AllTrade Kawasaki 144V Cordless Impact Wrench 840150 User Manual

TNENOPMOC
RH1-051048#

 
DET
A
RE
P
O-
Y
RETT
A
B 
V
4.
4
1
H
C
NE
R
W T
C
A
P
MI
LAUNAM NOITCURTSNI
ECIVRES REMOTSUC ROF
ETNEV SÉRPA ECIVRES EL RUOP
RUETAMMOSNOC UD UO
OICIVRES LE ARAP
RODIMUSNOC LE ARAP
3273-095-008-1
 anihC ni detnirP

75906-4091-78
™IKASAWAK YB DESNECIL KRAMEDART A SI™IKASAWAK
 RO ERUTCAFUNAM TON SEOD HCIHW ,.A.S.U ,.PROC SROTOM
EB DLUOHS SERIUQNI REMUSNOC .TCUDORP SIHT ETUBIRTSID
:OT DETCERID
.CLL ,SLOOT EDARTLLA 6002 THGIRYPOC©
ATALP AIV 1341
ASU 2641-01809 AC ,HCAEB GNOL
60/7/8...

CONGRATULATIONS!
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
products at an affordable price, and we want you to be totally satisfied with your
product and our Customer Service. If any help and advice is needed, please 
contact us at 1-800-590-3723. Properly cared for, this tool will give you many 
years of satisfaction.
INTENDED USE
This tool is intended for consumer use only. Your charger and/or adapter has been
designed for charging batteries of the type...

WORK AREA
Keep your work area clean and well lit.Cluttered work benches and dark work
areas may cause accidents or injury.
Do not operate power tools in explosive areas, such as in the presence of 
flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep bystanders, children and visitors away while operating a power tool.
Distractions can cause you to lose control. 
ELECTRICAL SAFETY
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord...

When battery pack is not in use, keep it away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery termi-
nals together may cause sparks, burns or a fire.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools with sharp cutting edge are less likely to bind and are easier to control. 
Check for misalignment or binding of moving parts, breakage of...

SYMBOLS
IMPORTANT: Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
V Volts Voltage (Potential)A Amperes CurrentHz Hertz Frequency (Cycles per Second)W Watt PowerKg Kilograms Weight
Alternating Current Type of CurrentDirect Current Type of CurrentAlternating or Direct Current Type of CurrentEarthing Terminal Grounding TerminalClass II...

BATTERY
Before using battery pack, please read carefully all instruc-
tions and cautionarymarkings on battery pack, battery
charger and product using battery.
Do not incinerate the battery pack even if it is severely
damaged or is completely worn out.The battery pack can
explode. 
Do not carry battery packs in aprons, pockets, or tool boxes, product kit
boxes, drawers, etc. with loose metal objects.battery pack terminals could
be short circuited causing damage to the battery pack, severe burns or fire....

CHARGING BATTERY PACK
CHARGE 
BATTERY PACK:
1. Plug the charger
into the nearest
120 volt electri-
cal outlet.
2. Make sure the
trigger on the
Cordless
Impact Wrench
is in the “OFF”
position and remove the
battery pack from the Cordless Impact Wrench.
3. Insert the battery pack into the charger. Be sure that the battery pack is 
fully seated in the charger. Do not force. 
4. The red indicator light should come “ON”indicating that the battery pack is in
a “Fast Charge” mode. If the green indicator light...

VARIABLE SPEED TRIGGER SWITCH
THIS TOOL IS CONTROLLED 
BY A TRIGGER SWITCH:
• The speed of the Cordless Impact
Wrench depends on the amount of
pressure you put on the trigger.
• The more pressure you apply, the
faster the Cordless Impact Wrench
will go.
• Release the pressure and the
Cordless Impact Wrench will slow
down. 
FORWARD / REVERSE AND TRIGGER LOCK LEVER
Be sure the trigger is released when changing the position of the lever.
Always store the tool in the“LOCKED/OFF”position.
Always check the...

SPECIFICATIONS
SPECIFICATIONS
Voltage 14.4V Speed 0-2500 rpmImpacts Per Minute 3000Maximum Torque 130 ft.lbs.Charger Input 120V  60HzCharging Time Approx. 1 HourBattery Type Ni-Cad
PROTECTING THE ENVIRONMENT
BATTERIES
Alltrade batteries can be recharged many times. At the end of their useful life, recy-
cle batteries with due care for our environment. 
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center
or call 1-800-822-8837. Collected batteries will be recycled or...

found to be defective and subject to warranty. Alltrade retains the sole discretion 
to determine whether any item or part is nonconforming and, if so, whether the 
item and/or part will be repaired and/or replaced. If the unit is repaired, new or
reconditioned replacement parts may be used. If Alltrade chooses to replace 
the product, it may replace it with a new or reconditioned one of the same or 
comparable design. The repaired or replaced unit will be warranted under the terms
of the remainder of...