AllTrade Kawasaki 192V Cordless Circular Saw With Laser 691191 User Manual
Have a look at the manual AllTrade Kawasaki 192V Cordless Circular Saw With Laser 691191 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
POCKET CUTTING POCKET CUTTING If the blade binds, release the trigger immediately . Do not move the saw until the blade comes to a complete stop. Find the cause of the binding before starting the saw again. If the blade becomes pinched, twisted, misaligned or bound, it will stall and lift up out of the work piece, suddenly jerking back toward the operator .This reaction is referred to as KICKBACK. • Mark out the line to be cut so it is easily visible. • Start inside the area to be cut out. • Set the shoe against the work piece at an angle. • Lift the blade guard. • Pull the trigger to start the saw . • When the blade reaches full speed, slowly feed the blade into the work piece. When the blade starts cutting, release the blade guard. 20 GENERAL CUTTING Always hold the saw in front of you and away from your body . Keep your hands and feet well away from the work piece. Never feed the blade into the work piece until the blade is at full speed. If the blade is not at full speed, the saw may kick back causing serious personal injur y. Do not force the saw . Excessive force may result in a broken blade. Use only enough pressure to keep the saw moving through the work piece. • Put on eye protection. • Clear the saw of any foreign material. • Make sure the work piece is held securely in place. Hold smaller pieces in a vise or attach to the workbench with clamps. • Mark out the line to be cut so it is easily visible. • Check the lower guard for damage. If damaged, do not use tool. • Always use the right blade for the material. • Make sure all bolts, screws and locking levers are secure before starting tool. • Pull the trigger to start the saw . • Set the shoe against the work piece. • When the blade reaches full speed, slowly feed the blade into the work piece. When the blade starts cutting, release the blade guard. 19
LASER SAFETY NEVER LOOK DIRECTL Y INTO THE LASER BEAM OR POINT THE LASER AT ANYONE ELSE. Laser beam can cause eye injur y. Laser should only be aimed at the work piece. NEVER POINT THE LASER AT REFLECTIVE SURF ACES. Laser beam can reflect into eyes and cause injur y. Highly polished or metallic sur faces should NOT be cut using the laser . DO NOT ATTEMPT TO INCREASE THE LASER’S OUTPUT . Tampering with the laser could lead to personal injur y. REPLACING LASER BA TTERIES The laser runs on two AAA batteries which are located beneath the “ON/OFF” switch.When the laser light begins to dim, change both batteries. Remove batteries before putting the cir cular saw into storage. Batteries may leak and cause damage if the laser is not used for over 90 days. TO CHANGE LASER BA TTERIES: 1. Open batter y compartment cover . 2. Make sure batteries are correctly positioned according to the posi- tive/negative markings on the com- partment. 3. Close cover . 22 USING THE LASER Use of controls or adjustments or performance of proce- dures other than those specified herein may result in hazardous radiation exposure. Sharp blows may affect the accuracy of this laser . Avoid striking the laser housing. • Mark the desired line of cut so it is easily visible. • Set the shoe against the work piece. • Push laser “ON/OFF” switch to “ON” . • Adjust the laser line until it lines up with the cut line marking. Blade will now be in the proper position to make your cut. • Pull the trigger to start the saw . • When the blade reaches full speed, slowly feed the blade into the work piece. When the blade starts cutting, release the blade guard. • DO NOT for ce saw . Allow saw to cut at its own rate. • Cut straight lines only . Attempting to cut a cur ve will bend the blade which could result in personal injur y or damage to the tool. • If you need to stop in the middle of a cut, turn off the saw and allow it to come to a complete stop before removing it from the material. • When the cut is finished, turn off the laser light. TRIGGER LASER ON/OFF SWITCH PENCIL LINELASER LINE
ACCESSORIES Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets. If you must use an extension cord, be sure that the gauge is large enough to carr y the amount of current necessar y for your power tool. If not, your tool may experi- ence a loss of power , excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table below). RECOMMENDED SIZES OF EXTENSION CORDS 120 VOL T AC 60 HZ TOOLS TOOL CURRENT RA TING CONDUCTOR SIZE IN A.W .G AMPERE 10FT . 25FT . 50FT . 100FT . 3-6 18 18 18 18 6-8 18 18 18 16 8-10 18 18 18 14 10-12 16 16 14 14 12-16 14 12 12 - 16-20 12 12 12 - SPECIFICA TIONS SPECIFICA TIONS Voltage 19.2V Switch On/Off Switch Charger Input 120V 60Hz Charging Time Approx. 1 hour No Load Speed (RPM) 3700/Min. Blade Diameter !140mm (5-1/2) Batter y Type Ni-Cad Laser Class II Laser Power 1.0mw(min.) 2.0mw (max.) Laser Wavelength 650nm Laser Beam Diameter 1mm (at aperture)24 MAINTENANCE AND CLEANING Always remove the battery pack before attempting cleaning or maintenance. This Circular Saw is lubricated before it leaves the factor y. This lubrication should last for the life of the tool. No further lubrication is required. Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear . Always clean the batter y pack using only a dry cloth. Do not use liquids. Always unplug the charger before cleaning it. Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth. Inspect all mounting screws regularly . Tighten any loose screws. Failure to keep the mounting screws tight could result in serious injuries. Never open the Cordless Circular Saw case, batter y pack or charger .Do not attempt to repair the Cordless Cir cular Saw , batter y pack or charger yourself. Opening any of these parts will void your warranty . 23
2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail pur chaser of the accompanying KA WASAKI™ portable power tool and no one else all parts of the product (except those parts referred to below which are specifically excluded from such warranty (see Exclusions)) to be free from defects in materials and workmanship for a period of two years from original date of pur chase. SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This Kawasaki™ portable power tool is offered as a home use tool and carries a HOME USE WARRANTY. This toolis made for home use in the execution of projects and repairs in and around the home. Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty . The date of pur chase shall be the date of shipment to the original pur chaser , or the date the original pur chaser took possession, custody or control of the product, whichever occurred first. This warranty shall be null and void if the product or any component thereof is modified, altered or used for any commer cial purpose or on a jobsite. This warranty does not apply to any other product and/or component thereof manufactured or distributed by Alltrade, and does not apply to products and/or components thereof designed, manufactured and/or assembled by others, for which Alltrade makes no warranties whatsoever . THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF . Warranty Performance By pur chasing the product, pur chaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and/or part is promptly returned to Alltrade’ s facility postage pre-paid and insured (address: ALL TRADE Warranty Claims & Repair , 1431 Via Plata, Long Beach, CA 90810, Attn: Customer Ser vice #310-522-9008) within the applicable warranty period, with a written request by pur chaser that Alltrade repair and/or replace the nonconforming item and/or part. We recommend that you keep the original product packaging in the event you need to ship the unit. We suggest the package be insured against loss or in transit damage. When sending your product include your name, address, phone number , dated proof of pur chase (or copy), and a statement about the nature of problem. Warranty coverage is conditioned upon pur chaser furnishing Alltrade with adequate written proof that they are the original pur chaser and of the original pur chase date. Parts returned, freight prepaid and insured, to Alltrade’ s facility (see above address) will be inspected and, at Alltrade’ s option, repaired and/or replaced free of charge if found to be defective and subject to warranty . Alltrade retains the sole discretion to determine whether any item or part is nonconforming and, if so, whether the 26 PROTECTING THE ENVIRONMENT BA TTERIES Alltrade batteries can be recharged many times. At the end of their useful life, recycle batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-CLEANUP. Collected batteries will be recycled or disposed of properly. OTHER CONSUMER DO-IT -YOURSELF (DIY) TOOLS Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy . If you would like further information on the following products, please contact Alltrade Customer Ser vice Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches SandersJigsawsCir cular Saws Angle Grinders Reciprocating Saws RoutersRotar y Tools Corded and Cordless Multi-Purpose Tools Wide Range of Accessories and more 25
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENT ATIONS BY ALL TRADE AND/OR ITS REPRESENT ATIVE(S) REGARDING THE DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERA TION OF LA W AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALL TRADE AND/OR ITS REPRESENT ATIVE(S), OR THE BUYER, ARE HEREBY EXPRESSL Y EXCLUDED AND DISCLAIMED BY ALL TRADE AND/OR ITS REPRESENT ATIVES. PURCHASER KNOWINGL Y AND WILLINGL Y WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS ST ATED ABOVE. EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY , ORAL OR WRITTEN, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT . ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENT ATIONS BY ALL TRADE AND/OR ITS REPRESENT ATIVE(S) REGARDING THE DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERA TION OF LA W AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALL TRADE AND/OR ITS REPRESENT ATIVE(S), OR THE PURCHASER, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALL TRADE AND/OR ITS REPRESENT ATIVES. PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS ST ATED ABOVE. Limitation Of Liability IN NO EVENT SHALL ALL TRADE AND/OR ITS REPRESENT ATIVE(S) BE LIABLE FOR INDIRECT , INCIDENT AL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELA TED TO, DIRECTL Y OR INDIRECTL Y, ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALL TRADE AND/OR ITS REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, AND/OR THE EXISTENCE, DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALL TRADE AND/OR ITS REPRESENT ATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH 28 item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period. Typically , a defective product that is returned within the first 30 days after the pur chase date will be replaced; for items returned after the first 30 days and within the warranty period, covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced, at Alltrade’ s option. During the warranty period, Alltrade will be responsi- ble for the return shipping charges. Alltrade’ s repair and/or replacement of any non- conforming item and/or part thereof shall constitute fulfillment of all obligations to the pur chaser . Alltrade shall not be responsible or liable for any expense, including freight charges, or repairs made outside Alltrade’ s facility , unless expressly agreed to by Alltrade in writing. Under no cir cumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or rental, inconvenience, commer cial loss or consequential damages. ExclusionsThis warranty does not cover parts damaged due to normal wear , abnormal conditions, misapplication, misuse, abuse, accidents, operation at other than recommended pressures or temperatures, improper storage or freight damage. Parts damaged or worn by operation in dusty environments are not warranted. Failure to follow recommended operating and maintenance procedures also voids warranty . This limited warranty does not apply to accessor y items such as drill bits, screwdriving bits, cir cular saw blades, jigsaw blades, grinding wheels, sanding sheets and other related items. DAMAGE TO THE PRODUCT RESUL TING FROM TAMPERING, ACCIDENT , ABUSE, NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REP AIRS OR AL TERA TIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY , USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, COMMERCIAL AND RENT AL APPLICA TIONS OR OTHER CAUSES UNRELA TED TO PROBLEMS WITH MA TERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY . Alltrade will not be liable for the following: labor charges, loss or damage resulting from improper operation, maintenance or repairs made by other persons; pre-delivery services such as assembly, oil or lubricants, and adjustment; maintenance ser vices that are normally required to maintain the product. The use of other than genuine Alltrade Repair Parts will void warranty . Warranty Disclaimers 27
30 DAMAGES. IN NO EVENT , WHETHER AS A RESUL T OF A BREACH OF CONTRACT , WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALL TRADE’S AND/OR ITS REPRESENT ATIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT . ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINA TE UPON THE EXPIRA TION OF THE WARRANTY PERIODS SPECIFIED ABOVE. Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages, so part or all of the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which var y from state to state. If your product is not covered by this warranty , please call our Customer Ser vice Department at 1-310-522-9008 or toll free at 1-800-590-3723 for general repair information and charges. 29