty 
does 
not 
apply 
to 
accessor
y 
items 
such 
as 
drill 
bits, 
screwdriving 
bits, 
circular 
saw 
blades, 
jigsaw 
blades, 
grinding 
wheels, 
sanding
sheets 
and 
other 
related 
items.
DAMAGE 
TO 
THE 
PRODUCT 
RESUL
TING 
FROM 
TAMPERING, 
ACCIDENT
, ABUSE,
NEGLIGENCE, 
FAILURE 
TO 
FOLLOW 
INSTRUCTIONS, 
UNAUTHORIZED 
REP
AIRS
OR 
ALTERA
TIONS, 
DAMAGE 
WHILE 
IN 
TRANSIT 
TO 
OUR 
SERVICE 
FACILITY
, 
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, 
COMMERCIAL 
AND 
RENT
AL 
APPLICA
TIONS 
OR 
OTHER 
CAUSES 
UNRELA
TED 
TO
PROBLEMS 
WITH 
MA
TERIAL 
OR 
WORKMANSHIP 
ARE 
NOT 
COVERED 
BY 
THIS
WARRANTY
.
Alltrade 
will 
not 
be 
liable 
for 
the 
following: 
labor 
charges, 
loss 
or 
damage 
resulting
from improper operation, maintenance or repairs made by other persons; 
pre-delivery services such as assembly, oil or lubricants, and adjustment; 
maintenance 
ser
vices 
that 
are 
normally 
required 
to 
maintain 
the 
product.
The 
use 
of 
other 
than 
genuine 
Alltrade 
Repair 
Parts 
will 
void 
warranty
.
Warranty 
Disclaimers 
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, 
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY
PROVIDED 
ABOVE, 
ALL 
OTHER 
EXPRESS 
WARRANTIES, 
GUARANTIES 
AND/OR
REPRESENT
ATIONS 
BY 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S) 
REGARDING
THE 
DESIGN, 
MANUF
ACTURE, 
PURCHASE, 
USE 
AND/OR 
OPERA
TION 
OF 
THE
PRODUCT 
OR 
ANY 
COMPONENT 
THEREOF 
SOLD 
HEREUNDER, 
REGARDLESS 
OF
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,
WRITTEN 
OR 
ORAL, 
ARISES 
BY 
OPERA
TION 
OF 
LA
W 
AND/OR 
EQUITY 
AND/OR 
BY
ANY 
ACT 
OR 
OMISSION 
OF 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S), 
OR 
THE
BUYER, 
ARE 
HEREBY 
EXPRESSL
Y EXCLUDED 
AND 
DISCLAIMED 
BY 
ALL
TRADE
AND/OR 
ITS 
REPRESENT
ATIVES. 
PURCHASER 
KNOWINGL
Y 
AND 
WILLINGL
Y
WAIVES 
ANY 
AND 
ALL 
SUCH 
WARRANTIES 
AND 
RIGHTS, 
CLAIMS 
AND/OR 
CAUSES 
OF 
ACTION 
ARISING 
THEREFROM 
OR 
BASED 
THEREON. 
PURCHASER’S
SOLE 
AND 
EXCLUSIVE 
REMEDY 
IS 
AS 
ST
ATED 
ABOVE.
EXCLUSION 
AND 
DISCLAIMER 
OF 
ALL 
IMPLIED 
WARRANTIES, 
INCLUDING 
THE
IMPLIED 
WARRANTIES 
OF 
MERCHANT
ABILITY 
AND 
FITNESS 
FOR 
A PARTICULAR
PURPOSE. 
NO 
WARRANTY
, ORAL 
OR 
WRITTEN, 
OTHER 
THAN 
THE 
ABOVE 
15