AllTrade Kawasaki 192V Cordless Drill 840131 User Manual

TNENOPMOC
RH1-131048#
LLI
R
D 
DET
A
REP
O-Y
RETT
A
B 
DEEPS-2 V2.91
LAUNAM NOITCURTSNI

ECIVRES REMOTSUC ROF
ETNEV SÉRPA ECIVRES EL RUOP
RUETAMMOSNOC UD UO
OICIVRES LE ARAP
RODIMUSNOC LE ARAP
3273-095-008-1
 anihC ni detnirP

75906-4091-78
™IKASAWAK YB DESNECIL KRAMEDART A SI™IKASAWAK
 RO ERUTCAFUNAM TON SEOD HCIHW ,.A.S.U ,.PROC SROTOM
EB DLUOHS SERIUQNI REMUSNOC .TCUDORP SIHT ETUBIRTSID
:OT DETCERID
.CLL ,SLOOT EDARTLLA 6002 THGIRYPOC©
ATALP AIV 1341
ASU 2641-01809 AC ,HCAEB GNOL
60/62/8 veR_llirD...

SECTION FOUR
MAINTENANCE AND CLEANING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ACCESSORIES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PROTECTING THE ENVIRONMENT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  . . . . . . . . . . . . . . 18
SECTION FIVE
3 YEAR LIMITED WARRANTY . . ....

DANGERindicates an imminently hazardous 
situation which, if not avoided, will result in death
or serious injury.
WARNINGindicates a potentially hazardous 
situation which, if not avoided, could result in
death or serious injury.
CAUTIONindicates a potentially hazardous 
situation which, if not avoided, may result in
minor or moderate injury.
CAUTIONused without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
NOTEprovides...

SERVICE
Tool service must be performed only by qualified repair personnel.Service or
maintenance by unqualified personnel may result in a risk of injury. 
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual. Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of shock or injury.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
Hold tool by insulated gripping surfaces when perform-
ing an operation where the...

FUNCTIONAL DESCRIPTION
CONTROLS AND COMPONENTS:
1. Battery Pack
2. Release Buttons on Each Side
3. Charger
4. Indicator Lights
5. 12.7mm (1/2) Keyless Chuck
6. 22 Adjustable Torque Settings
Control Ring
7. Forward/Reversing and 
Trigger Lock Lever
COMPONENT MODEL NUMBERBATTERY PACK 690549CHARGER 69054312.7mm (1/2) KEYLESS CHUCK 690552
8
Do not use the Cordless Drill if it has been damaged, left outdoors in the
rain, snow, wet or damp environments, or immersed in liquid.
Maintain labels and nameplates on...

BATTERY
Before using battery pack, please read carefully all instruc-
tions and cautionarymarkings on battery pack, battery
charger and product using battery.
Do not incinerate the battery pack even if it is severely dam-
aged or is completely worn out.The battery pack can explode.
Do not carry battery packs in aprons, pockets, or tool
boxes, product kit boxes, drawers, etc. with loose metal objects.Battery
pack terminals could be short circuited causing damage to the battery pack,
severe burns or fire....

CHARGING BATTERY PACK
CHARGE BATTERY PACK:
1. Plug the charger into 
the nearest 120 volt 
electrical outlet.
2. Make sure the trigger 
on the Cordless Drill 
is in the “OFF”
position and remove 
the battery pack from 
the Cordless Drill.
3. Insert the battery pack
into the charger. Be sure
that the battery pack is
fully seated in the charger. 
Do not force. 
4. The red indicator light should come “ON”indicating that the battery pack is in
a “Fast Charge” mode. If the green indicator light comes “ON”,...

THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE:
• For light duty work, use lower settings.
• For heavy duty work, use higher settings.
PROPER SETTING FOR DRIVING SCREWS:
1. Set the ring on the lowest 
setting to begin.
2. Try tightening the first screw. 
If the drill drives smoothly, 
proceed with the next screw.
3. If the Drill’s clutch slips, 
increase the torque setting 
and try again until the Drill 
drives the screw without incident.
HIGH/LOW SPEED (GEAR) SHIFTING
FOR LOW SPEED SETTING:
• Slide the...

• Never try to start a stalled Drill by clicking the trigger switch “ON”and “OFF”.
This may damage your tool.
• To reduce jamming, always keep the Drill running when pulling the bit out of a 
finished hole.
SCREWDRIVING:
• Always use the correct type and size of screwdriver bit.
• If screws are difficult to tighten, try applying a small amount of washing liquid or
soap as a lubricant.
• Always hold the tool and screwdriver bit in a straight line with the screw.
MAINTENANCE AND CLEANING
Always remove the...

PROTECTING THE ENVIRONMENT
BATTERIES
Alltrade batteries can be recharged many times. At the end of their useful life, 
recycle batteries with due care for our environment. 
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center
or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the...