AllTrade Air Plus 11 Gal Air Compressor 540010 User Manual

Model / Modéle / Modelo 
#540010
4.7/3.04.7/3.0
* Based Upon Peak Electrical Current Consumption • * Puissance Déterminée en Fonction de la Consommation Électrique • * Calculado en Base a la Corriente Pico Consumida
3.5 PEAK HP*/ 3.5HP*EN POINTE / 3.5HP*DE PICO
11
GALLON
GALONES
OIL LUBRICATED AIR
COMPRESSOR
COMPRESSEUR DAIR
LUBRIFIÉ PAR HUILE
COMPRESOR DE AIRE 
CON LUBRICACIÓN 
DE ACEITE
INSTRUCTION MANUAL
Do Not Return Your Compressor to the Store!  Call 1-800-423-3598 For Help!
MANUEL DINSTRUCTIONS
Ne...

Instruction Manual
It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the prod-
uct label and instruction manual prior to operation of this unit. The owner/operator shall retain product instructions for future reference.
The owner and/or operator is responsible for maintenance, maintaining all decals or warning labels and while in use, maintaining the
unit in good working order. If the owner and/or operator is not fluent in English,...

THE FOLLOWING SIGNAL WORDS ARE USED TO EMPHASIZE SAFETY WARNINGS THAT MUST BE FOLLOWED WHEN USING THIS
AIR COMPRESSOR:
Indicates an imminently hazardous situation that, if not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, MAY result in minor or moderate injury.
Indicates important information, which if not followed, MAY cause...

Protect your eyes. The operation of any air compressor can result in foreign objects being thrown into the eyes, which can result in
severe eye damage. Always wear eye protection that meets ANSI Z28.1 specifications during air compressor operation. Eyeglasses are
not always safety glasses.
Be responsible for your hearing. Wear hearing protection during extended periods of operation.
Use the right tool. Use tools properly and for their intended task. Do not force a small tool to do the job of a heavy-duty...

DRAIN LIQUID FROM AIR TANK DAILY- Use the drain valve located on the bottom of the air tank to drain. Failure to properly drain liq-
uid from the tank will cause rust from moisture buildup, which weakens the tank and could lead to a violent tank explosion. Periodically
inspect the tanks for unsafe conditions such as corrosion, cracked welds, and leaks.
Release air slowly when draining moisture or depressurizing the air compressor. Fast moving air will stir up dust, dirt and debris that
may be harmful....

RISK OF FLYING OBJECTS- Do not direct compressed air stream at people or pets. The powerful compressed air stream can damage
exposed skin and easily propel loose dirt and other small objects at high-speed, resulting in serious injury. Always wear eye protection
that meets ANSI Z28.1 specifications. Use only OSHA approved air blowguns. Never leave a pressurized air compressor unattended.
Shut off air compressor and relieve pressure before performing maintenance or repairs. Do not move the air compressor...

GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Improper installation of the grounding plug can result in a risk of electric...

3.AUTOMATIC ON/OFF PRESSURE SWITCH: This compressor is equipped with an automatic on/off pressure switch. The compressor
will only run when the switch is in the “I” (ON) position. Once the tank has reached the desired preset pressure (“cut-out” pres-
sure), the pump motor will automatically shut off. While the switch is in the “I” (ON) position, the pump motor will automatically
turn back on once the pressure in the tank drops below the minimum preset pressure (“cut-in” pressure).
DO NOT LEAVE THE...

IT MAY BE NECESSARY TO BRACE OR SUPPORT ONE END OF THE AIR COMPRESSOR WHEN ATTACHING THE WHEELS AND THE
RUBBER FEET, BECAUSE THE AIR COMPRESSOR WILL HAVE A TENDENCY TO TIP.
Installing Wheels:
The wheels must be installed prior to operating the compressor.
1.Insert supplied wheel bolt through hole in center of wheel.
2.Place the end of the bolt on the wheel subassembly through the corresponding hole in the wheel
ground iron located on the base of the air tank.
3.Slide lock washer over end of wheel bolt....

DO NOT OPERATE THE COMPRESSOR WITHOUT LUBRICANT, OR WITH LOW LUBRICATION LEVEL. ALLTRADE IS NOT RESPONSIBLE
FOR DAMAGE CAUSED TO THE COMPRESSOR DUE TO OPERATION WITHOUT PROPER LUBRICATION.
STEP 5 - INSPECTION CHECK
Assembly Check:
In order to complete the assembly of your new air compressor, a careful inspection should be made to ensure that all of the parts are
properly aligned and securely fastened.
1.Inspect wheels to ensure that they are properly mounted and secured to ground irons.
2.Inspect rubber...